Repair of glass tables, doors and other glass products at home

Repairing a glass table is not an easy procedure. The fact is that, due to its transparency, the glass table shows all the mistakes that you may make while working. For this reason, you must act very carefully. The most popular problem among owners of such a product is getting rid of scratches. In order to avoid this, you need to properly care for the table.

Glass table (option 1) Glass table (option 2) Glass table (option 3) Glass table (option 4) Glass table (option 5) Glass table (option 6)

If you want to remove scratches and scuffs from glass, you can't do without valuable advice. Scratches spoil the appearance of the product, which had a neat appearance before this unpleasant incident.

1. Try toothpaste 2. Try ammonia solution 3. For deeper scratches 4. You can try jewelry polishing paste and pad

How to remove hated defects? First, prepare GOI paste. This special glue is sold in automotive stores. Pasta is sold by number. For glass products we will need the first or second number.

In order to get rid of cracks in glass, you need to grind the paste until it becomes crumbly. At the same time, it must be given homogeneity. Polish out any imperfections. In order to remove them, you need to dip a cotton swab into the crushed paste. You need to polish the scratches carefully, without pressing the stick. The procedure is repeated several times, and its duration is about ten seconds. Once polishing is complete, remove excess paste from the glass.

Repairing a wobbly table

Glue the legs

In order to repair a table leg that is wobbly, you need to understand the fasteners. The legs of the table were glued at the factory with a special glue, which may dry out over time. If the legs are secured with dowels, screws, screws, etc., they can simply be unscrewed and replaced. The legs can be glued if the tabletop is attached to them with adhesive bonds. In order to get to the damaged elements, the table is turned over in disassembled form. The screws are unscrewed from the tabletop itself. If a crack has formed on the leg under the tabletop, it can be glued. Place glue into the crack and cover it with a countertop.

If the glass tabletop is on a wooden frame

Glass table on wooden legs

We completely disassemble the base. We clean the old dowels from the old glue, apply new glue and put it in place. You can secure the loose leg with this tie. Screw the pin into the leg and tighten the tie plate into place with self-tapping screws.

You can strengthen the connections with metal elements. Give preference to the dowel. Insert one end of it into the cleaned hole, and sharpen the other so that it fits smoothly into the connection. Now you need to assemble the product. If you have never assembled it before, watch the video.

Glass table care

Taking care of a glass table

In order for the product to serve you as long as possible, it will require proper care. How to care for a glass table? First you need to figure out how to protect it from damage. If you cleaned the room, the table must be set. This will protect it from dust and possible damage. It is necessary to find a special approach to the glass table - wipe it with special compounds, protect it from exposure to direct sunlight and temperature changes.

If you have small children, a glass table could put their lives at risk. To prevent children from getting hurt or accidentally breaking the product, move the table away from children's games. It is best to install a glass table in places where it will be least exposed to household occupants. Pets are another risk to the existence of glass products. Fluffy fidgets can both break and scratch the table. For this reason, it is better to keep them away from the product. As you can see, if you properly treat a glass table, this piece of furniture can serve you for many years.

If you are tired of the old wooden tabletop, you can replace it with a glass one or make a glass table with your own hands. Many craftsmen are faced with the problem of attaching a new countertop. You will learn how to fix the glass on the table in this article.

Chipboard base

The simplest material for making furniture is, of course, chipboards. Coming up with a design for a glass table with a chipboard base is not at all difficult. There are a large number of options, colors and textures of laminated coating for chipboard.

The chipboard sheet is cut using a circular saw. The cut produces a rough edge that needs to be covered with an edge. If you don't have specialized edge finishing equipment, don't worry. The end tape can be glued using a regular iron.

The connection of chipboard parts is carried out using euroscrews, self-tapping screws, and corners. The most acceptable option is to use euroscrews. For them you need to make holes in the chipboard using a drill. These screws are tightened with a hex wrench. In the places where the screw heads are located, special stickers are installed to mask the joint.

What is a glass table cover?

There are two types of glass top tables:

Many people purchase glass tables with a monolithic top.
There are also transformable tables that can increase the length of the tabletop.

Important! This option is indispensable for a large family. In addition, it is ideal for a home holiday feast.

Such coatings are made from three types of glass:

Tinted. This option attracts more attention from visitors to the home. Using this coating, you can highlight the interior of the room in which the piece of furniture is located.

Important! It will look very original if you add black chairs to a black glass table in the kitchen.

Matte. In this case, the glass takes on a slightly greenish color, as it is natural for such a material.
Glass. In the interior of any room, such a design seems weightless and not as bulky as it actually is, and this adds a certain lightness and airiness to the room.

Design

The table must fit into the interior of the room in which it will be located. If the furniture in your home is in a classic style, then the table legs should be made of solid wood, with carved patterns and curls. To make the tree presentable, you can cover it with stain, imitating expensive wood. If you have even a little experience in creating furniture, then it will not be difficult to make a glass table with your own hands. The photo shows an option that is made of only one glass.

For lovers of high-tech style, a table with metal symmetrical legs is suitable, and the tabletop itself can be in the shape of a circle or square. The Mediterranean style implies simplicity in the interior, so the glass tabletop can be placed on rough wooden legs of the correct shape, painted, for example, white.

Pros and cons of the material

Before you move on to attaching the glass tabletop to the table, you need to understand all the advantages and disadvantages of the material you have chosen.

Let's start with the positive aspects:

Original design. Glass tables make a very good impression and lift the mood of both residents and guests. This table looks especially great in a high-tech style interior.
Resistance to external irritants. Many users are afraid to buy a countertop made of this material for fear that the glass may break. In fact, such a coating can be much stronger than wood.
Moisture resistance and temperature resistance. Tempered glass is not frightened by actively changing environmental conditions.
Easy care. Such tables are very hygienic and easy to care for, including removing coloring and greasy substances, which is a definite plus. For the same reason, ordinary wooden kitchen tables are inferior to glass-topped tables.

Before you attach the glass to the table, think about it, because this surface also has some minor disadvantages:

There are many stains and marks left on the surface. This problem can be solved by purchasing a matte countertop.
Even the smallest dirt is visible. You have to remove all the stains with a liquid designed for cleaning glass.
The coating can be easily scratched.
Creates a lot of noise when paired with kitchen utensils.
High price.

Preparation of material and tools

The tabletop can be cut from transparent, frosted, textured, tinted glass or mirror cloth. Transparent glass visually expands the interior of the room. A colored countertop can be an organic addition to the decor of the room. A dark color will create a “glamorous” style. A kitchen table with black glass, complemented by white chairs, will look impressive.

If you have no experience in making furniture, it is better to make a table with your own hands with a solid tabletop and metal legs. Having mastered the technology of working with such material, in the future you will be able to figure out how to make a table from glass of a more complex type.

To make a high-quality table you will need:

sheet of glass;
metal legs;
suction cups for attaching to the tabletop;
wood glue for metal and glass;
gloves and safety glasses;
metal-glass glue, polishing paste.

Set of tools:

Tools for cutting glass: 1 - square; 2 - corborundum stone; 3 — compass for cutting glass; 4 - pliers; 5, 6, 7 - glass cutters.

diamond or roller glass cutter;
pliers with rubber pads;
metal ruler of suitable length;
grinder (grinder), drill;
grinding discs, felt wheel;
pencil for marking.
file (emery block).

Glass should be purchased tempered, 6-12 mm thick. It must be clean and dry when cutting. On dirty material, the cut may be uneven. Having decided on the location of the homemade piece of furniture, plan its dimensions. Apply the accepted dimensions to the sketch. Mark the mounting locations for the legs.

Return to contents

Share on

Let's move on to the attachment

Now is the time to get down to business. To do this you will have to follow this algorithm of actions:

Make a hole at the ends of each leg.
Attach suction cups to these holes using very strong glue.

Important! The adhesive used to attach the mirror surface will be visible through the transparent glass of the future table. In addition, such a composition takes a very long time to dry, which will be unacceptable for this work, unless, of course, there is an additional fastener on the leg.

When the adhesive has dried, use a felt-tip pen to mark the locations of the furniture legs on the tabletop.
Degrease the marked areas using acetone or gasoline.
Glue the glass tabletop to the legs of the table and wait for it to fully set.
Irradiate until the adhesive completely polymerizes.

Important! It is necessary to take into account that it will not be possible to tear off the tabletop and re-attach the glass, so it is necessary to measure everything perfectly accurately.

The glass top for the kitchen table is glued!

Cutting glass for table top

The process of cutting glass is difficult for a beginner. If you are one, it is better to practice the force of pressing the glass cutter on the material in advance. To do this, you should press it on the scales; the pressure of your hand should be about two kilograms. It is with this force that the workpiece should be cut. You can first practice on scraps of glass.

It is necessary to take into account that when working with a roller glass cutter, the pressure should be greater than when using a diamond tool. We place the sheet of glass on a flat surface, laying a thick cloth on it. You can cut on a large table, a sheet of chipboard or plywood. The glass should fit tightly to the surface.

You can place a wire or rod under the line of the future cut on a transparent material. If you want to make a shaped tabletop, you can give them a cut shape. For figure cutting, you can make a stencil. But without experience, it is better to make the tabletop rectangular.

Glass cutting technology.

To cut a workpiece for a tabletop, you can use a special device made of a wide frame and a locking ruler. Before cutting, it is advisable to moisten the glass cutter wheel in any oil. The cut line can be marked with a pencil or felt-tip pen at two points on the edges of the sheet. Applying a metal ruler to the marks, starting from the edge farthest from you, pull the glass cutter towards you close to the ruler with the required pressure.

When using a diamond glass cutter, the line will be almost invisible. If the cut is not clear enough, you can lightly tap it with the head of a glass cutter or other suitable metal object to deepen the cut line. To break off part of a glass sheet, it is laid on the table, aligning the cut line with the edge of the table. Wearing protective gloves, press the edge of the sheet with a sharp movement.

If the cut is made with areas protruding beyond the line, they are broken off by inserting them into a special recess on the glass cutter or using pliers with rubber pads. To cut a sheet of reinforced glass, a cutting line is drawn along its smooth side using a glass cutter. Then, with a sharp tool, they deepen it to the layer of reinforcing mesh. Turning the sheet over, the cut part is broken off along the line. The exposed wire is cut off or bitten off with pliers.

You may be interested in: How to install a kitchen correctly?

Exploitation

A glass tabletop needs to be handled very carefully. For this reason, it is necessary to follow a number of mandatory rules for caring for the surface:

Such a covering is wiped only with artificial suede or a microfiber cloth - these materials leave a minimal amount of stains.
To clean the coating, household chemicals are used, namely glass and mirror surface cleaners. This should be done approximately 1-2 times a week, as there is a risk of aggressive chemical compounds getting on the food.
You can easily get rid of scratches by sanding the surface with GOI paste, toothpaste or Polarit.
To prevent scratches and chips, place special napkins on the table - they are quite easy to find in stores.

Table top decor

Sometimes one detail is missing to transform the interior, make it rich and stylish. Today it is fashionable to decorate tabletops using glass with frosted patterns, photo printing, single-color or multi-color painting. A solution that will harmoniously fit into a specific interior can be found in the catalog or you can choose a custom design.

Video material

A table is a key element of the interior, and it doesn’t matter whether it’s a dining table or a coffee table. Tables with glass tops look especially interesting, because the interior takes on a completely new look when such an element appears in it. From this article, you learned how to attach glass to a tabletop without glue, so that its remains do not spoil the final impression.

To glue glass to metal at home, you need to act very carefully and know several subtleties of the process, in particular, what exactly to glue. Glass is a delicate material, its properties affect how surfaces adhere to other matter.

When gluing, you need to pay attention not only to the use of methods for good adhesion of the glass surface and metal, but to maintaining the appearance of the product. Taking into account the product and the amount of work, they determine what can be used to glue the glass to the metal.

There are several types of glue for gluing:

UV glue and UV lamp;
Super glue;
special adhesive type B 682-0, Verifix MV 750;
epoxy adhesive;
automobile;
Moment;
transparent silicone sealant.

What to use

First of all, you should decide what exactly you will use to glue these two, at first glance, non-glueable surfaces.

Before you begin, you need to prepare the necessary tools and fasteners.

There are enough options for adhesive compositions:

Two-component epoxy adhesive. Valued for its high insulating properties, strength and electrical conductivity. Most often, this composition has a transparent color and consists of two components that need to be mixed. This glue is highly popular for its availability and ease of use.
Heat resistant silicone. Typically this composition is used to glue glass to the oven. Basic performance qualities are indicated on the packaging, but, as a rule, after hardening, this glue is not afraid of high temperatures, fatty or oily environments. In addition, silicone can withstand low temperatures (down to -60 degrees Celsius).
Moment-crystal. It is difficult to imagine an easier-to-use product for gluing metal and glass. The layer between the materials is elastic and resistant to various types of influences. Often used when gluing parts that will be subject to vibration loads.
Automotive glue. Externally, the composition is very similar to rubber. Excellent for gluing glass and metal, however, due to the fact that this glue is black, it is not used very often.

Important: Whatever you choose, remember that it is important to carefully follow the recommendations on the packaging. Even if you have already “glued glass to metal a hundred times” and “the previous tube was almost the same.” The quality of repair work will depend on compliance with the instructions.

Waterproof, quick-drying mounting adhesive for mirrors and glass structures.

Using UV Glue

Often in the process of renovating an apartment, when a glass product or piece of furniture breaks, a situation arises when you need to know how to glue the metal to the glass. One way to remedy the situation when there is a large volume of work is to use an adhesive that contains a component such as methacrylic urethane resin. In addition, the work requires a special UV lamp, a degreasing compound and an industrial hair dryer.

In order for the parts to be glued to stick better, you need to polish and thoroughly treat the surfaces with a degreasing compound. What to replace it with? For these purposes, you can take regular alcohol. The next step is to heat the parts for gluing at the joining point a few degrees above room temperature.

Apply the adhesive and turn on the lamp for a few minutes. To apply the glue exactly to the right place, you can mark it with a marker. After hardening, the glue will become transparent and invisible at the attachment point. This must be taken into account if you need to glue not transparent glass, but frosted or colored glass.

The method of using UV glue and a lamp is considered expensive; its use is advisable if all components are present or there is a large gluing area.

Table with glass top in eco-style

Recently, rough interior elements have been gaining popularity, which are transferred almost unchanged to our home from the wild. Eco-style is a direction of interior design that involves the use of natural materials or their imitation for the design of furniture, walls, floors, and decorative elements.

Large driftwood or tree roots are an excellent basis for making a glass table with your own hands. This piece of furniture looks very original. The process of processing natural material itself can take a significant amount of time, but this process should not be neglected.

The first step is to remove the bark and flaking rotten elements from the wood. A strong frame should remain. All bends must be sanded. At the point where the glass is attached, you need to cut down the branches so that they form supports for the surface of the glass. At the final stage, you need to treat the wood with several layers of varnish or stain. It is better to fasten glass using suction cups, as other types of fastening will look unsightly.

Bonding parts of kitchen appliances

Sometimes situations arise when you need to repair the oven or microwave door. If you decide to do this at home, the question arises: what glue should I use to glue the metal to the glass?

When choosing a connection agent, you need to pay attention to the following indicators:

high degree of adhesion;
elasticity;
neutrality and exclusion of toxic emissions;
heat resistance.

Specialized stores sell sealants for repairing kitchen appliances or glue with a silicone composition. For these purposes, you can purchase Dow Corning, but you can’t find it everywhere.

According to people who have encountered such a problem, there are other means that are no worse than imported ones, and in some ways better. Some suggest using an organosilicon compound based on rubber. This product does not emit toxic fumes, hardens without additional processing and can withstand temperature changes. It is up to the consumer to decide which product to use.

To glue glass in an oven or hob, clean the joints and dry them. Then apply glue to the metal according to the attached instructions. When repairing an oven, you have to carefully coat the metal joints, removing excess glue immediately, otherwise, after it hardens, it will be possible to remove smudges only with a special means.

Other craftsmen have found other ways to glue metal to glass:

glue HC-1 and HC-2,
glue BK-4,
silicate glue,
sealants for cars.

Auto glass

Car drivers often face the problem of replacing broken glass in their car. Of course, it is better to use the services of workshops, but every car owner should know the principle of replacement.

To glue glass to metal, treat the gluing areas with a pneumatic knife, removing fragments and old glue. Clean and degrease the body at the junction. The glass is treated with some kind of activator and automotive glue is applied.

Gluing glass to metal yourself is not difficult if you use the appropriate types of glue for the job and follow the instructions. You can repair glass tables, ovens and other items at home.

Glass table repair

Home > Finished products > Tables for equipment > Repair of glass tables

mounting plates have come off

Tempered glass table broke

installation of fasteners to glass

Glass furniture has captivated many. You probably won’t find a person whose interior doesn’t have a glass coffee table, a table for radio equipment made of glass, or a glass dining table. But, unfortunately, such products do not last forever, and, like other interior items in the house, sometimes they require repairs. What can happen to this furniture?

Firstly, the most common problem our customers have is glass breaking. Of course, if the glass is tempered, the likelihood of such an incident is minimal, but not all tables are made from tempered glass. What to do? – Don’t be upset, this “trouble” is easy to fix. Do not rush to throw away the fragments immediately; perhaps they still have fasteners necessary for assembling the table, which will later be very difficult to find or replace; also, broken glass can be assembled like a puzzle and brought to us as a template. We will produce you new glass of the desired shape, color and thickness with the necessary technological cutouts.

Secondly, over time it is possible for the fastening elements to peel off from the glass. Such elements are glued to the glass with a special glue under the influence of the rays of a UV lamp. Few people manage to glue metal fasteners to glass on their own at home. Most household adhesives are not capable of providing stable adhesion. Most often, customers simply damage the surface of the glass and fastening element, which subsequently leads to even greater costs when repairing the table. Entrust this work to professionals. Our specialists will properly prepare the surface of the glass and fastening element for the most reliable bonding.

Some tips for those who decide to repair a glass table with us:

If glass breaks, do not throw away the fragments, collect all parts of the structure and bring it to us, this is the only way we can carry out quality repairs.
If the fasteners come off, do not try to glue them yourself. Please also bring us all the elements of the table structure, including the legs and base.
If glass breaks and there is no way to collect the pieces, bring everything that is left from the table. We kindly ask that when ordering glass, be sure to specify what it is for and how it can be attached to the glass. There are situations when it is not possible to make changes to an order. For example, if you ordered tempered glass, and after execution it turned out that the design provided for holes in the glass, it is impossible to drill them into already tempered glass. Or, for example, you ordered frosted glass, and then it turned out that mounting elements need to be glued to the frosted surface - such a connection will be less durable and our specialists do not undertake to give guarantees for such types of work.
If you have a non-standard situation regarding the repair of a glass structure, be sure to contact us, we will try to help you. If necessary, the master will come to your home.

You can seek advice on repairing a glass table by phone: 8-4912-35-01-44 or 8-4912-90-83-24, or at the address: Ryazan, st. Krupskaya, 27, or st. Novoselov, 40a.