How to quickly repair ceilings in an apartment?

There are many ways to repair ceilings, and each one has a different repair technology. It will all depend on what needs to be done and how badly damaged your ceiling is. We will talk to you about all the methods today.

Everyone, even an inexperienced craftsman, is able to repair the ceilings in an apartment with their own hands, even in the most difficult cases. Of course, many have encountered the fact that ceilings usually become unusable thanks to neighbors above, who every now and then forget to turn off the water taps or something like that. After a good flood, repairs will cost you a pretty penny, so first you need to negotiate compensation with the pests or go to court. Yes, if you are compensated for everything, that’s not bad, but repairs still need to be done and done in such a way that the ceilings not only have a decent appearance, but also serve you for a long time.

Ceiling repairs are done for many reasons, not just when your neighbors flooded your home. If the paints have faded and dulled or the whitewash has peeled off, if the entire ceiling lining is swollen and warped, repairs are simply necessary. Otherwise, if you re-paste the wallpaper on the walls and leave the ceilings as they are, they will significantly spoil the appearance of the room.

Helpful information:

• Do-it-yourself country toilet for 7,500 rubles.
• Do-it-yourself water well drilling
• DIY suspended ceiling made of plasterboard
• How to make a wooden floor with your own hands
• Do-it-yourself corrugated roof
• DIY plasterboard ceiling installation

Ceiling repair methods

Ceiling repair work can always be divided into several types: wet and dry, deep and superficial. For light damage to the ceiling, the dry and superficial method is always used. The most labor-intensive will be the deep repair. Yes, there is practically no dirt and dust from it, but in return it requires the highest skill. A deep repair, if you figure it out, is not difficult, but a beginner in this matter will have to sweat. Before starting a deep ceiling repair, it is necessary to remove furniture and carpets; if possible, it is better to cover the floor with film to make it easier to get rid of construction dust after work.

The methods are different, because everything will depend on what you want to see in the final result. We will list some ways to increase the complexity of the work:

• Painting and covering dry ceilings.
• Cleaning for painting or wallpapering if the ceilings are smooth, dry and have no visible streaks.
• Leveling and plastering if the ceiling has stains, streaks and the old plaster has peeled off in many places.
• Preparation for further installation of suspended or suspended ceilings.
• Finishing ceilings after your upstairs neighbors flooded you.
• Repair after your roof leaked and the ceiling was simply damp, if it was on the top floor.

How to remove old paint

In some cases, oil or water-based paints were previously used for minor ceiling repairs. To remove them from the ceiling surface, you will have to work hard. There are two approaches to removing old paint: chemical and mechanical.

Mechanical cleaning involves using a spatula or sandpaper. This creates a large amount of dust, and it takes a lot of time. The chemical method is the use of special reagents; they are sold in any hardware store. After applying the chemical composition to the ceiling surface, it may take about 12 hours for the old paint to soften. The soft loose paint will then be easy to remove.

Any decorations and decorative parts, as well as polystyrene tiles, must be cleaned with a spatula with a metal blade. If a little glue remains on the surface of the ceiling, it must also be thoroughly cleaned. Upon completion of the work, you should have an absolutely clean surface.

If you plan to overhaul the ceilings with your own hands in an apartment where suspended or tension structures were installed, they must be very carefully and carefully dismantled so as not to damage them. If, of course, they are intended to be reused.

Precautionary measures

Gypsum dust, construction dust, cement dust are a kind of abrasive for the skin that promotes the development of bacteria and infection. This dust will also be harmful if it gets into the eyes and respiratory system. If the ceiling was flooded from above and not only with water, but also with sewage, you will have to remove the red stains, and this is done with the help of rather aggressive chemicals that are very toxic and contain volatile compounds.

It is difficult to carry out repair work, since you will be under the ceiling almost all the time, standing on shaky surfaces. At the same time, your arms, back, and legs get tired. Therefore, before you begin, take care of safety precautions and protective equipment.

• A headdress is required.
• Clothing should be made of dense materials.
• The sole should not be slippery.
• Safety glasses, or at least a cap with a visor.
• Gloves and respirator
• Reliable and stable sawhorses, on which you will feel confident when standing.

Photos of ceilings with your own hands

Read here - DIY porch to the house: step-by-step addition of a porch to the house. Porch made of wood, metal, concrete, brick or stone. Design and original ideas + 80 photos!

Necessary tool

Always, before starting work, inspect what tools you have and what you are missing. Yes, I agree that everyone already has some kind of tool, but sometimes you need something and you don’t even know what you need. Therefore, I will list all the necessary tools for the job:

• Rotary hammer - look for less weight, but at least 800 watts of power. The hammer drill requires a concrete chisel.
• Mixing attachment for mixtures.
• Grinder – we are also looking for something lighter, but not less than 600 W. Flap disc or wire brush.
• Abrasive mesh and straight bar.
• Be sure to have a building level.
• Spatulas with flexible and thin blades.
• Trowel, roller and brushes.
• Polyurethane foam and a gun for it.
• Container for mixing gypsum mixture.
• Spray bottle and vacuum cleaner.

It is not necessary to buy bars for abrasive mesh. You can find a piece of regular timber and cut it to the size you need. This block is checked for evenness using a level. To prevent the mesh from moving off the block, you can secure it with several staples or screws.

With a set of such tools, you can repair ceilings of any level of complexity. Of course, this tool is selected for the most complex ceiling work, and according to the degree of their ease, the list of necessary tools will decrease accordingly.

Frame made of metal profiles for plasterboard

Requirements for finishing ceiling bases

Each person chooses the main finishing criteria for himself, but there are several general requirements that the ceiling base and the choice of appropriate materials must meet:

• environmental friendliness of building materials, their safety;
• durability;
• high quality fastenings.

Depending on the type of room, there may be additional requirements for frost resistance, moisture resistance, resistance to the development of pathogenic microorganisms, additional noise insulation and some other parameters. Therefore, before starting to repair the ceiling, you should choose what criteria will be used for finishing and selecting building materials.

Materials for repair and finishing of ceilings

Buy the necessary materials for repairs, such as finishing and starting plaster, paint, putty, primer only from one manufacturer. Why? Yes, because all technological tests of materials are carried out on their own manufactured products and therefore quality will be guaranteed only when all materials are from one manufacturer.

When performing any repair work on the ceiling, you will definitely need to protect the walls and furniture from dirt and dust that will fly in all directions. You can use plastic film for this.

Previously, when leveling ceilings, they used a rowan mesh, stretching it on anchors and laying durable waterproof cement plaster on top. But sooner or later the metal mesh will manifest itself in the form of red spots. Therefore, if you want the repair to last for a long time, then it is better to use a polymer plaster mesh or special ceiling plasters.

If your ceiling is leaking, then you will need a dye such as methylene blue to repair it. Remember that if you add dye to the mixed plaster mixture, your ceiling will come out mottled. You must first dilute the dye in water, and then mix the plaster mixture with this water. Only one batch of plaster mixture should be used on the entire ceiling surface to be repaired. You won't be able to find a second shade exactly the same.

If, after your neighbors flooded you, and the ceiling has become unusable: the plaster, wallpaper, etc. have come off, and you need to re-level the ceiling, then do not use metal beacons for these purposes, as they will appear through the wallpaper or paint as red spots. Strips of plasterboard are best suited for you as beacons. They are perfectly attached using PVA or any other glue, such as Titan. Just use ceiling mixtures to level the ceiling, such as isogypsum, which can be laid on a ceiling up to 20 millimeters thick.

How to stick polystyrene tiles

Compared to wallpaper, the process of covering the ceiling with polystyrene tiles is much faster and easier. You can do the job alone. You will need tiles, acrylic glue, painting thread, a spatula, a construction knife and a mounting gun.

The working method is as follows:

• Calculate the center point of the room by drawing two diagonal lines from the corners of the room. Through this point, draw two lines perpendicular to each other between the walls.
• You should start gluing the tiles from the center of the ceiling. Glue is applied to the tile along the edges in a dotted line and a little in the center, after which it is applied to the ceiling. The angle of the tile must strictly coincide with the lines on the ceiling.
• All other tiles on the ceiling surface are glued in the same way. If the tile does not fit completely at the edges, it is cut to the required size.
• Finishing is done using decorative skirting boards or borders.

In this material, we looked at how to make ceilings in an apartment with your own hands, using several of the simplest methods. We hope the information will be useful to you. As for suspended and tensile structures, they are a separate topic for description.

Work order

A person who has never dealt with repairs or finishing work, but wants to do everything in the house with his own hands, is unlikely to assess the condition of the ceilings and the necessary repair work at first glance. On the one hand, this is not very good, but on the other hand, when a person makes repairs in his house, he has a whole lot of time for everything. It is from this that the entire procedure for ceiling repair work will flow.

• First of all, inspect the ceilings and decide what kind of final finish you will have.
• If you have a flood, be sure to evaluate and document the condition of the ceiling before repairing.
• The room must be completely dried by opening the windows.
• Re-documenting the condition of the ceiling.
• We make repairs according to the chosen finish.

Preliminary inspection of a damaged ceiling

The main goal when inspecting a damaged ceiling is to identify all the defects that need to be corrected. It happens that the ceiling may sag in the middle, then it is necessary to inspect the structure of the beams and identify the cause of the sagging. Until the problem is fixed, there is no point in starting repairs. If you have concrete floors with cracks between them, then they need to be completely cleaned and re-plastered, and in the future you will have to level the ceilings around the entire perimeter. If your neighbors flooded you, then you need to let the ceiling dry completely. Examine the condition of the plaster and, if it has not come off, putty it with pre-treatment with special solutions so that moldy spots do not appear on the ceilings.

Documenting damaged ceilings

Documentation will be, in this case, ordinary photography. This is also necessary for identifying defects. For example, if you take a piece of fiberboard and place it in the garage for several days. With an ordinary glance, you will not be able to determine the condition after you pick it up after some time. And if you take a photo before placing it in the garage and after, and compare the result on a computer, you will see that after the piece has become darker. If you dry it even with an ordinary hairdryer, salt may appear and streaks will appear.

This must be done so that after the completion of repair work on the ceiling, a stain that did not seem to exist does not appear after the repair. There are times when after repairs stains appear that you didn’t even see, the so-called hidden stains. Maybe the old owners painted the ceilings with oil paint before plastering; the oil, which is perfectly absorbed into the concrete floor, is biding its time. Therefore, after your ceiling has been damaged, you need to dry it thoroughly.

How to properly dry ceilings

Craftsmen who work on ceilings dry them with a hair dryer after the surface has been completely cleaned, before the ceilings are covered. But for good household drying, there are other excellent methods that we will talk about now.

1. On trestles around the entire perimeter of the room you need to hang the most ordinary hundred-watt light bulbs at the rate of one light bulb per square meter. This method will not damage your wiring, but will only increase your electricity costs.
2. In the middle of the room, half a kilogram of silica gel per square meter is placed in vapor-permeable bags. You can use the most inexpensive and even painted one.
3. A stool is placed in the middle of the room and scales are installed, on which several bags filled with silica gel are placed. Using a scale, you can easily monitor the level of moisture absorption.
4. The light bulbs on the trestles on the silica gel side need to be covered with something so that the heat from them does not dry out the silica gel, you can use ordinary sheets of fiberboard or sheets of plywood.
5. The room must be completely closed, without drafts or slightly open windows. If, due to poor quality installation of plastic windows, the sashes do not close tightly and there is a slight draft, then you need to adjust your PVC windows.

Liquid wallpaper on the ceiling - a quick guide

Drying the ceiling using this method will take you no more than one day. As soon as you notice that the silica gel has stopped gaining weight on the scales, or the indicators have significantly slowed down in growth, you can finish drying after about two hours, be sure to photograph the final result and compare it with previous photos.

It is also necessary to keep control of the temperature in the room being dried. If it becomes too hot, the lamps are turned off until the temperature drops within 40 or 45 degrees and the lamps can be turned on again.

Coloring

When deciding how to repair a ceiling with your own hands, you turn to painting as a finishing method quite often. This popularity is primarily due to the availability of paints and varnishes on the construction market, as well as the ease of performing the work. Moreover, in some areas, such as kitchens or bathrooms, painting is a practical and convenient option. Mandatory conditions for high-quality ceiling painting are careful preparation and leveling of the surface. Otherwise, all irregularities will be visible.

Most often, water-based paint is used, less often - oil-based paint. Before use, just stir the paint thoroughly and, if necessary, dilute it until the desired thickness and color are obtained. After this, you can finish the ceiling - repair the ceiling by painting. To work, you will need a brush and a paint roller with a long rod. Painting begins from the wall, where a narrow strip is worked with a brush. For the central part of the ceiling, use a roller.

Sometimes an already painted surface needs a do-it-yourself cosmetic repair of the ceiling. In this case, the ceiling is examined for the presence of blisters and peelings of old paint. Defective areas are cleaned with a spatula and then painted again. In this case, a full repair will soon be required. However, if the old paint layer is holding up well, you can simply refresh the appearance of the ceiling by applying a new coat.

Choosing a repair method and type of finishing

After the drying stage, you need to decide how the repair will be carried out and decide what kind of ceilings you would like to see in this room. Inspect the condition of the ceiling very carefully after drying. It happens that you are not heavily flooded, but the plaster can peel off from the ceiling in whole layers.

Check the ceiling for evenness using a rule or level. If the unevenness reaches five millimeters, then you can get away with partial repairs of those places that have defects. If there are differences of more than 15 millimeters, then a professional plasterer is needed who can level them to perfect condition.

To decide on ceiling repairs, you need to clearly understand its types and methods. This is necessary so that when installing, for example, suspended ceilings, you do not plaster or level the concrete floors. It will be of absolutely no use to you.

Whitewashing with lime mortars

This is a cheap, simple and old-fashioned method, which is no longer used anywhere when finishing ceilings. Whitewashing can also be an allergen, and this method will be more suitable for utility rooms.

Finish plaster

I will say that all modern mixtures generate a little dust, so I don’t recommend doing this kind of finishing in a nursery or bedroom. This can be done if the ceilings are painted later. This method is also not expensive, the only thing is that the ceilings for painting must certainly be perfectly smooth. Every defect will be visible on the painted surface. Modern paints can make your ceilings both matte and mirror-like. The main thing is to prepare the surface well for painting.

Artistic ceiling painting

Here, of course, a professional artist is needed. Painted ceilings are not for everyone and there is no need to level the ceiling to perfect condition, since painting is done on plaster. If you decide to apply a layer of acrylic varnish on top, the glare will negate the beauty of the ceiling painting.

Gluing wallpaper to the ceiling

An alternative and cheaper option compared to painting. In almost every third apartment you can find ceilings covered with wallpaper. Cheap, simple, but the ceilings must be leveled before gluing.

Construction of suspended ceilings

There is no need to level concrete floors. The suspended ceilings themselves allow you to realize and come up with many design effects and ideas. In this case, the ceiling space can be used for communications. The only disadvantages of suspended ceilings are that the ceiling level will be lower by 12 - 20 centimeters and their high cost. In the process, it is also possible to make sound insulation.

This type of ceiling work is considered the simplest and will not entail a lot of waste and time. Basically for work you will need:

• Drill for concrete.
• Self-tapping screws with dowels.
• Drywall, maybe even moisture resistant.
• Of course, a screwdriver.
• Gypsum plaster or putty.

If you decide to radically change your ceilings and make, for example, “Armstrong” suspended ceilings, you will need the following materials and tools:

• Mounting foam, dowels, self-tapping screws, anchor pins and bolts;
• Collets for a specific type of suspended ceiling;
• Drills for each type of fastener and chandelier suspension;
• Materials for deep cleaning of your ceiling: silica gel, or copper sulfate.

Stretch ceiling

They also do not require leveling. The only thing that needs to be done is to remove dust. This is done using PVA glue, which is applied to the entire ceiling or can simply be painted. Stretch ceilings usually come in different types: matte, mirrored, colored, painted, photo. They will also take away your height by 5–10 centimeters and you cannot lay communications.

False ceilings

They are made by covering ceilings using lining, plasterboard, MDF and other materials. The cladding is done on a metal or wooden frame, pre-fixed to the ceiling. Very often they are covered with plastic panels. They can be matched to any tone and color.

Drywall is mainly used to level ceilings for further painting or finishing. For example, in the kitchen, it is best to make the lathing from bars or a metal profile. Since in the kitchen there are more fumes and greasy contaminants, which always tend to rise. In other rooms, the sheathing can be made from the same plasterboard. Which must be impregnated with a water-polymer emulsion. The strips are glued to the ceiling using glue and secured with self-tapping screws.

Common finishing technologies

The owners love this particular part, when the gray and dull, but already smooth ceiling begins to become part of the interior. There are a huge number of finishing options to choose from, based on personal taste, financial capabilities and design preferences. We will list the most common ones in descending order, their pros and cons.

Whitewashing a concrete ceiling with water-based paint

A primer and putty are applied to the concrete base, which is previously leveled. It is necessary to prime in one layer, after which has dried, another 1-3 layers of putty are applied alternately. After this, all irregularities are smoothed out with fine abrasive sandpaper, and then a finishing coat of primer is applied. It is important to remove dust and dirt before the last layer. This can be done using a vacuum cleaner or blowing it off with a compressor. Next, you need to prepare the paint according to the manufacturer’s instructions, using a roller or thin brush. Wetting the roller, the paint is applied in a thin layer to the ceiling. It is not enough; after drying, you need to make another one. In this case, the directions must be perpendicular. If the first time the roller passed along the room, then the second time it passed across it. Hard-to-reach places are painted with a brush.

It is important to consider that if you choose coatings with color or decorative glitter, you need to mix enough paint at a time to be enough for several layers. Otherwise, achieving two identical shades will not work.

Whitewashing a gypsum board ceiling with water-based paint

In this case, there will be only a few differences related to the hygroscopicity of the material. To prevent the absorption of moisture and damage to the finishing layer, it is recommended to increase the number of layers of primer, which will repel water, and if additional waterproofing is used, it will be possible to carry out wet cleaning on the ceiling finish.

Stretch ceiling

At first glance, installing a stretch ceiling only seems complicated. In fact, if a person knows the tools and can install the guides smoothly, then there should be no problems. The work consists in the fact that the finishing will be fixed on pre-fixed baguettes along the perimeter of the room. There are several types of materials and fasteners. Therefore, if you know how to work with clips, then it is better to choose the appropriate blade. Finally, a decorative tape is installed to cover the attachment points of the canvas and baguettes. It is necessary to make some efforts to carry out high-quality repairs to the ceiling in an apartment using stretched fabrics with your own hands.

Wallpapering ceilings

Wallpaper on the ceiling is a rational and common occurrence. Modern wallpapers are easy to care for, durable, do not lose their appearance for a long time, and many of them can be washed. When choosing, you should give preference to those that are intended specifically for application to the ceiling. This will help create a more aesthetically pleasing look with minimal seams. And the highest quality and most popular among all wallpapers for the ceiling are non-woven ones. It is more convenient to paste in pairs to avoid inconvenience during the process. Wallpaper is cut into pieces along the length of the room. The glue is applied according to the instructions and type of wallpaper, only on the ceiling or the canvas itself. Then the wallpaper is applied to the surface, and towards the edges, they begin to iron it with a dry cloth to eliminate bubbles.

Ceiling decoration with decorative polystyrene foam tiles

An inexpensive, aesthetic material that will help reliably hide surface defects. It has different textures and decorative patterns, and can be hung on putty, concrete base, GSK and other types of coatings. Mounted using special glue. Acts as a heat insulator.

Other methods of finishing ceilings

The market for modern materials is replete with ceiling finishing options. These include ceramic ceiling tiles, hanging structures, drapery fabric, siding, mosaic paintings, mirrors. Some of them, if you have some skills, you can install yourself, but with others you will have to turn to professionals. What exactly to choose must be decided based on preferences and capabilities. However, you should not purchase too expensive materials because the boring interior will be difficult to update. The coverage will become pitiful.

Types of ceiling repairs and work process

How to sheathe for gluing or painting - this type of work is described above. I will only add that the previously numb ceiling must undergo deep cleaning and drying. It must also be treated with disinfectants. All work is carried out as during a major overhaul.

Surface cleaning of the ceiling

This type of work will be a little more complicated, but cheaper in terms of consumables. It will be more difficult because when doing it, your hands are simply “taken away”. Materials for surface cleaning of the ceiling:

• Bar and abrasive mesh.
• A product for removing wallpaper or paint.
• Gypsum putties for ceilings.
• Primers for gypsum preferably have biocidal properties.
• Polymer finishing plaster.

Installation of slatted ceiling in the bathroom

It usually starts with removing: old wallpaper, plaster and paint. That is, the floor slabs must remain clean. If there are suspended and suspended ceilings, then this is not necessary. Using a block and an abrasive mesh, clean the entire surface and remove dust, using a vacuum cleaner.

After the ceiling is dust-free, inspect it again more carefully; re-clean any depressions in which paint or other coating remains. It is better to seal the depressions in the ceiling with gypsum mixtures using a hard and fairly wide spatula.

Having puttyed it, it is necessary to prime it. We select a primer with deep penetration, which is applied using a fleecy roller. After the primer has completely dried, you can begin painting the ceiling with acrylic or other paints.

Leveling and replastering dry ceilings

If your ceiling is painted, then all the paint can be removed using an abrasive or a special remover. It is necessary to spray generously with water and after a few hours, remove all the plaster using a spatula. It should come off easily and in layers.

As soon as the ceiling is completely dry, beacons are installed on the ceilings along the width of your large trowel and plastering begins. Please pay attention when leveling the ceiling - the plaster mixture should not come off at the time of application. You need to mix the solution in small portions, so you will need an assistant who will constantly mix more and more new portions.

The last layer of plaster is applied very thin. As a result of leveling, there will be small protrusions or lumps on the ceiling. They must be removed using an abrasive mesh and a wooden block.

It is easier to plaster or level ceilings if glass wallpaper is previously glued to them. As a result, you will get a better quality surface on which cracks will not appear.

At the end, as soon as the plaster has dried, we apply a layer of finishing putty of no more than one millimeter. This must be done carefully and immediately achieve a smooth and even surface. If you want to hang vinyl or non-woven wallpaper, they will easily hide small bumps and bumps.

Major ceiling repairs

You will need the following set of materials and tools for serious work, such as repairing ceilings after you have been poured from above, removing black mold from ceilings that occurs due to high humidity, leveling ceilings, and so on.

• “Whiteness” is a chlorinated liquid oxidizing agent.
• Copper sulfate.
• Polyurethane foam.
• Primer, preferably deep penetration on concrete.
• Reinforcing mesh - for sealing joints if you are covering with plasterboard.
• Assembly glue or PVA.
• Starter plaster for ceilings. Keep in mind that plaster made from a sand-cement mixture will not adhere well.
• Plaster beacons.
• Concrete drill and self-tapping screws with dowels.

This type of repair can be done both on individual damaged areas and along the entire perimeter of the ceiling.

The stages of work during a major overhaul are not much different from other types of work. Mandatory drying, replastering, complete cleaning, sealing cracks, and so on. We clean the cracks, this is done using a hammer drill and from the attachments we select a narrower brush, according to the width of the ceiling crack. It happens that the slabs fit very tightly, and there is practically no gap. In this case, we simply treat the gap with a deep penetration primer. We apply a masking bandage and cover the cracks between the tiles with plaster. Then you can plaster.

Also, deep cracks between the slabs can and should be repaired using polyurethane foam. First, dry the crack, then foam it, and only then apply a primer. Remember that the foam may not adhere to the primer and again moisture may seep through the micro cracks. If partial repairs are necessary, then it is advisable to apply the finishing putty of the same brand that was used. Otherwise, the part of the ceiling being repaired will stand out a little.

Repair of painted ceilings after flooding

After you have been flooded, you need to remove the paint from the ceiling, otherwise yellow spots may appear on the new coating. You can degrease and remove microorganisms using bleach. Be careful when doing this work as the chemical is very aggressive. If bleach gets on your skin, rinse the affected area with plenty of water and, if necessary, consult a doctor.

You can disinfect it using a sponge, which is placed in a tray with a chemical. The sponge should protrude from the tray and by pressing the vessel against the ceiling, we disinfect it along the perimeter. As soon as the reaction begins - hissing, or foam starts, we move to a new area. Everything is done in a spiral - starting from the walls and reaching the center of the ceiling. After this treatment, the ceiling must be dried. You can do this using natural methods.

Afterwards, you can treat the surface with copper sulfate using a regular paint roller. Throw away all used materials immediately, as they are toxic and harmful to health.

Ceiling tiles

Polystyrene tiles are a budget-friendly type of finishing that allows you to get a washable ceiling covering, smooth or with a pattern. Ceiling tiles can be either white or colored, usually pastel shades, and their surface is rough or laminated. Due to their moisture resistance, the tiles can be glued in the bathroom and kitchen, as well as on the balcony. The durability of polystyrene tiles is from 2 to 10 years, depending on operating conditions.

Prices for ceiling tiles

ceiling tiles

Foam ceiling tiles

The surface of the rough ceiling for finishing with tiles must be cleaned of old coating and dust. Cracks, defects and small irregularities do not need to be repaired; the tile completely hides them. If the differences are significant, a leveling frame of wooden slats is built under the tiles or plaster is used.

Glue the tiles with special glue - “Moment”, “Titan” - or use liquid nails. When installing and adjusting, the tiles can be easily cut with a knife. The joints of the ceiling and walls are additionally decorated with ceiling plinths to complete the finish. You can also use elements that imitate stucco - they will give the ceiling originality.

Gluing ceiling tiles without seams

Note! Polystyrene is a flammable material; the use of tiles increases the fire hazard of the room. Therefore, when applying stickers, you need to pay special attention to the quality of electrical wiring and lamps.

Scheme for gluing ceiling tiles

Ceiling tile adhesive

Sequence of work when installing ceiling tiles

How to properly glue tiles to the ceiling?

In this article you will find detailed instructions on how to tile the ceiling! Tiling is one of the most popular ways to finish a ceiling. It is economical and provides the room with an excellent appearance. At the same time, gluing tiles is not difficult, and you can cope with the task on your own.