Six different ways to hide pipes
Heating communications spoil the appearance of the room, they do not fit well into the decor of the room, therefore, if possible, many try to hide or disguise them. This can be done in different ways.
The loft style allows for display of utilities Source pinterest.com
Hidden broach
If you ask a builder or a craftsman specializing in apartment renovations how to cover a pipe in a room beautifully, he will definitely advise you to make a hidden broach. Its implementation becomes justified when a major overhaul is carried out and communications are assembled from scratch using new modern materials.
The groove is cut with a grinder Source sevparitet.ru
To do this, first, horizontal and vertical channels (grooves) are cut out in the wall with a grinder, then the plumber lays pipes directly into them, brings them to the heating devices and completely connects the entire system. The entire wiring remains deep in the wall; it is covered with plaster on top, so the technical filling becomes completely invisible.
When pipes are laid hidden, they are hidden in the wall Source uyut-remont.ru
Note!
Before hiding communications in the wall, the pipes must be covered with insulation. If this is not done in the presence of coolant, condensation will accumulate on the surface of the wiring. It will cause wet spots to appear on an already repaired wall.
Thermal insulation of utilities in front of a hidden screed Source trubservice.ru
This option for masking heating pipes has its pros and cons. When the pipes are completely hidden, the appearance of the room is transformed and becomes more beautiful. Nothing prevents you from placing furniture close to the walls and building an even line with the furniture. But the practice of operating such premises shows that in the event of an accident it will be impossible to eliminate the leak. It will be difficult to discover where it formed. If this happens in an apartment building, there is a risk of flooding the neighbors. This threatens a scandal and large expenses for compensation for damage to other people's property.
The absence of heating pipes streamlines the interior Source www.stroykat.com
The risks of accidents are high even when polypropylene pipes are used to assemble the pipeline. In this case, fittings are used to connect two joints. Over time, they lose their tightness. Therefore, leaks form, which can only be detected using a water sensor. There are cases when plastic pipe joints leak due to poor soldering. In order to eliminate damage, you will have to re-open the grooves and replace the damaged area. And this is, at the very least, another major overhaul.
Water pressure sensor for heating system Source luvateknoloji.com
Floor screed
Sometimes the lower distribution of heating pipes is completely hidden in the floor screed. This technology is no different from the technology of hidden broaching in the wall. Only one thing: to save money, all pipes are laid in one large wide groove. Separate branches then run off from it in the required directions.
Laying the piping system in the floor Source logo-term.ru
This method of disguise is good if the apartment or house has not yet been screeded. Then it will be easier to create a plan indicating the location of the pipes on the floor, lay the pipes according to it, and then pour the screed. After the concrete has dried, the floor will be perfectly level. Experts advise maintaining the communication plan. It will later be useful for repairing the heating system.
The screed completely hides the wiring Source rousset-yves.fr
When the floor in a house or apartment is made of planks, it will be much easier to lay pipes along the bottom and then maintain them. After laying the finishing coating, it is important to leave one or two boards loose where you can quickly gain access to the main technical components of the pipe distribution.
Installation of heating pipes under a plank floor Source teplomir-nsk.ru
On our website you can find contacts of construction companies that offer ] development and installation of engineering systems[/anchor] of any complexity. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.
False wall
Any decoration of heating pipes should not impede access to areas of possible accidents. Therefore, it is worth giving preference to those designs that meet these requirements. One of them is a false wall, erected using metal profiles. You can then cover them with anything: plasterboard, plastic, plywood. The main thing is to leave access in the form of opening hatches to the places where pipes connect with the heating device, to the locations of couplings and tees. Before assembling the box, it is important to inspect the pipeline and perform the following steps.
To disguise risers, it is better to erect a false wall Source otoplenie-gid.ru
- If the heating risers are assembled using metal-plastic pipes connected by dismountable fittings, the latter should be removed and replaced with press fittings.
- If the wiring is old, you will have to completely change it.
- It is advisable to first cover pipes made of copper or steel with any plastic heat insulator.
After covering, the frame will completely cover all technical components Source www.remontnik.ru
Please note! Experts, when talking about how to decorate a heating pipe in a room, do not recommend using the box where polypropylene pipes are used for laying utilities. When heated, they expand; the high temperature of the coolant makes them plastic. In such a situation, before choosing pipe decor, it is necessary to make a preliminary calculation of the thermal expansion of the pipeline. Only an experienced engineer can do this.
The box is closed with plasterboard Source cosmo.actorz.ru
The finished false wall can then be decorated with anything: you can paste wallpaper on it or lay ceramic tiles. It is important to remember that its construction will take away useful space from the room. For small rooms, this decor of heating pipes is not suitable. Here you can use another method.
The box can become part of the overall decor of the apartment Source master-st.pro
This might be interesting!
In the article at the following link, read about the design of a small kitchen with a gas heater.
Lightweight structures made of plasterboard and plastic
An experienced designer knows how to decorate a heating pipe so that the decor does not take up much space in the room and so that it becomes part of the overall interior design. Lightweight plasterboard structures are often used for these purposes.
Pipes disguised as a lamp Source yandex.uz
So, for example, if you need to close a riser in the living room that goes up to the neighbors right in the middle of the wall in the living room, you can assemble a small box around it from metal profiles and then beat it, turning it into a Greek column. An example of such a solution is shown in the photo.
Riser disguised as a column Source homemasters.ru
The lower wiring can be hidden under a wide baseboard. There are special plastic boxes available for this purpose. If the renovation is still being planned, you can develop a special design project and select all the necessary decor for it. And even at the initial stage, it is worth immediately changing the entire wiring, running heating pipes along the wall right above the floor. Secure them with special fasteners, and only then put the finished box on them. This is the simplest pipe decor for today.
The easiest way to hide pipes in a box is Source onlineshop.imperial.bz
If pipes “run along the floor” in a bathroom or kitchen, you can create a structural element that looks like a stair step, and then cover it with ceramic tiles. It will also look interesting.
A structural element similar to a stair step Source samsmogy-remont.ru
One of the panels must be made removable to provide access to communications. It won't be difficult to do this. All the necessary accessories are on sale, which will allow you to realize your idea without any problems.
Ladder step with an open hatch Source stroyfora.ru
Advantages and disadvantages of masking pipes
In the realities of domestic construction and repair, boxes made of plasterboard or plastic have become an alternative to special plastic boxes. They are installed, as a rule, at the repair stage and immediately cover the unsightly appearance of pipelines. The advantages of this method of masking pipelines:
- Organic design - your guests or visitors will not be able to distinguish a decorative structure from a technological channel for laying heating systems.
- Relatively inexpensive cost - the internal area of the room, which is planned for finishing with plasterboard, will not require much more material for organizing decorative steps or thresholds.
Flaws:
- Once you have installed such boxes, you will not be able to inspect and diagnose the condition of the pipeline. Moreover, in cases where a leak occurs or a pipe breaks, it will not be possible to quickly respond to the leak. Elimination will require dismantling of a significant area.
- When installing plinths, there is a risk of damage to pipelines, communications and other engineering systems, since the builder or installer cannot know what is behind the wall.
- Boxes mounted in this way will not allow you to modernize or partially replace the heating or water supply system.
Video description
The video shows how to make a hatch that provides access to important technical components of the heating distribution:
This might be interesting!
In the article at the following link, read about lighting the facade of a private house.
Factory boxes
Another simple way is to decorate heating pipes and radiators using ready-made screens. They are sold in specialized stores. Presented in a wide range of products.
Beautiful ready-made screens for decorating pipes Source lasermade.ru
There are entire sets consisting of a radiator box and a pipe box, made of the same material, in the same color scheme. They attach quite simply. The choice of mounting method depends on the type of screen construction. Each product comes with detailed assembly instructions. Any person who owns a screwdriver can do it.
Screen kit for battery and pipes in the same style Source remrab.ru
The main advantage of installing factory screens is that if an accident occurs, to eliminate its consequences and repair communications, it is enough to remove the screen from the pipes. This takes a few minutes.
Ready-made screen for masking technical components Source 7roomz.ru
There are no serious disadvantages to such products. The laconic design easily fits into any interior. The assortment is so diverse that it will not be difficult to choose something suitable for any one apartment. If the riser is covered with a plasterboard box, it will not give off heat to the room. This does not happen with ready-made screens. And all because the surface of factory products is perforated, this allows air to easily circulate inside the room.
Photo tips on how to hide pipes in the bathroom
Recommendations from the designer
Beautiful, transparent bathroom - stylish design options, placement secrets and rules for combining with the main style (105 photos)
- Washing machine in the bathroom: placement options, connection rules and operating features (100 photos)
Bathroom remodeling options: modern design, options for changing the bathtub and tips on how to do a quick and easy remodel (75 photos + video)
Read here! Gold bathroom design: 120 photos of stylish design options and features of the perfect combination
Please repost
0
Video description
A few more options on how to hide batteries and pipes in the video:
Modern manufacturers use metal, wood, plastic, and MDF boards to make boxes. Buying a plastic screen, experts say, is a bad decision. Due to constant heating, it quickly turns yellow and becomes unattractive. Temperature changes cause the material to crack over time. Purchasing such a box will not cost much, but it will only last a couple of seasons, then you will have to throw it away. Plastic plinth is free of such disadvantages. But it can only be installed if the pipe layout has been specially altered for it.
Plastic skirting board and screen kit Source ultimatebadbackstrategies.com
This might be interesting!
In the article at the following link, read about the design of a modern kitchen.
The easiest way is to buy a metal screen. From a technical point of view, it has no equal: metal is a durable material, a casing made of it will last a very long time. Its front surface is covered with powder paint. It easily withstands high temperatures and does not crack due to temperature changes. If necessary, the metal box can be painted. This is convenient when changing the stylistic concept of the interior. The metal screen is easy to care for. To keep it clean, simply wipe it with a damp cloth.
Metal baseboard, behind which the heating pipe wiring is hidden Source pinterest.ru
Boxes made of wood and MDF are more expensive, but they fit perfectly into classic interiors and interiors decorated in country style. There are no perforations on such products. This does not mean that they will not allow hot air to circulate freely throughout the room. Their design is such that a gap is formed where the screen adjoins the wall, which allows heat from inside to escape out.
Screen for pipes made of MDF Source build-experts.ru
Wooden screens must be purchased complete with screens for radiators. Then the whole structure as a whole will look great. And this is once again proven by the following photo.
The wooden screen hides both heating radiators and pipes at the same time
Such kits are rarely found on the open market. They are usually made to order. If you wish and have special equipment, you can make additional decorations on the largest elements. Modern technologies allow us to implement very interesting projects.
The heating pipes are covered with a narrow grille Source babyblog.ru
Requirements for materials for sealing pipes
The first thing you need to do before you start sealing pipes in the bathroom is to decide on the appropriate material.
When choosing a material for hiding pipes in the bathroom, being guided solely by the aesthetic component of the product is not entirely correct
Criteria to consider when choosing a material:
- Lightness . To ensure that the structure does not clutter up the already limited space, it is necessary to select materials for the fixation of which there is no need to construct heavy frames. You can use ordinary wooden slats or metal profiles.
- Moisture resistance . High humidity in the bathroom is a common occurrence. The materials used in its construction will certainly be affected by it. Therefore, preference should be given to those options that do not absorb moisture and do not deform when it settles on the surface.
- Resistance to chemical reagents. Without the use of household chemicals, keeping the bathroom clean is quite problematic. During general cleaning of the premises, all vertical and horizontal surfaces must be treated. Therefore, the materials used for their cladding must safely withstand direct contact with household cleaning products.
Decorative MDF boards, plastic wall panels, and sheets of moisture-resistant plasterboard are excellent for hiding communications in the bathroom.
Decorative hardboard slabs covered with a layer of melamine laminate and gypsum 3D panels will look interesting when cladding wall structures
Various textures of gypsum 3D panels, popular in recent years, can imitate wood, brick, mosaics and create fancy patterns on the walls.
An important point: regardless of the type of lining material, before closing the pipes, you should make sure they are reliable. By closing a pipeline that has defects, there is a high risk that in the near future the structure will have to be urgently dismantled.
Video description
The video shows how to hide heating pipes in the wall:
Open methods
There is also open decoration of heating pipes. When using it, the pipes are simply painted to match the walls, then they become less noticeable. When choosing such a disguise, it is important to apply the paint to a cold contour. This means that pipes can only be painted in the warm season. Paint applied to a hot circuit will dry quickly and then crack. Correcting such a defect will be very problematic.
Heating pipes painted to match the walls Source www.indog.ru
This might be interesting!
In the article at the following link, read about modern bathroom design.
If you look through the works of experienced designers, you can see other methods of so-called open masking of pipes. Look at the photo. The craftsman wrapped tow around it and stuck artificial green branches into it. He came up with an original tree that fit very well into the interior.
Successful examples of open masking of pipes Source legkovmeste.ru
A few more successful open method decoration options Source yandex.com
Another designer simply glued bird figures cut out of black paper to a white pipe. The result is a pole on which the world sits a flock of birds. In fact, this decor of a heating pipe in a room always looks very impressive. It is memorable, creates a mood that creates a warm atmosphere. Here you can let your imagination float freely and try to implement something new.
Additional design allows you to simply divert attention from the technical layout Source 1001idej.ru
At the same time, the main thing to remember is that in winter there will be coolant flowing inside, which can melt or damage the materials used. Therefore, when making jewelry, you need to use something that can easily withstand such influence.
A skillful composition is a beautiful decorative element Source arrt.spb.ru
It is impossible not to mention the special rings that are installed on pipes without a screen. They do not hide the riser or pipeline, but only add aesthetics to the place where it meets the wall, floor or ceiling. Rings are made of plastic or wood. They look good. Therefore, they are often used for finishing interior decoration.
Decorative rings for heating pipes Source otoplenie-gid.ru
A few more interesting and original options Source stroysvoy-dom.ru
Stained glass windows and furniture cornices
The use of non-standard solutions for styling an apartment and hiding gas, water, and heating communications makes it easy to transform living spaces and dining rooms. For vertical layouts it is recommended to use stained glass. They can be used to decorate living rooms, adult and children's bedrooms. Stained glass will not only cover communications, but will also become a stylish decoration. If you place a backlight behind multi-colored glasses framed by a wooden or similar body, the finished object will become an auxiliary lamp. In the case where communications are located at the top (ceiling placement), a beneficial solution would be to cover them with furniture cornices. They are installed along the side of cabinets, sets on top and fixed under the ceiling. At the same time, access to communications remains simple, and the space around them remains free.
Curly cornices will fit classic sets, but are unlikely to complement models with bright facades or chrome rails.
