Curtain rods: 50 stylish ideas for your windows

Round windows

Despite the strange geometric shape, a round frame can be decorated with a standard straight cornice. It must be placed 10 cm or more above the highest point of the configuration in order to open the mold. Curtains should not be straight, as this will clash with the round shape, so heavy curtains should be pulled to the edges just below the center of the geometric figure. If possible, the tulle should not cover the entire configuration.

Rice. 2. round window

A straight cornice is simple and easy to use, but the rounded shape is better emphasized by fabric lowered in arches. It will give the impression of a closed eye. This does not require a continuous holder. It is enough to place 2 or more supports on opposite sides of the window configuration. “Thread” curtains fit well in the form of arcs. The support bolts can be further disguised with artificial flowers or other elements.

The most decisive option is curtains along the inner contour. The support is installed in the center of the structure. And from it, pleated curtains are arranged in a circle. The disadvantage of this design is the complexity of installation and the inability to completely open the window from the curtain.

Arched windows

Rice. 3. arch window

The arched structure is a hybrid of rectangular and round shapes. It was especially popular during the Middle Ages, as the composition visually lengthens the facade of the building. The use of horizontal curtains that start above the peak of the glass unit is not advisable. Such curtains look good only at the moment when the window opens and shows part of its true appearance.

A more interesting solution would be straight curtains that start below the round “dome”. Functionally, this composition has shortcomings, but it looks beautiful within the interior. A semicircular curtain holder would be a good solution. It will be either a solid cornice or several dome-shaped bands. Here you can use not only straight curtains, but also an asymmetrical overlap, when the right side begins under the left panel, and clamps hold the fabric at different heights.

Triangular windows

Rice. 4. wide triangular window

The triangular shape of a double-glazed window is very rare due to the complexity of working with such a structure. In terms of decoration, it is best to use two cornices that form an angle flush with the peak of the form. In this case, fabric decor options differ into three types:

• Overlap, when the curtain from one side is moved to the opposite;
• Solid triangular fabric, which is held on special holders. The bottom of such a curtain will be smooth, and the top will follow the curve of the window and cornices;
• Sliding trapezoidal curtains. The main difference from the “cocked hat” is that the matter is not continuous. It's easier to sew. And when used, you can attach it to the sides of the structure, ensuring maximum light flow.

Types of wall cornices

There are many types of curtain rods that can be divided into:

• according to the material of manufacture;
• according to the features of fastening to the surface;
• according to the method of fastening the curtain fabric.

It is important to consider all these signs before purchasing a device.

Material of manufacture

Cornices are made from classic and modern materials:

• tree;
• metal;
• plastic;
• metal-plastic.

From the point of view of durability, wood and metal win, but in any case, the mass of the curtain is not so large that plastic, and especially metal-plastic, cannot withstand it. The choice of material is more a matter of design than practicality:

Wooden products will fit perfectly into the classic interior of a room with a predominance of warm colors from light brown to chocolate.

They can also be chosen for blue shades of design, as the wood color will look good in contrast.

Wooden cornices can be successfully adapted to ceiling plinths, stylizing the room as a classic reception room.

Often, wood wall moldings pair well with traditional white ceilings; You can hang light curtains made of thin fabric or tulle curtains on such a cornice.

The cornice and finials can be made to order, so you can create a unique design in the room.

These curtain rods are well suited for creating rounded curtains in the style of a stage curtain.

Metal products are heavier and require reliable fastening. Such curtain rods fit into a rich, rich interior. Design style - from classic to modern.

Metal curtain rods are often suitable for rooms with a contrasting, dynamic design.

The shape of the tips ranges from peaks and balls to bird heads and other original varieties.

The advantage of plastic is that it often blends very well with the ceiling, giving the impression that the curtain is simply floating in the air.

Often such products are used in the kitchen, where it is important to emphasize the modesty and simplicity of the interior.

They are also often used in children's rooms.

And in bright bedrooms with windows facing south.

Ceiling and wall cornices

The cornice can be attached to the surface of the wall above the window or directly to the ceiling. Each option has its own advantages. For example, if a suspended ceiling is installed, then dismantling part of it to install a cornice is quite problematic, and in this case it is better to install the cornice on the wall above the window.

If you mount the unit on the ceiling, you get the beautiful impression that the curtain is simply falling from above. In this case, you need to make sure that all working mechanisms are carefully hidden.

However, if it is assumed that the cornice itself should serve as a design element. Of course, it is mounted in a visible place (usually on the surface of the wall) in order to make its contribution to the interior of the room.

Features of attaching curtains to the cornice on the wall

According to the features of curtain fastening, the following curtain rods are distinguished:

• strings (the curtain is traditionally attached with clips that are hung on a string);
• round (a stationary round rod is fixed to the bracket, on which the canvas is suspended);
• profile - for roller blinds with a special mechanism that allows you to adjust the desired height.

String curtain rods are well suited for light curtains of short length or modest colors. Most often they are intended for small bedrooms, kitchens or children's rooms.

Round wall curtain rods are an excellent option for the hall, large, heavy-looking curtains that emphasize the originality of the design. premises.

With the correct selection of the tip, a round cornice will ideally decorate a nursery and create a pleasant atmosphere for children and adults.

A system of two rods is often used. This design move works well if the color of the cornice strongly contrasts with the background of the room.

The round cornice goes well with eyelet curtains, the fittings of which are specially designed for this type of fastening.

Profile cornices are designed for different types of curtains. They provide for all kinds of movement of the canvas - sliding, like blinds, rolling, etc. Such devices are a little more complicated, but the differences in installation features are minor.

Profile cornices will successfully fit into any design

They are often made of plastic so that they do not attract attention to themselves. It looks like the curtain is coming straight from the ceiling.

Often an additional box is installed for such cornices. In this case, the convenience of using the curtain is combined with a beautiful design - the box contributes its part to the overall interior of the room.

Sloping roof windows

Rice. 5. skylights on a sloping wall

An attic glass opening located on a sloping wall is a rather rare occurrence, which gives the room a certain charm. The shape of such a window can be any, but building owners often settle on the standard rectangular version. Any type of drapery is suitable for such a product. The main nuance is not which curtains to choose, but how to hang them.

The main condition is the fastenings in the ceiling and always in the lower part of the window. Otherwise, organza will simply hang as an extra “wall” in the room. If possible, it is recommended to use horizontal roller shutters that hide only the glass opening itself and do not extend into the wall space.

How to choose a curtain rod

In order not to make a mistake with the right choice, you need to be confident in the technical and external characteristics of the product. The cornice should fit harmoniously into the overall style direction of the house and not stand out against the background of the windows. It is best to give preference to neutral pastel shades. These include beige, ash, peach, mocha, graphite.

The fittings and shape of the cornice should also be laconic and not pretentious. The use of additional decorative elements will be relevant only for such unusual interior designs as ethnic or baroque. More modern modern, high-tech or Provence do not accept inlays and other details.

It is also worth deciding on the shape of the window, which should be in harmony with the chosen cornice. If you doubt the window parameters, then you should consult with a specialist and, if possible, order an individual creation of a cornice. The type of fastening and material should also depend on the original window, interior design and personal preference.

Bay windows

Rice. 6. bay window

A bay window is a convex structure of a different number of windows, that is, several window openings protrude beyond the walls to which they are attached. Depending on the area of ​​the room, bay windows will be pronounced or almost invisible. A distinctive feature is the location on the entire wall.

Special profiles for holding draperies are suitable here. This profile should be elastic, but strong enough. Curtains are attached at the junction with the walls, and the entire upper part can be emphasized with lambrequins. If the joints between the windows are extensive, then curtains can be hung at each joint, creating the illusion of several separate windows. With small partitions, it is enough to use fabric of a darker color in this area of ​​the window.

When using blinds, pay attention to the wide vertical slats. Japanese-style bamboo curtains will also look good.

Plastic tires and baguette cornices

These cornices are flat, have a width of 6 and 10 cm. They can be one, two or three cavity. They are easy to find and match the width of the windows. On them, curtains are perfectly gathered into small folds. They can be installed both on the wall and on the ceiling.

Baguette cornices allow you to hide and beautifully decorate a plastic tire.

Plastic tires are inexpensive, available, and easy to use. Since they look more utilitarian than decorative, they are hidden in drawstrings or under lambrequins.

Cornices made of high-quality plastic (PVC, polyvinyl chloride) - a modern environmentally friendly material, the most budget option. They are not only wall-mounted, but also ceiling-mounted, and the design of some cornices allows them to be attached to walls and ceilings with equal success. The most popular color of plastic curtain rods is white, but other colors are also available, including wood and metal.

PVC cornices are lightweight, durable, come in both round and profile and, depending on the design, can be combined with any interior styles. Profile models can be bent in different directions, installed in several rows and mounted on non-standard openings and walls, bringing to life the most incredible decorative fantasies.

Plastic tires with a decorative baguette strip are very popular today. They can be purchased as a set, or you can buy a strip separately, for example, when the design of an existing cornice does not really match the interior. Therefore, baguette cornices can be made not only of plastic, but also of aluminum profile, as well as string and even round.

There is a wide selection of baguette planks of various sizes, colors and textures on sale. They can be stylized as antique, painted in different colors, and imitate the texture of different tree species. Choosing a suitable decor for the finished interior will not be difficult even for such rare options for window openings as bay arches.

Corner windows

Rice. 7. corner window

Corner structures, even if the window openings are asymmetrical or have different sizes, are designed in the same style. Such windows are always rectangular, so it is enough to use ordinary floor-length tulle. If possible, the veil should go as a single sheet through all the zigzags of the corner glass unit. On top you can complement everything with lambrequins.

It is necessary to focus attention on the joints themselves, making them the highlight of the frame. In these places, you can use porters collected in the middle. The length of porters can be shorter than tulle. This will create an organic connection between the lambrequins at the top and the corners.

Note. For corner windows, cornices connected at the joints are used. These are not flexible profiles that can be used for bay windows, but they are not separate “sticks” as with cocked hats.

How to choose a cornice according to window size

The width of the curtains and the width of the cornice are usually different numbers, because the exact dimensions of the fabric are selected for roller blinds, while the rest require an increase for drapery. But before deciding on curtains, you need to know how to calculate the length of the cornice.

If the standard size of the cornice does not match your length measurement of the opening, then you can always saw it down.

Select them for curtains as follows.

To the horizontal value of the window opening you need to add 15 cm on each side. This means that in total you will need to add 30-40 centimeters. But there are exceptions that must be taken into account: the ability of the material to drape, and how harmoniously the size of the window fits into the decor

It is necessary to increase to 50-60 cm if it is too small and it is important to visually enlarge it. And if the curtains are not prone to folds, or are heavy, then you need to think about making them convenient to move to the side, allowing light to better penetrate the room. If you have a large window, you can choose a shorter extension length than usual, but it is recommended not to make it shorter than ten cm at each end.

Wall cornices 3 m long must have at least 3 support points: 2 on the sides, one in the middle.

The misconception of beginners is to select the length of the cornice close to the window opening, in which case there will be a gap. And then the curtains do not fulfill their intended purpose: limiting the amount of sunlight inside the room and interior design. After all, it will not have any visual appeal, and there will also be gaps, which they usually try to get rid of.

Standard parameters were derived from the ergonomics of typical rooms, in which windows and walls are almost the same size.

Complex windows

Rice. 8. complex trapezoid window

A complex look is a combination of different variations. Most likely, there will be cocked hats and diamonds combined into one composition. Solid glass is a rhombus or trapezoid. Depending on the general appearance of the complex structure, porters are also selected.

For diamond-shaped glass openings, short curtains must be used. The upper and lower parts are fixed, as for a sloping attic. But additionally, hooks are screwed into the side corners, which will actually push the fabric apart in different directions, while the upper and lower parts will remain closed. Thus, when closed, the material will be disguised as a rectangle, and when open, it will completely repeat the shape of a rhombus.

The trapezoid is more difficult to work with. For individual parts you can use different types of curtains. For example, horizontal roller shutters made of several blocks.

Places for fixing the cornice

The bay window cornice follows the shape of the window, bending smoothly, and can consist of several separate parts.
There are two types of mounting: wall and ceiling. See general tips for choosing curtain rods.

Wall

This type of fastening is suitable for rooms with a high ceiling. The structure is attached to the wall using screws and brackets. There is a large selection of shapes and designs.

The photo shows an example of installation on a wall.

Ceiling

Ceiling mounts are held on the ceiling of the bay window. Using special self-tapping screws, the structure can be installed on concrete and plasterboard ceilings. This system visually increases the space. Suitable for small rooms

The photo on the left is a stretch ceiling. With this installation method, the cornice is attached directly to the ceiling surface. An important point in this case is to make a beam in advance and attach it. And only then stretch the fabric.

Balcony blocks

Rice. 9. balcony block

A balcony block usually means a balcony door and window. Despite the fact that they are in the same plane, and therefore must be masked in the same style, the need to periodically open the door, as well as the discrepancy between the dimensions of the opening, should be taken into account.

It is best to use roller blinds or blinds. This is practical, provided that the product is attached to the window profile and not to the cornice. When using a cornice, it is recommended to use tulle with a slit, which will allow you to open the balcony door unhindered. It is advisable to mark the cut site with a provocative decorative element - a hanging piece of fabric or stripe. The length of the veil can be either the size of the main window or the size of the separate window and door.

If we are talking about glass through which you can see the street, then here you also need to think about the design. Although the entrance part already has a certain “protection from light”, it would not be superfluous to organize another barrier on the balcony itself. Fabric roller blinds will also fit perfectly here, the number of which depends on the individual parts or the own whim of the apartment owner

An element of façade decor is a window frame.

Before you buy window trim, you need to understand what it should be like and which one is suitable specifically for your home.
In this article we will not consider what material the decor is made from, heavy concrete or lightweight foam; this article is devoted exclusively to the choice of the form of window decoration. Window trim BUY!

Ready-made window kit BUY!

Our clients are often faced with the problem of choosing a finish suitable for the facade of their home.

This is a rather complex task, the solution of which requires knowledge of architectural composition. To help with the right choice of foam decor during a personal meeting at production,

We always provide samples of platbands and cornices free of charge . We are also always ready to send samples for you by transport company.

ORDER SAMPLES

However, this is often not enough; questions still remain that can be attributed to the field of architectural composition.

In this article, in an accessible form, we will talk about those options for decorating the window of a private house that are possible in principle.

Let's talk about the correct names of various elements of facade decor,

We will also present options that can be assembled using foam stucco molding from our catalog.

The number of window design options invented by man throughout the history of construction is truly innumerable; at the end of the article, examples of platbands from different countries and in different styles are collected.

Decor and design of plastic and wooden windows outside the house, basic diagrams.

The first type is the design of a window with a molded uniform frame. We “dress” the window around the entire perimeter with a plinth. Although it is worth noting that the term “plinth” does not refer to names that describe window trim, but since nowadays in everyday life it has become synonymous with the word “profile” and the expression “architectural bummer” and the article was not written for students of an architectural institute, we will make this assumption .

The window is decorated according to the same principle as a painting, with a baguette, molded profile, and the same plinth around the entire perimeter.

The impression varies greatly depending on the width and pattern of the profile.

All profiles from our catalog are in a comparison table; to look at the profile in more detail, click on the window you like.

Opening proportions 1.3m X 1.8m

The platband in the form of a frame can be assembled in two ways:

1. The profile is sawn at 45 degrees and assembled into a frame.
2. The profile is cut at 90 degrees and assembled through decorative square elements (panels).

The second type is the same frame, but already U-shaped, created by some architectural bummer, but interrupted at the bottom by the line of the window sill. The profile of the window sill must be combined with the profile of the window casing. The window sill profile itself can be cut at an angle of 90 degrees or have a pattern rotated.

The second option costs a little more, but looks more complete.

Window frames of different thicknesses and different profile patterns produce different impressions, depending on which window sill is chosen for it, wide or narrow.

Ultimately, in order to make the right decision on choosing a polystyrene foam window sill, it is necessary to see and analyze the architectural composition of the facade as a whole. For example, a wide window sill is most likely suitable if the floor height is more than three meters, and a narrow one if the floor height is small.

The third type - we add a decorative element - a keystone, which in this case, as it were, opens the frame itself.

Once upon a time, the keystone was the most important element when laying a window or doorway, since it was the one that “locked” the vault. Most often, such a stone was found on arched windows, lancet or semicircular. Now such a stone is simply a nice element, a decoration for a window opening.

Note that all the window openings in the pictures have the same proportions, but look different; the foam decor completely changes their perception.

The proportions of the keystone, its size relative to the thickness of the casing are very important when shaping the image of the house, since the keystone is an accent in the composition, its central part.

The fourth type is adding consoles under the window sill. Consoles - supports can have a wide variety of appearances, from simple parallelepipeds to the heads of fantasy animals. It all depends on the overall style of the facade.

Fifth type - we combine a U-shaped platband, window sill, keystone and consoles.

Keystone can be used as: a detail in the framing of windows or doors. The example shows on the left sill 120PP1 size 120x53, in the example on the right the window sill is made of 225PK1 size 225x85, platband 125PN size 125x30, on the right platband 150PN3 size 150x90, on the left keystone 230-ZK1 size 230x165, on the right keystone 240-ZK1 240x220, console- bracket K1 size 90x40x90 in both images.

The sixth type - we decorate the opening of a window or door with sandstone. The picture below shows sandriks at one of the most famous palaces in Russia. Note that they are all different; in Baroque this was not considered something wrong. In this article, however, we mainly consider the decoration of a rectangular opening, since it is impossible to briefly cover the immensity, but this example of façade design using three different sandstones side by side deserves attention.

Sandrik is an element that forms the upper part of the opening. Functionally, the sandrik is designed to protect the opening from precipitation, so it was traditionally made in the form of a pediment, but most often it is just a cornice with a rotating pattern, wider than the casing on the sides of the window.

1. Sandrik - triangular pediment
2. Sandrik - broken triangular pediment
3. Sandrik - triangular 3-segment pediment
4. Sandrik onion
5. Sandricus vulgaris
6. Sandrik broken arched pediment
7. Sandrik segmental composite
8. Sandrik wavy pediment
9. Sandrik arched composite pediment
10. Sandrik from fantasy currencies
11. Sandrik with volume with crown
12. Sandrik in Rococo style

There is no popular name for this element like for a cornice - plinth, so if we are finishing a house in a classic style and want a house above the window, as if the roof ends at the facade, then we remember that we want a sandbar above the window.

Original image taken from Everytecture

Despite the fact that there is only one name, the variety of compositional options for this architectural element is simply amazing. The diagrams in the figure just above only partially show the variety of solutions for the Sandrik composition element. Perhaps a separate article should be written about this architectural detail. But with a modern approach to facade decor, even in a classical style, quite minimalist, we will talk about typical combinations of elements and compositions with them.

Sandrik can replace the upper edge of the platband frame, or he can stand above it, as in the picture below.

Sandrik can have a different height, which is determined by the overall composition and design of the facade, and can also be combined with a keystone.

Seventh type - we use a more complex trajectory to frame a rectangular window, the section profile remains the same, but the general framing line does not follow the perimeter of the window opening, but follows some fantasy trajectory.

Eighth type - we use a complex framing line in combination with sandstone, window sill and keystone. In this option, the keystone may be absent, or located according to 2 different principles: to overlap the top of the sandstone or fit into it.

The example shows a window sill 120PP1 with dimensions 120x53, platband 125PN dimensions 125x30 sandrik 260PS1 with various trims, keystone 230-ZK1 with dimensions 230x165, console-bracket K1 with dimensions 90x40x90

The ninth type is incomplete window framing using only sandstone. The “lonely” sandrik looks rather ascetic, but in combination with consoles, it makes a completely different impression.

In this case, the sandrik itself can either adhere to the window opening or be completely or partially detached from it. Sandrik can be a very functional detail, or it can also play a purely decorative role.

Examples of various sandriks over window openings without frames.

The tenth type is an incomplete frame of a window opening using a sandstone and a window sill. In this case, the sandrik and the window sill must match in length.

The example shows a window sill 120PP1 measuring 120 x 53

The eleventh type is an incomplete window frame using a shortened casing. The shortened casing can be simply cut at a 90-degree angle or have a pattern rotated.

A partial window frame is often combined with other elements, such as cantilever brackets or square supports, or is continued with a thinner, simpler profile.

The twelfth type is the design of a window opening with flat pilasters or half-columns with a sandstone and a window sill.

The thirteenth type - we add the “window sill” element to the platband. The window sill panel can be combined with cantilever supports or with pilasters or blades. In fact, such combinations will result in a good dozen subtypes of compositional solutions for a window with a window sill panel or a window sill panel with a pattern.

Functionally, the window sill plate was pulled out to further insulate the window sill space, which on the inside, in the interior, provided a niche for a heating device.

The window sill pattern must match the architectural style of the building. In the simplest version of the classic style, it is a plane with some profile around the perimeter or a truly paneled die. But the matter may not be limited to a simple frame; often the window sill is the most decorated element. Below is a collage of window sills of different styles and patterns.

The fourteenth type - we decorate the window opening with rusticated panels or, in other words, stones.

This type of design is typical for castle architecture, architecture in various classical styles, and is also often used in modern classics.

Rustic stones are not used separately from the window sill and sandstone, although the upper edge of the window can be decorated with rustic stones, but without a window sill, rustic stones are extremely rare. The stones decorating the window opening can be the same width, or wide and narrow stones can alternate, but it is important to “catch” the correct proportions. Most likely, you should invite a designer for such finishing.

Rustic edging that matches the sandstone and consoles in the photo of the facade of a large house.

Fifteenth type – We make an arched window from a rectangular one. You can only slightly round the corners of the rectangular window casing, or you can add a semicircular arch.

Is it right to use windows of different types on the facade of one house?

Yes, it is possible and this can very often be found in the classical architecture of different countries and different periods. For example, a palace in Monaco.

Milan, courtyard in the city center. The windows on the facade are varied; it is interesting that the central place is occupied by simple frames with window sills decorated with circles.

It is interesting that the window sill for the first and third tiers of windows is the interfloor cornice.

A mosaic of all the types of windows presented above and their combinations demonstrates how diverse options for these types can be obtained by playing with the shape and color of window frames.

You can order foam plastic platbands according to your drawings from us at our production facility. In order for us to calculate the cost of moldings, platbands, window sills or other architectural elements according to your drawings, you must send us your projects, drawings or sketches with dimensions by email. We cannot make calculations over the phone or using linear dimensions; we need to see the entire project. A competent project must include a selection of elements with their dimensions and quantities. If there is no sample made by the architect, then different interpretations of the design documentation by different estimators are possible, so the price without sampling can vary greatly from manufacturer to manufacturer.

All frame options that you see below can be purchased on our website. These foam trim kits are sold coated and are suitable for DIY installation on walls made of any material.

Framing options OK-1 from dh-facade.ru

Framing options OK-2 from dh-facade.

Framing options OK-3 from dh-facade.

Framing options OK-4 from dh-facade.

Framing options OK-5 from dh-facade.

Framing options OK-8 from dh-facade.

Framing options OK-9 from dh-facade.

Do not forget that window trims cannot be considered abstractly from other decorative elements, and also without taking into account the materials and colors of the facade. Taken together, all this gives a unique appearance to the building, provided that everything is done professionally and talentedly.

Drapery options for non-standard windows

Rice. 10. Example of a custom window with a beveled edge

For most owners, an unusually shaped double-glazed window will seem like a real hassle. Even ordering such a design is accompanied by a large number of measurements, and production can take a long time. When it comes to drapery, there are even more questions. However, in reality, camouflage methods for double-glazed windows of any shape and size are the same:

• Fabric curtains that are attached to a rod or profile that rise above the ceiling part of the frame;
• Fabric curtains that are attached to supports and hooks in the frame or on the frame of the product;
• Blinds or roller blinds that are attached to the wall and therefore go flush with it;
• Blinds or roller blinds that are attached to the frame itself.

Roller blinds, which are attached to the profile of the structure itself using hooks, are very convenient, as they do not interfere with opening the shutters for ventilation. This type of drapery does not always look appropriate. The decor is matched to the already created interior and renovation, and not vice versa.

The nuances of draping non-standard windows

Rice. 11. example of a non-standard window

Note! Methods of decorating with curtains can be used not only on openings, but also on walls. For example, if the room has a wall with a built-in flame monitor or an expensive painting. Masking it with a curtain in the same style as window curtains will help protect the painting from fading colors. It will look original and appropriate. However, only if the wall hidden by the canvas does not have additional adjacent pieces of furniture or unnecessary accessories.

Designing strange geometric windows often results in curtains having to be made to order. Almost all finished products are designed for familiar square and rectangular designs, so owners of unusual double-glazed windows will have to make efforts not only to choose the style of drapery, but also to practically create this design with their own hands.

How to decorate sloping windows with curtains?

Rice. 12. sloping window

Beveled windows are trapezoid or triangle. Accordingly, the design of the opening is carried out in accordance with these forms. The main difference from the classic cocked hat is that the angle that needs to be beveled is not straight, but obtuse. And it depends on the slope of the ceiling.

It is best to mask such windows with floor-length curtains. They will also hide the heating system under the window sill well. Keep in mind that popular straight curtains are not suitable for this design, since the lower border will differ significantly in length. Which doesn't look good. Also, when designing a beveled window, you must remember that the side that “falls down” must hold the fabric, which means that standard round cornices with ring holders will need to be additionally secured so that the tulle does not constantly stretch.

Curtains must be picked up at the sides. The cut of the curtains starts from the corner, regardless of how much the two sides of the frame differ in length. As a last resort, you can use the standard scheme for hanging curtains on straight curtain rods.

Features of the design of high windows

Rice. 13. tall windows

Tall windows often do without accessories. This is due to their location. Most often, windows of this shape overlook the staircase, where adjustment of natural light is not required. However, the presence of curtains will make a room with front windows more homely and lived-in.

An unpleasant feature of ceiling-mounted structures is the inconvenience of operation. Today is the age of technology. If you cannot open the curtains manually, you should use roller shutters on the control panel, which will open and unfold to the desired parameters using a button.

At home, there is no need to use too heavy and lush decorations for high windows. Instead of curtains, it is better to use light organza without a pattern. The length of the cape depends on the imagination of the home owner. This can be a transparent veil from the ceiling to the floor or a veil that barely reaches the middle of the frame and covers the upper part. Please note that short tulle and lambrequin are different things. The latter should not be used for front windows, as it creates unnecessary attention.

Curtains for small windows

Rice. 14. small window

The difference in size between a tall window and a small window is huge. However, the masking style is not that different. Small windows also do not need to be covered with curtains. This decision is based on the fact that quite a bit of light comes through the opening, and the curtain will further reduce the illumination of the room.

Because of this, it is recommended to use light, airy lace or organza and avoid heavy curtains. The ideal length of drapery is up to the window sill. In this case, as with an attic or diamond shape, it is recommended to secure the panel not only in the upper part, but also at the bottom. It is better to select the holding headset itself with a length slightly greater than the width of the clearance. This visually increases the appearance of the window niche.

Wide window decoration

Rice. 15. wide window

Wide frames need to be visually reduced. This is due to the fact that too much light enters the room through them, and the products themselves often have an unattractive frame. For spacious windows, thick curtains are used that cover not only part of the light niche, but also extend to the side of the wall. Although this trick will make the window even wider, it will help completely hide the frame.

Otherwise, the spacious windows are designed like bay windows. This means that visually it can be divided into several fragments, which will be separated using another type of curtains or curtains. If a wide window also has an irregular shape, it is recommended to use asymmetrical curtain rods and ordinary vertical floor-length curtains. Try to use drapery to bring the non-standard shape closer to a rectangle and square by hiding individual fragments. Remember that you can hide unpleasant corners only from the inside of the room.

Window decoration consisting of two parts

Rice. 16. two-piece window

Windows consisting of two parts look like two separate structures. The division is not vertical, but horizontal. The lintel can be quite wide, but the designers say that even with a gap of more than a meter in height, they still represent a single composition, so curtains of the same type are used.

The peculiarity of this design is that the upper half has a non-standard tricorne or arch shape. And the bottom one is the usual square or rectangle. There shouldn't be any problems with framing the lower half. And the top one is decorated with the same material, but only tulle and lambrequin are used. If desired, the lambrequin can be repeated in the lower part.

Cornices for non-standard windows

Rice. 17. cornice from support points

In some cases, regular straight cornices may be used for non-standard windows. This assumption looks good on cocked hats. In most cases, craftsmen resort to the services of flexible metal or plastic profiles. They can bend to the shape of an arch, and also have joints that can be rotated to a convenient angle. Such curtain rods can be called universal, but sometimes even they cannot take the shape of the frame.

In such cases, you don’t need to use the cornice at all. Instead, nails or hooks are driven in at equal distances around the perimeter of the frame to hold the curtain. This design looks more original and also goes well with round windows, which do not tolerate other types of drapery well.

Cornices-branches

Rice. 18. cornice-branch

Branches instead of the usual narrow cylindrical beams will look original in the room. Especially if it is a children's room or bedroom. But in the office such an accessory will seem strange. The branch is mounted on two supports, like a regular cornice, but the fabric is not held on by rings or adhesive tape; ties are needed here.

Due to its unusual concept, the branch itself is a rather rare guest in a home as a window accessory. But due to the need to use strings, its popularity decreases even more. Although owners often trim curtains on their own, making eyelets for ring holders is faster and easier than making ties. Buying ready-made curtains for a branch is almost impossible.

Despite the difficulties associated with the branch cornice, its unusual appearance attracts a diverse audience. The branch is used instead of a standard straight cornice, that is, it is not suitable for non-standard windows. But it can make even an ordinary square and rectangle unusual.

What does the cornice look like?

The fundamental function of any curtain for curtains is to securely fix the curtain at the required height. The cornice is a special horizontal structure with fasteners. The design usually takes the form of a simple rod. Using fasteners, the rod is fixed to the wall or ceiling. The simplicity of the design makes it durable and easy to assemble/disassemble.

The round cornice consists of a pipe-shaped rod, brackets and decorative ends

What styles can it be used in?

In modern halls, bedrooms, and children's rooms, roller curtains are increasingly being installed instead of standard curtains. In this case, the need for a retainer disappears by itself. However, this is a rather bold, unusual decision. Most people still prefer classic accessories for window decoration.

Without a cornice it is impossible to decorate windows in a classical style room

Modern curtains look attractive in interiors of different styles. They can be used in the classical direction. Forged metal cornices are especially in fashion. They emphasize the nobility and sophistication of the classics. Plastic models are ideally suited to modern trends - minimalism, loft, hi-tech. If the room has a suspended ceiling structure, you can install the cornice hidden. For this purpose, a special niche is being formed. It masks all the details.

In such a niche, the cornice itself will not be visible, so you can use any convenient way to secure the curtains

Types of curtains for decorating non-standard windows

Rice. 19. curtains for non-standard windows

For non-standard windows, you can choose a design among the usual heavy porter, light tulle to the floor. Even blinds with horizontal and vertical slats seem already familiar. But some varieties are rarely used. For example, pleated curtains. Unexpected decorations can be a great combination.

Pleated curtains

Rice. 20. pleated on a round window

Pleated blinds resemble blinds, but unlike them, they have wider possibilities for use on geometric shapes. For example, on a regular rectangular sash, pleated fabric is a finely folded fabric that has a lace in the center of the material. The cord is necessary to adjust the rise of the curtain.

However, in the case of round windows, pleated curtains can fan out from the center of the window configuration. Such a design will be functional and minimalistic, so it will be suitable for the design of an office or kitchen. Also, a pleated fan scan will help in the case of arches. And for tricorns it is better to take a beveled shape.

Pleated curtains are thick enough to block the flow of sunlight. They are used without auxiliary materials. That is, no coverage is required. This is what pleated blinds resemble. Soft fabric is easier to adjust, and there are simply no problems with missing one or more slats.

Kiseya

Rice. 21. muslin on the corner window

Kisey is a waterfall of hanging threads that can be left falling to the floor or decorated independently with weaving. For muslin, there is no need for pot holders, which will gather the fabric along the edges of the configuration. It is enough to weave the threads together into a wide braid. The appearance of the product is very original, so it is perfect for tall or small windows, will harmonize perfectly with a round window, and will also suit other non-standard types.

A significant disadvantage of muslin is its poor functionality. Due to its heterogeneity and fiber division, muslin practically does not retain light, so it is impossible to influence the illumination of the room, although it looks very good as a decorative element.

Standard curtains and curtains

Rice. 22. standard curtains on a round window

Please note that almost all types of non-standard windows can be done with ordinary straight curtains and curtains. A heavy canvas with poor penetrating abilities will hide the unusual geometry of the glass unit, however, for some home owners this is the result that is preferable.

If you want to show off your shape, but you can’t buy special curtains, you can get by with a standard set, but choose the lightest and most transparent curtains that will show through the window contours.

Thanks to such an accessory as a cross holder, even standard vertical curtains can take on an unusual look. For example, if you tie up curtains from nearby windows. Or if you attach tulle asymmetrically to a fragmented glass surface.

Decorative elements for non-standard windows

Rice. 23. example of using a stripe

Decorative elements for curtains are:

• Interceptors are holders that should group and secure the canvas in the center or on the sides of the window. You don't have to use regular ribbon. Here you can choose beads, a garland of large pins, a chain, and so on. At the same time, you can additionally hang a bunch of keys or a pendant of a different shape on the sling itself. This will give more weight to a small element and make it more meaningful. The main thing is that this decor matches the overall composition of the room.
• Hangings on the cornice do not have to look like invisible loops or rings. The shape of the suspenders or rivets will somewhat complicate the procedure of hanging curtains, but the look will be memorable and stylish.
• Additional jewelry ideas in the form of stripes and hanging ribbons. This can be a functional part of the decor, which is responsible for separating zones. Or maybe a rope that controls the closed-openness of the canvas. A lampas is most often a rope or a thick twisted rope, to which you can attach a weight in the form of an anchor or other interesting decorative element.