When looking for an original fence design, wrought iron gates and sections are an excellent solution. Metal elements in the form of geometric shapes, patterns and whole pictures give them sophistication. Such gates will definitely become the highlight of the landscape design of the site.
Without experience, making forged sashes yourself will not be easy. But if you carry out the work under the step-by-step supervision of a master, then this problem can be solved. If the owners want to get a high-quality masterpiece, then it is better to order a gate from specialists.
Users often search for:
- How to make a gate with your own hands
- How to make a gate in a private house
Cold Forging Tools
TORSION (Twister) - Twisting tool
With their help, tetrahedral rods or strips of metal are twisted in the longitudinal direction. The result is twisted columns, which are also called torsion bars.
Estimated cost 9000 rub.
SNAIL tool for curls
Device for forming flat curls of different sizes for gates. Market value from 15,000 rubles.
Bending machines or benders.
Bending machines or benders. Allows you to bend rods or reinforcement at the required angle anywhere. Estimated cost 12,000 rubles.
Cold forging machine
With the help of Gnutik, you can roll an arc of almost any radius in several steps. The price for this is low productivity and repeatability of elements. Market value from 6,000 rubles.
Rolling press
Devices for processing the ends of parts - inertial stamping machines or other home-made devices.
A press is needed to form the ends of the rods. This machine works on the principle of a flywheel; first, by rotating the bar with weights, the screw striker is pulled back until it stops. After this, a replacement stamp is inserted into the slot and the workpiece is placed. Next, quickly spin the bar in the opposite direction and leave it to rotate freely. Finally, the striker hits the stamp shank strongly, due to this, a force sufficient for stamping is developed.
Flashlight
On this device, the rod is also twisted in the longitudinal direction, but it is also additionally bent in the transverse direction. It turns out something similar to a flashlight (basket). Hence the name of the device.
Metal gate: step-by-step instructions
Metal is not as easy to work with as wood, but if you have a welding machine, a minimum set of plumbing tools, fittings and an assistant, you can design an excellent gate. Let's get started:
- Draw a sketch. Make a plan, fix the dimensions based on the available materials.
- Make a frame from a profile pipe: assemble a rectangle from reinforcement or a metal pipe according to the specified dimensions and connect all the parts using a welding machine.
- Do not neglect the safety rules: protect your eyes with a special mask, wear thick, non-flammable clothing, and wear rubber shoes. In rainy weather, work under a canopy.
- Cover the frame with boards or metal sheets. In the first case, use self-tapping screws as fasteners, in the second - a welding machine.
- Prepare the awnings. Mark the mounting points on the frame and support post. When installing, use the same welding. Hang the gate and check that the parts are in working order.
- Screw the handles and install the valve.
Wooden gates with forging elements
Natural wood is a traditional building material. Wooden gates are in no way inferior in appearance to their metal counterparts, and in combination with forged elements they look much more attractive than structures sheathed with steel or profiled sheets. Antique-made products that simply cannot be created from other raw materials deserve special attention.
Fences made from natural wood have a low cost, and with proper surface treatment they will last a very long time. They use hinges, handles, and bolts as decorative forging elements. When using metal frames, the strength of the structure increases significantly, this allows you to combine wood with any forged objects.
Drawing techniques
The method of applying the pattern depends on the artist’s skills, therefore, before choosing a pattern execution technique, you should evaluate your capabilities. There are several ways to apply ornaments:
- Airbrushing is performed using a special device, which includes a can and interchangeable attachments that act as a brush.
- The stencil method is suitable for those who have no drawing experience at all. Its essence is that the required pattern is cut out on thick film or paper, then the stencil is pinned to the surface, and the cut out parts are filled with paint.
- The sketch method involves drawing up a preliminary drawing on paper on a reduced scale, which serves as a model when applying the main design to the gate. This method can be compared to construction, when a builder performs work looking at a design drawing. You can use your favorite photo as a sketch.
Apply the design using different tools depending on the size of the pattern details and the chosen technique. With the stencil method of applying a design, it will be more convenient to use a sponge or roller, and when drawing a sketch you cannot do without brushes.
Airbrush.
Using a stencil.
Sketch.
patterns for iron gates
Forging Everyone! Budget forging
We bring to your attention wrought iron gates and gates for your home and garden. The catalog on our website contains photos of forged gates, wickets and their detailed characteristics. The price of forged gates is distinguished by its affordability due to serial production and well-established technologies, and the quality meets international standards or even exceeds them in many ways. You can purchase any products from our company at the lowest prices thanks to the joint purchasing service. Buying forged gates and wickets at a low price is acceptable for people who value their time and money.
Most owners of estates and cottages, when arranging their territory, try to purchase cheap forged patterns for iron gates in construction stores or companies that deal with patterns for iron gates . This, as everyone understands, is not bad, since you don’t have to wait long and spend a lot on purchasing patterns for iron gates . Dacha owners say patterns on iron gates are the best addition to home design. We are pleased to welcome you to our company's website. We will tell you about patterns for iron gates . patterns on iron gates are very reliable and durable, and so that they last even longer and do not rust or peel, after forging they are necessarily coated with anti-corrosion paint. Patterns on iron gates perform both weather protection and decorative functions. If you need the production of forged products or patterns for iron gates , then you can safely contact us for help at any stage from the start of design to the selection of performers. Our catalog contains a huge number of gate models that you will definitely like. The price of patterns for iron gates is the first thing that upsets the buyer. There is an opinion that they are so expensive that it is very difficult to choose a gate for yourself. But, you can purchase elegant patterns for iron gates inexpensively on our website at an affordable price (from 7,000 rubles). As you can see, you can turn your plot into a luxurious estate at the lowest price!
Information on patterns for iron gates
iron gate
with
patterns
photos You are interested in:
Iron gates
with
patterns
photos. (Photos on this topic are collected here, but relevance is not guaranteed.)
pattern
on
gates
and fences - YouTube June 21, 2012
Metal pattern
- lace at
the gate
.
/ Metal decoration at the …
Jan 14, 2014
Forged wickets and gates
do it yourself: video instructions for
...
Most often, forged wickets and
gates
are made of metal and decorated
with patterns
of
iron
rods and plates.
Carved patterns
on…
Photo gallery of metal gates
(catalog No. 5) |
Forged ...
ORDER FORGED
GATES
WITH AN ORIGINAL
PATTERN
IN OUR FORGE!
gate
options presented here Home |
Index
Forged or welded
Welded and forged fences and gates are made from the same material, but use different technologies. In both cases, the elasticity of the metal is used. But it is used in different ways, in different conditions and processes. During the forging process, a metal blank (a rod is usually used for fences) is heated, brought to a certain temperature, and pressed to give it the desired shape. The variety of shapes is great: heated metal becomes many times more plastic, which makes it possible to forge openwork and twisted elements from it.
Having collected a certain number of forged blanks, they are combined into sections, which are then mounted on support pillars. Due to the fact that the work is carried out with softened metal, it is possible to combine the elements of the fence into a single whole almost without seams. Due to this, the forged fence looks very neat.
Classic forging is a long and expensive process, but the fence turns out to be unique
When creating welded fences, the elasticity of the metal is also used, but in a cold state. Twisted and curved elements are also made from rods - the process is called “cold forging”. To obtain welded fence elements of different shapes, there are special devices that allow you to change the shape of the workpieces without heating. But, in a cold state, the ductility of the metal is less, and there are fewer possible variations.
When creating welded fences, the elements are combined by welding. This causes the presence of welded seams. This - the lower artistic value and the presence of seams - is the main difference between welded and forged fences. Otherwise (functionality, durability) they are the same. What else is the difference? In price and production time. Forged fences and gates require much more time to manufacture and cost more, since the process requires special skills and high qualifications. Welded ones are faster and easier to make, and therefore the price is lower.
Forged-welded fences are not so expensive and look interesting
There is also an intermediate type - forged-welded fences. In them, the elements are made by forging, and in sections they are assembled and fastened to each other by welding. Such fences look no less presentable than forged ones, and are cheaper, since the manufacturing process is less labor-intensive.
