Replacing a countertop in the kitchen with your own hands

The kitchen is one of the most visited rooms in the house. Its convenience and appearance are of great importance for creating a cozy atmosphere. Kitchen furniture is constantly subjected to tests: temperature changes, humidity fluctuations, frequent wet cleaning using household chemicals. Over time, there becomes a need for its repair or replacement. One of the most common operations is replacing kitchen countertops. Is it possible to perform this operation on your own? And what points must be taken into account?

Replace or restore?

The countertop is the most eye-catching element in a kitchen set. It carries a considerable functional load: food is constantly prepared on it, heated dishes are placed on the surface, liquids are spilled, and it is scratched with various objects. Because of this, over time it loses its attractiveness.

What is more profitable: restoring an old countertop or installing a new one?

Minor damage such as scratches and chips are fairly easy to repair on all types of countertops except glass. The easiest way to restore work surfaces is made of wood or laminated chipboard. But it should be remembered that in appearance a new part will almost always have an advantage over a restored one. And the new one will last much longer. In case of significant damage, there is only one option - replacement.

Indications for replacing countertops

The countertop is one of the important elements in the kitchen, without which cooking would be very difficult. No matter how careful the housewife is, sooner or later she will have to face the defects that have arisen as a result of her culinary activities. Cutting food, hot dishes, chemical cleaners, all this has a negative effect on the surface. Burnt marks, stains, cut stripes, chips, etc. remain on it. If the damage is minor, you can try to restore the tabletop, but first make sure that the materials from which it is made allow this to be done. When the defects are significant and there is no desire to contemplate such “beauty” in the kitchen, then you need to think about replacing the entire countertop or a separate fragment of it. In addition to the aesthetic issue, replacing a kitchen countertop is carried out for the following reasons:

through a damaged surface, moisture can enter the material, which leads to its swelling;
the entry of food particles into microcracks leads to the development of pathogenic organisms;
regular exposure of the film coating of the countertop to cleaning agents will lead to abrasion, causing the surface to become sticky and dirty;
After renovation, the old countertop no longer harmonized with the new wallpaper or tiles in the kitchen.

Replacing the countertop in the kitchen may be necessary if there are microcracks on the surface.
Any slight deformation of the surface can lead to misalignment, drawers will no longer open, and black spots will form at the joints near the sink. The formation of mold in cracks will cause deterioration in health, especially for people prone to allergies.

Even if there is no serious damage to the kitchen surface, over time its design may simply become boring or its appearance no longer looks as beautiful as it originally did. After replacing the work area, the entire kitchen area can “shine” in a new way.

Why do countertops deteriorate and why change them?

The main reasons for part damage:

Using abrasive or aggressive detergents.
Temperature changes upon contact with heated dishes, hob or gas stove installed nearby.
Moisture penetrating and leaving marks on the surface.
Pressure on the edges and corners of the slab, leading to their delamination or fracture.
Burnout when exposed to direct sunlight.
Mechanical wear and tear from routine kitchen operations.
Incorrect or poor-quality installation.

A countertop that has lost its external beauty or structural integrity will have to be replaced.

How to avoid frequent countertop replacements?

As with any other product, you can extend the service life of the product by following the operating rules:

Carry out wet cleaning with a soft cloth, using non-aggressive, non-abrasive products - for example, dishwashing liquid.
Place hot dishes or heating kitchen appliances on special stands.
Immediately wipe off any moisture that gets on the work surface and reliably protect it from penetrating into the thickness of the material.
Do not perform heavy operations on the edges and corners of the slab.
Be sure to use a cutting board.
Equip the legs of household appliances located on the countertop with soft pads to prevent scratching the surface when moving it.
Protect from direct sunlight with curtains or blinds on kitchen windows.

USEFUL INFORMATION: Faucet filters for water purification: types, principle of operation, selection

Artificial stone countertops

If you want to install a reliable and durable countertop, we recommend paying attention to artificial stone. Among the undeniable positive characteristics are:

manufacturers offer a large number of shades and textures;
durability and reliability; the material is resistant to mechanical damage;
resistance to water, steam and acids;
care does not require much effort;
resistance to elevated temperatures;

Causes of damage to kitchen countertops

There are several factors that affect how long a kitchen countertop will last:

quality of material;
intensity of operation;
quality of work on the manufacture and installation of countertops.

The quality of the material comes first, since if the initial choice fell on cheap, low-quality samples, neither careful handling nor the skill of the craftsman will help extend the life of the surface. We advise you to choose the most durable and wear-resistant material, as well as proven brands. Our company’s specialists are always ready to provide you with detailed advice.

If the countertop is marked “moisture resistant,” this does not mean that you can forget about proper care of the surface. Not even the highest quality countertop can withstand careless use. Clean your countertops regularly and don't neglect the use of cutting boards.

Finally, the work of the master is of fundamental importance. An experienced specialist knows that carefully processed ends and joints of the countertop can protect it from rapid destruction. In addition, when the first signs of damage appear, be it scratches, chips or swollen areas, you should immediately seek the help of qualified furniture craftsmen to avoid the formation of further defects.

Stages of replacing a kitchen countertop

For a high-quality countertop replacement, it is not enough to have materials and tools. The work must be carried out by trained craftsmen, true professionals in their field. When executing orders, we adhere to clear planning, which allows us to take into account all the customer’s wishes and not miss deadlines.

After an oral discussion of the future order (usually over the phone), our measurer comes to you to take measurements and make calculations. If you want to change the color of the countertop or material, the specialist will provide you with up-to-date catalogs.
We conclude a contract for the provision of services and charge an advance payment.
Next comes the stage of manufacturing a tabletop according to an individual sketch. We communicate realistic deadlines to the customer and always adhere to them.
The finished product is transported to the customer's address.
We are dismantling the old countertop.
We install a new countertop in compliance with all technologies. If necessary, we seal the joints and supplement the surface with skirting boards and plugs.
We remove construction waste.
The final stage is acceptance of the order by the client and payment.

If necessary, the master will cut a hole for a sink, household appliances or hob. The steps for replacing a kitchen countertop may vary depending on the features and complexity of the order or the type of material.

When can you install a countertop yourself?

The desire to save money by doing the installation yourself does not always lead to good results. Installing a countertop yourself is not that difficult, but the process requires certain skills and tools. Therefore, self-installation is possible if:

The part is made of soft, easily processed material. For example, wood or laminated chipboard.
The installation technology is completely clear.
There are the necessary tools, consumables and fasteners.
There are certain skills in using tools and assembling furniture.

Having decided to install it yourself, you must clearly assess the risk of damaging the countertop. It may be cheaper and easier to turn to professional furniture assemblers.

Countertop repair

The imperfections of the countertop are not always so global that it needs to be replaced. Sometimes the surface is easier to repair. Repair of each type of canvas is carried out in its own way depending on the characteristics of the material.

Tabletop made of wood or chipboard

The easiest way to restore wooden surfaces. They often suffer due to exposure to moisture or high temperature. At the same time, their height increases or looseness appears.

Repairing a wooden countertop consists of the following steps:

the deformed surface layer is removed;
the problem area is thoroughly dried and sanded;
A thick mass is made from sawdust and glue;
the voids formed are filled with the resulting solution and formed using a spatula;
the canvas is left under pressure for a day;
the finished surface is coated with silicone.

If damage occurs to the laminated chipboard surface without swelling of the surface, then you simply need to treat all joints with a waterproof sealant.

Wooden countertop repair

Stone countertop

It is recommended to entrust repairs to natural stone surfaces to specialists. This is a labor-intensive process that requires special skills. Any mistake can completely ruin the surface. Restoration of an artificial stone surface occurs as follows:

the surface is reinforced;
damaged areas are treated;
then the surface is degreased;
Small scratches and damage are repaired with a glossy solution or repair acrylic.

Stone countertop repair

If the outer parts of the tabletop have peeled off, then restoration occurs in the following stages:

four types of sandpaper, felt and PVA glue are prepared;
the stone surface is ground and polished;
prepare a solution of glue and acrylic plastic;
the resulting composition seals problem areas;
the surface is dried and sanded with sandpaper;
Finally, polishing with felt occurs.

The most effective way to repair a surface is to use a grinder. With its help, the surface will look like new.

Restoration of a stone countertop, video:

Plastic table top

The plastic surface is susceptible to cracks or chips near the edge during use. To repair such a canvas, you need to purchase a special glue for plastic. It is applied with a special gun. To eliminate cracks, you need to grind the plastic into powder and mix it with glue, and then fill the resulting voids with it.

Glass table top

It is impossible to repair a glass surface at home. Small scratches can be removed using special equipment. Therefore, the glass tabletop must be carefully looked after and handled carefully. The countertop is one of the most functional parts of a kitchen set. It should be convenient and comfortable to use. When the surface loses its original appearance, it can be replaced or repaired. Then cooking will be fun again.

When to use the services of professionals

It is better to order installation if:

You are purchasing an expensive part. In this case, the cost of error will be very high.
There is no special tool or skill to use it to perform installation. For example, for cutting a hole in a part made of natural or artificial stone for a sink.
The installation technology is unknown or unclear.
Installation services are already included in the price of the product.

Countertop replacement prices

Service	Unit	Price
Chipboard table top 28-30mm	1 m2	2500 rub.
Postforming tabletop 38-40mm	1 m2	4950 rub.
Plastic coating	1m	RUB 1,350
PVC ABS coating	1m	1,800 rub.
Drank under the sink	1 PC	1,600 rub.
Tabletop made of artificial stone, acrylic, quartz	1m2	15700 rub.

What material should I choose for the tabletop?

To make this part of the kitchen set, different materials are used:

An artificial stone made from a mixture of acrylic and quartz. By painting the entire thickness of the slab, minor damage is less noticeable. A durable and smooth surface is formed, impervious to moisture or temperature changes, easy for everyday care. This option will last a long time, but installation is complicated due to the weight of the part and the complexity of its processing.
Chipboard with laminated surface. Lowest cost option. It tolerates temperature changes well, is resistant to dirt and mechanical damage, and is lightweight. Chipboard countertops are painted in a wide range of shades to imitate a variety of surfaces. They are easy to restore or replace with your own hands. The main disadvantage is that they do not tolerate moisture entering through the unprotected ends of the slab.
A plastic covering fixed on top of an MDF or chipboard board. This surface is easy to keep clean, it is resistant to scratches and abrasions, and is not afraid of water.
A natural stone. Very expensive material. And heavy: not every kitchen set can withstand such a load. The hard, smooth surface is easy to clean, withstands temperature changes well, but can absorb grease and strong odors. Does not withstand shock loads well.
Glass table top. Stylish and hygienic, but it bursts when the temperature changes, cannot be restored and cannot be installed independently.
Solid natural wood. It looks great, but requires constant specific care: such a tabletop must be periodically polished and impregnated with oil. The surface is easy to scratch and does not tolerate excess moisture. Easily restored.

USEFUL INFORMATION: Which wallpaper to choose for the kitchen?

Replacing countertops in the kitchen

Over time, even the most comfortable, high-quality furniture fails. The kitchen set is used in harsh conditions, since food is constantly being prepared and dishes are washed in the kitchen area. Moisture and steam, drops of fat accumulate here, and temperature changes often occur.

, mechanical damage often occurs , after which traces remain. If there is noticeable damage to individual elements of kitchen furniture, you can replace them and not spend money on buying new furniture.

Sometimes it happens that after a kitchen renovation, the design of the room does not match the elements of the furniture and there is a desire to replace:

table top;
apron;
facade.

Most often, natural and artificial stone . They belong to the category of durable materials. In case of minor damage, they can be restored. For the manufacture of countertops, chipboard and cast material began to be used. It is also used to make kitchen aprons, sinks, and window sills. This allows you to create a design in a single style.

Color selection

The color of the countertop you buy should fit into the interior of the kitchen:

Bright colors will tire your eyes when cooking. Such a detail will attract unnecessary attention.
For a room made in a classic style, dark colors are suitable. But on a dark surface, especially a glossy one, any dirt will be clearly visible.
Pastel or beige tones, especially with small pockmarked patterns, are optimal for the kitchen. Damage and minor dirt are not so noticeable on them.
For a high-tech style, a tabletop in white or with a metal surface is suitable.

Dimensions

It is more profitable to order a single countertop that combines all the elements of the kitchen set. You will get a comfortable, flat surface without joints into which moisture, crumbs and other debris can get. The only difficulty that needs to be taken into account is transporting the product and bringing it into the kitchen.

The width of the tabletop should slightly overhang the cabinets in front and behind. This will allow you to safely place pipes and communications behind the kitchen unit. The front canopy will protect the ends of the furniture from moisture and debris from entering from above, and will reduce the risk of getting caught on handles and cabinet doors during active use.

The thicker the plate of the product, the stronger it is. But you should take into account the dimensions of the built-in sink or hob, and the height of the gas stove.

When installing it yourself, it’s better to play it safe and take the dimensions with a small margin: it’s easy to trim the part, but it’s unlikely to be possible to increase it.

Change countertops and backsplash in the kitchen

Replacing a countertop or backsplash in the kitchen is a very simple procedure that takes place with the help of professional staff. The cost of the tabletop is low

, so it can easily be matched to the kitchen and updated. Facades, tables, aprons are those components without which it is difficult to comfortably prepare food or dine. During this period of time, a wide range of kitchen accessories is available on the market.

Choosing a tabletop

The kitchen area is considered the most visited place for any family. This place in the house is subject to changes in temperature and high humidity. In this part of the house, household chemicals are often used to maintain cleanliness and order. The working surface of the kitchen unit is in contact with such products and food products. As a result, some components of the surface of the table or apron are deformed.

Most owners later begin to think about changing the table, facade or apron in the kitchen. This service is considered quite popular. The tabletop is a monolithic plate or one that includes several components, which is mounted on the bedside table. The thickness of the tabletop may vary. This parameter changes based on the tastes and funds of the owner of the kitchen, as well as the selected element of the kitchen set. The thickness does not go beyond 26-40 millimeters.

The size of the table is determined by specialists based on the location of the cabinets. The table includes facing and bases. The appearance and long service life of the table will largely depend on the cladding. The selection of components is not limited in any way. Even a demanding kitchen owner is able to select materials with a certain texture and color scheme. The company is engaged in the installation and change of tables.

The material for the table must be selected taking into account the following parameters:

• resistance to moisture; • resistance to various influences; • fire resistance; • ease of use; • resistance to the influence of an aggressive environment; • beautiful appearance; • combination of style and kitchen design.

Today, people want to change the table and apron in the kitchen space to a more profitable and original option than what was before. We will manufacture all required components to order and carry out high-quality assembly work.

Replacing an apron in the kitchen

The installation of the kitchen update takes place in the previous place, adjusting it to the dimensions of the main structure. After installing the countertop, professionals will connect all water supply devices.

Today, kitchen aprons made of glass are quite common. Often, a company receives an order to replace the apron with the one chosen. There are many of them, from different designs, because of this, anyone can choose a product that is made with the chosen print and style.

Without an apron, preparing food in the kitchen space is quite problematic. When an apron is missing, you can install it or replace an outdated one. Water, oil, and food debris will definitely get on the wall, and the apron prevents dirt from appearing and losing the color of the entire surface.

The main positive aspects of the apron include:

• applying your design; • the surface is very easy to clean, which reduces the time required to care for kitchen surfaces; • the installation technology is quite difficult, but our company’s employees will definitely provide assistance and carry out the installation in a high-quality manner; • the apron is not afraid of elevated temperatures, which is why it can be installed directly near the stove; • saving time and money on wallpapering walls, after only a short application.

Our company works with aprons in the color scheme of the table or with aprons made of stone and wood of any texture.

Production and replacement of apron and table

The company operates in the production of custom kitchens. We can complete work of any difficulty perfectly and in the shortest possible time, so you can completely rely on us.

Workers replace tables and aprons that will last for many years. During this period of time, you can improve your own skills and look at the new catalog of finished products.

It is more difficult for a non-professional to choose the right tool, material, and accessories. You also need to know the features of the material and how to work with it. If something is done incorrectly, then such a mistake will cost a pretty penny and, as a result, replacing the countertop will result in a decent amount.

The company will take into account any desire of the client, will accept edits and correct the drawn blanks in a situation of need in a short period of time. We can change the table or apron most accurately and instantly. You should definitely be convinced of our professionalism and integrity. All that remains is to call the written telephone number and then at the same moment each person will receive a discount.

Return to list

Preparing for replacement

Before starting dismantling:

The water and gas supply is cut off. The electricity goes out.
Hoses and pipes are removed, wires are removed.
The contents of the cabinets are removed and the drawers are removed.
The sink is detached from the countertop and the hob is removed.

Set of necessary tools and materials

To replace you will need:

Fastening elements (included in the package or purchased independently).
Moisture-resistant sealant for countertops made of chipboard.
For a stone countertop - sealing adhesive.
For marking - marker or construction pencil, tape measure, square, pattern.
Electric jigsaw with a set of files.

Drill and screwdriver with necessary drills and bits.
Putty knife.

Replacing the countertop

Carefully, trying not to damage the cabinets, remove the old countertop. Craftsmen advise saving the fasteners and the old stove: they will be useful for various household needs.
Using a building level, level the kitchen cabinets. If necessary, tighten connections. Clean the mounting area from old sealant.
All open ends of the new part are treated with moisture-resistant sealant. It dries quickly, so the operation must be done quickly.
Make careful markings. When using a hacksaw for fitting, a line is drawn on the front side, and if a jigsaw is used, on the inner surface.
You can protect the laminated layer from chipping by gluing a strip of masking tape along the cut line.
Large irregularities are removed using a fine file or sanding paper.
If the countertop is prefabricated, then degrease and treat the joints with sealant. After installation they are sanded. Such a connection will be almost imperceptible.
Secure the plate using fasteners. The cracks and gaps are filled with sealant or sealant.

A melamine film is glued to the end of the chipboard product using an iron. It is better to use a metal baseboard near the stove. It is more resistant to heat and will not peel off.

USEFUL INFORMATION: Kitchen hood without duct - how to choose?

Self-replacement countertop technology

Replacing a countertop in the kitchen with your own hands is not difficult if you have these same hands and the necessary tools. If glass, natural stone or wood is chosen for installation, then it is better to have specialists cut out holes for taps, sinks or hobs. But, if there is no fear of damaging the expensive material, then you can carry out all the manipulations yourself.

Before replacement, it is necessary to disconnect the adjacent communications, dismantle the hob and sink. Make sure that you have all the necessary tools and materials at hand so that you don’t have to run to the store or neighbors while working. For installation you will need:

drill and drill bits corresponding to the selected material;
jigsaw with files;
fine-grained sandpaper;
sanitary sealant;
putty knife;
roulette;
square, pattern;
marker and pencil.

To replace the countertop in the kitchen you will need a drill and bits.
All fasteners are put away in one place. Although they are old, they can always come in handy.

Removing the old countertop

You need to remove your old product carefully, without sudden movements. Firstly, the facade of the bedside tables can be damaged, and secondly, the old tabletop can be useful in the household. The dismantling process is carried out in several stages.

All drawers are removed.
The shelves are cleared of dishes and cutlery.
All fasteners are removed.
The table top is removed.
The sealant is removed from the surfaces and side parts freed from the old table top.

Next, you need to check whether the bedside tables are level. To do this, alternately lay a two-meter level on the front and rear edges of the kitchen row. In case of error, adjustable legs are tightened or some suitable object is placed. The pedestals deviated from each other are secured to each other with screws or clamps.

Installing a new countertop

The new kitchen surface must be adjusted to the dimensions of the old one. To do this, appropriate measurements are taken and the required length is cut using a saw. If a product made of chipboard, steel or glass is selected, the cut areas are covered with metal plates. If it is stone or wood, then silicone sealant is used.

Places are marked on the surface for installing a sink, faucet and everything else that will be mounted on the countertop. To do this, the necessary measurements are taken and projected onto the surface. Holes are cut with a jigsaw either after installing the tabletop or before it. All manipulations must be performed accurately, because... there will be no turning back. At the same stage, holes are made for fasteners.

The prepared countertop is secured to the kitchen unit with screws. The space between the walls is filled with sealant or a special sealing adhesive.

After installing and fixing the countertops, connect all communications and appliances and check them for functionality. In addition to the main element, skirting boards, connecting strips and corners are installed. Replacing kitchen countertop baseboards is done to create a seal between the wall and the edge of the countertop. It is glued to silicone or a special adhesive composition.

As you can see, changing a kitchen countertop is not difficult, so if you wish, you can do all the work yourself and save on calling a professional.

Installation of sink, hob, baseboard

In a countertop made of hard materials, it is not recommended to make a cutout for a sink or hob yourself. This requires special skill and tools.

It is not advisable to use an old slab for marking: the holes in it may increase during use.

A sink or hob is applied to the stove and outlined.
The cutting line is shifted 1.5 cm inside the contour. It’s better to make the hole a little smaller: you can always expand it.
Several holes are drilled to insert the electric jigsaw blade into them.
A hole is cut out using the markings taped with masking tape. It is better to support the piece being cut from below so that the slab does not break off.

The inner edge of the resulting hole and the surface covered by the sink are treated with sealant.

The sink is secured and the hob is connected according to the instructions.

The connection between the tabletop and the wall is covered with a decorative plinth.

A faucet is installed on the sink and a sewerage system is connected.

Types of kitchen countertops

Today there are about ten types of kitchen surfaces. Each has its own disadvantages and advantages. You need to choose the option that suits your specific kitchen. The most common materials for making countertops are:

Steel. A surface made of this material will withstand any load - it is durable, reliable and hygienic. All these qualities are combined with affordable prices. Such a tabletop can only have a straight shape. It is distinguished by a limited selection of decoration elements; patterns and ornaments are mainly used.

You can safely place hot dishes on a metal surface. During use, scratches appear on it, but they can be easily removed by sanding.

The main disadvantage of the surface is that it becomes dull and loses its shine over time. Installing a steel countertop is a labor-intensive process that will require experience and special tools;

Steel table top

Tree. Only hard wood is suitable for the kitchen. The tabletop is created by gluing a slab of wooden planks together. This contributes to the reliability and wear resistance of the fabric. The edges and surface of the tabletop are carefully treated with oil to protect them from aggressive environmental influences.

This environmentally friendly and natural material is ideal for a rustic kitchen.

Lovers of original solutions will like a tabletop made of exotic woods: cork or tropical. A wooden tabletop requires gentle use and care. It is sensitive to external influences and does not tolerate hot kitchen appliances, so it is necessary to use special stands. Due to the properties of the material, the installation is carried out in a floating manner;

Wood table top

Postforming. Many people are interested in the question of what postforming a countertop is . This option is quite common these days and is a surface made of laminated chipboard. Postforming gained its popularity due to its low cost.

To make it, chipboard is laid with plastic on a paper base. The bottom of the table top is sealed with kraft paper, the edges and joints are closed with plastic or rubber plugs. Any design can be applied to the surface, which is then laminated. This makes the surface beautiful and pleasant to the touch.

It is necessary to use such a tabletop just as carefully as a wooden one. During installation, special attention must be paid to thoroughly sealing the canvas. If installed incorrectly, the tabletop will soon swell;

Postforming countertops

A natural stone. This is the best option for a kitchen surface in all respects. It is natural, strong, durable and resistant to all negative influences. The countertop is usually a granite or marble slab several centimeters thick.

Producing such a surface takes a lot of effort and time. Each product requires an individual approach. Due to the painstaking manufacturing process, a stone countertop has a high cost;

Natural stone countertops

Fake diamond. This material consists of mineral filler, coloring pigment and acrylic resin. It competes with natural stone in all respects, especially in price.

Artificial stone is environmentally friendly, easy to use, wear-resistant and pleasant to the touch. Designers are happy to take advantage of its ability to be produced in a variety of colors and shapes.

How to choose a quality stone countertop? Video:

Advice from professionals

Do not purchase used items. Even if they are in good condition, the service life of such a part will be significantly less. And soon it will need to be replaced.
Do not cut holes for sinks in expensive countertops yourself. The risk of making a mistake is too great, and it is almost impossible to correct the mistakes made. It's better to leave it to the professionals.
Be careful when transporting the part. There are frequent cases of damage to the surface or even fracture of the slab during delivery to its destination.

Replacement of kitchen facades and countertops

To restore the attractiveness of the kitchen if the furniture is partially worn out, there is no need to carry out a complete replacement. You can change the built-in housings.

Often fail:

Cabinet under the sink. Subject to increased influence of humidity.
The cabinet is next to the stove. Exposure to high temperatures.

If you need to update your kitchen interior, you can change the countertop and splashback.

Replacement features

When replacing a product, it is necessary that it has the following qualities:

aesthetics;
environmental friendliness;
ease of maintenance;
increased moisture resistance;
resistance to mechanical stress;
resistance to contrasting temperatures.

Installing a kitchen apron

A kitchen apron performs two functions simultaneously – protective and aesthetic. Often exposed to contamination. If you want to update it, instead of an apron in the kitchen you can use panels made of various materials. It can be:

Chipboard. The most affordable material. Easy to process and attach to the wall. However, it is considered the most short-lived option.
Plastic. Functional. Easy to install and easy to maintain. It is inexpensive, which makes the material popular for inexpensive kitchens. Has a short service life compared to tiles.
MDF. It is an environmentally friendly material. Easy to install. It is resistant to high temperatures and moisture. Easy to clean. The price of the material is lower than that of ceramic tiles.
Glass. Has high resistance to humidity. Opens up great possibilities for decoration. The use of photo printing on glass, correctly combined with lighting, can become the highlight of the interior. It has a high cost.
Metal. Sheets that resist corrosion must be used. This material can be washed frequently. They have high strength. They look original. They have a reasonable price.

If you don’t know how to remove an apron in the kitchen, then you can turn to specialists.