Required materials and tools
The key to successful work is the use of exclusively high-quality materials. First of all, you need to purchase special silicone for mirrors and glass at a hardware store.
Silicone for mirrors
Next we will need a composition for degreasing the surface. You can use white alcohol or another universal solvent. And of course, buy a mirror of the right size or order it from a glass workshop.
Tools that will be useful:
- gun for applying silicone;
Silicone gun
tape measure or large ruler;
Roulette
- screwdriver;
Screwdriver rags for applying degreaser;
Rag and degreaser
- weight to press the mirror material against the door.
What is an auxiliary fastener?
Auxiliary fasteners are needed to hold the mirror on a wall or other surface until it is installed and dried. This is especially true for weighty, large products. Fastening can be different, depending on the materials being bonded. Usually double-sided tape or liquid mirror nails are used.
Mounting adhesive can be used to glue any surface, even porous and uneven. You can glue a mirror using liquid nails to drywall, wallpaper, or plywood. To use the composition you will need a gun, which is sold in hardware stores. To apply glue you need to press on the piston.
The glue can be applied in a snake pattern or dotted.
Another option for attaching a mirror to a wall or furniture is to use double-sided tape. But this adhesive tape will not support a heavy product. To implement your plan, you need to evenly place several pieces of tape on the back side of the reflective surface and remove the protective film from them.
Fastening process
Let's get started with the work:
- First of all, it is recommended to prepare the workplace. It is better to place the door on some kind of flooring, so as not to worry about the surface of the floor or table on which the work will be performed.
- On the door you need to draw the correct placement of the mirror using a template. If you glue it unevenly, it will ruin the appearance of the cabinet.
- Let's move on to degreasing the surface: to do this, wet a rag with a special solvent and apply it to both surfaces that will be bonded in the future. Moreover, when working with a mirror, you need to be extremely careful so as not to damage it. To do this, it is recommended to spread some kind of blanket and only place our workpiece on it. And then start treating the back of the glass with a degreasing agent.
- Insert a tube of silicone into the gun, cut off its edge and you can start applying the product to the surface. It is better to do this in a zigzag pattern in increments of no more than 10 cm.
- As soon as silicone has been applied to the back side, the workpiece must be placed on the door according to the drawn marks. To do this, it is recommended to place the edge of the glass in the drawn corner and align the sheet along the side line. If the mirror blank is large, it is better to use the help of a friend.
- The glass is gently pressed against the surface of the door. Care must be taken to ensure that it does not move or warp. All lines along the mark must coincide with the edges of the workpiece.
- The final fixation on the door will occur in a day. During this time, you need to place heavy objects on the surface that will improve the adhesion of the materials. The main thing is that it is a uniform load.
After gluing the mirror, wait a few minutes to check that it is securely attached.
How to glue a mirror to tiles
How to glue a mirror in the bathroom? If we need to place mirror glass on tiles, we will need a lot of glue. Scotch tape will be useless here. We mark the place where we need to glue the mirror. It is necessary to generously coat the back surface so that a “grid” or “letter X” is formed in the middle. Leave about half a cm of the edges dry. When you press the surface, the glue will smear and may come out of the canvas - fastening along the edges in this case may be less effective. We install the canvas in the desired place. You can put something under it for support and press it against the tile. The glue sets in about half an hour. It is important that the glass does not slip at this moment.
You can watch the video in detail:
The glue completely polymerizes within 24 hours. The tiles or tiles are most likely in the bathroom or kitchen, so it may take longer due to increased humidity. At the end of the process, you need to apply sealant along the edges of the canvas. This will prevent mold and mildew from forming in the spaces between the tiles and the mirror.
Is it possible to mix old glue with new? When carrying out work, it is necessary to use one type of glue. Do not mix the remains of the old with the new. Changing the composition may result in deterioration of properties.
Types of mounting a mirror to a door
There are several types of fastening to the cabinet door:
Attach with double-sided tape. This method is one of the easiest and fastest. Because the mirror sheet will be fixed in literally five minutes. And if necessary, you can simply tear the workpiece from the cabinet and attach it to another place;
Correct distribution of adhesive tape when gluing a mirror
- using liquid nails marked “for mirrors” is a reliable option, but after fixing, the mirror surface cannot be separated from the cabinet;
Liquid nails for mirrors using specialized compounds for mirror and glass surfaces, for example, silicone. In this case, it is extremely important to perform all operations accurately, otherwise the work will not be successful. It will not be possible to remove the glass from the door and any mistake will be fatal;
Distribution of silicone for subsequent gluing of the mirror to the door using a mechanical method, when various fasteners are used, for example, metal brackets, through holders or furniture fasteners with decorative overlays.
Mirror on metal brackets
You can stick a compartment to the door of a closet without having any experience in this matter, and with the help of improvised means. A minimum amount of materials that can be purchased at any hardware store and a standard tool are all you need to install and secure. And most importantly, our instructions with a step-by-step description of each stage of work.
Source: bezkovrov.com
Advantages of installing entrance mirror doors
A steel entrance door has become commonplace in modern apartments. It has many advantages, but its main advantage is safety. Currently, manufacturers are generous with offers regarding the manufacture of different options for the door leaf, including its decorative finish, as well as built-in security locking systems. Color solutions also differ in many options, which is confirmed by photos of entrance doors on specialized websites. However, a demanding client always wants something more. Therefore, thanks to market demands, an original design appeared relatively recently - a metal entrance door with a mirror.
A mirror on the front door can visually enlarge the space and add light to the room
Mirrors in the interior have a purely decorative and practical function. Designers use the technique of installing mirrors in a room to visually expand the space, increase the degree of illumination, etc. Installing a mirror sheet on the front door meets the basic requirements for organizing a hallway and carries an additional functional and decorative load. Among the main advantages of installing a mirror on the door to an apartment are the following:
- A visual increase in the space of a small hallway is created, and the higher the size of the installed mirror, the greater the effect can be achieved. In this case, it is ideal to use a full-length mirror.
- You can increase the illumination of a space without increasing the brightness of the lamps.
- The mirror panel on the door can fully replace the traditionally installed mirror in the hallway, while saving useful space.
- Allows you to eliminate the need for mirrored doors in built-in wardrobes.
- Can become a bright decorative accent in the hallway.
- It visually “lightens” the structure, which is easy to see in the photo: the entrance doors “lose” their massiveness and heaviness.
Important! The soundproofing of the entrance door to the apartment does not change with the installation of a mirror.
How to glue a mirror to a cabinet door - a detailed description of the workflow
Gluing mirrors to furniture elements is a simple but responsible process. If you make mistakes and do everything wrong, then over time the mirror will begin to move from its place or even fall and break. In this review, we will figure out how to carry out the work reliably and efficiently; you will learn several methods and be able to choose the one that best suits your situation.
Gluing a mirror to furniture is quite simple
Glue the mirror to the closet
Let's talk about how to glue a mirror to a cabinet. The mirror canvas looks good, it transforms the room and the interior in it. As a rule, the door area does not allow the use of large panels. Mark with a pencil the points where the boundaries of the mirror will be located. This is where we need to attach it. Before gluing, you can degrease the inner surface so that the glue adheres better. Now we apply double-sided tape. We do this around the perimeter of the surface and inside, leaving a small distance. We coat the gaps between the adhesive tape with glue. Next, remove the protective layer of tape and install the panel in the desired place. Gluing the mirror to the cabinet is not enough; you need to hold it until the glue sets. Once you are sure that it holds, you can let go. It is better not to open the door for several hours. The glue should dry. You can glue back the fabric that has fallen off in exactly the same way.
Types of fastening methods
First of all, let's figure out what methods you can use to secure mirrors. All of them have proven their reliability, but the technology for carrying out the work differs and is used for certain situations.
Mounting double-sided tape
The simplest solution that has the following advantages:
- Double-sided tape allows you to glue elements very quickly . It holds mirrors, glass, and other sheet materials equally securely. To understand the technology, you will need a couple of minutes, and the work uses a simple set of devices, which is found in almost every house and apartment;
Scotch tape allows you to attach mirrors to chipboard very securely
- The cost of this option is low , but if quality is important to you, we recommend purchasing materials not from the budget segment, but at least from the middle price segment. When choosing a specific solution, remember that the material must have a soft spacer; ordinary stationery tape will not work, since it is not designed for high loads;
- Buying tape is not difficult. It is sold in hardware stores, as well as in retail outlets that deal in automotive parts. The second option is even preferable, since automotive double-sided tapes are characterized by increased strength and durability;
Steel doors to an apartment with a mirror: design flaws
Entrance iron doors to an apartment must, first of all, fulfill their main function. Therefore, along with decorative properties, it is necessary to jointly consider the practicality of embedding a mirror and the safety of the structure as a whole for all residents.
A door with a mirror will cost more than the same design without it
No matter how attractive the photos of entrance doors with a mirror inside are, the price of such a design, due to the increased labor intensity of its production, will be higher than the cost of its traditional counterparts. The differences are especially noticeable when choosing mirrors with special properties: matte or semi-matte coating, Venetian glass, engraved, etched, etc. The increase in price is also affected by the surface area occupied by the mirror. When an additional mirror element is used in a door design, the load on the hinges increases significantly, and therefore new requirements for fittings arise.
High-quality components are not cheap. The locking devices required to maintain security will be non-standard - so-called invisible locks, which do not have a keyhole to protect the mirror from possible scratches with the key. There are also difficulties regarding the installation of the peephole: you will have to abandon its location in the middle of the front door. Manufacturers can offer photos or diagrams of installation options that are most optimal, but it is possible that the overview will be somewhat limited.
The disadvantages include the difficulty of caring for the mirror unit and the difficulties associated with replacing it. Caring is quite a responsible job. Keeping a front door with a built-in mirror clean is not easy, but having the appropriate cleaning products can solve this problem. To replace the glass, the door is completely dismantled, since its disassembly is possible only in a specialized workshop. Therefore, before installing the structure, evaluate the possibility of its safe operation.
For people with mental or nervous disorders, an entrance door with a mirror installed in it can provoke depressive or pathological conditions. Psychologists advise against such placement of mirrors if there are such residents in the apartment. The health of the household should take precedence over the desire to improve the decor in the hallway.
The mirror on the door needs frequent systematic care
Helpful advice! If you are organizing the interior of a house, adhering to the principles of Feng Shui, then entrance doors with a built-in mirror are ideal for this, because they reflect not the entrance to the home, but the interior environment.
Types of mirror fastenings to cabinet doors
It is not as difficult to attach a mirror to the door or side panels of furniture as it might seem. The main thing is to choose high-quality materials and approach the matter responsibly. The modern market offers several effective fastening methods using:
- ordinary construction tape;
- liquid nails or special compounds;
- metal brackets and through holders.
Experts note that all devices have proven their reliability in practice. Moreover, each of them has its own advantages and disadvantages that must be taken into account. The choice of one method or another should depend on the specific situation and your preferences.
REFERENCE! Regardless of the chosen technology, it is important not to rush, to do everything carefully and without mistakes. In this case, it will be possible to securely fix the mirror, and it will successfully serve for a long time.
Choosing methods and means
There are 2 ways to stick them on furniture:
- Using double-sided tape.
- For silicone.
Experts recommend buying mirror products reinforced with a special protective film on the reverse side. Such a surface, even if it breaks, does not crumble into fragments. The likelihood of injury is minimal.
Important! It is undesirable to use “liquid nails” and other adhesives for gluing that smell similar to “Moment” glue. These formulations contain substances that can damage amalgam.
So, how to attach a mirror to a closet door?
How to glue a mirror to a cabinet door
To complete the task, you must adhere to a certain algorithm. To get started, prepare everything you need. In addition to the mirror itself, fasteners and tools, you may need some available tools:
- pencil, marker or chalk;
- tape measure or ruler;
- composition for degreasing surfaces (any universal solvent);
- rags (clean cloth).
When everything is at hand, proceed to the main task. It is recommended to make a flooring and place the door removed from the cabinet on it. Using a ruler and pencil, draw the lines of the future location of the mirror.
ATTENTION! Correct marking plays a vital role, since after completion of the work, not all methods allow you to correct fastening errors.
The cabinet door and the back of the product should be degreased. To do this, moisten a clean cloth with solvent and simply wipe everything thoroughly. Then the selected fastening material is applied to the door and the mirror is pressed tightly against it. To do everything exactly according to the markings and not accidentally move anything, it is better to call someone for help.
This is how, in general terms, you can glue a mirror to a piece of furniture. Of course, each fastening method has its own nuances, which we will learn about later.
Fastening with mounting tape
This method is becoming more popular among modern furniture makers, which is explained by the significant advantages of using the material:
- the tape is easy to use - with its help absolutely anyone can do the job, and it won’t take much time (you just need to cover the mirror with double-sided tape and lean it against the desired surface);
- availability - mounting tape is sold in any hardware store at a relatively low price;
- ensuring reliable fixation of the product;
- It is possible to separate an incorrectly glued element.
IMPORTANT! This method is contraindicated for massive products - there is a risk that they will fall and break.
Using special compounds or liquid nails
This method is considered more reliable than using mounting tape. A significant advantage is the large range of different materials; this group of fasteners includes:
- silicone;
- special compounds;
- liquid Nails.
The best choice is silicone. Experts do not recommend using liquid nails, as they contain ammonia, which can lead to stains on the mirror surface.
As for the fastening technology, for convenience, the cabinet door is removed and placed in a horizontal position. After this, as described above, markings are applied and the surface is degreased. Next, the selected composition is applied in strips at regular intervals, after which the mirror is carefully applied to the surface. It is advisable to do the work together - one person places the glass, and the other makes sure that nothing moves. Before hanging the door in place, you need to wait until the adhesive has completely dried.
ATTENTION! When using this method, it is extremely important to do the work carefully and without mistakes - when the composition has completely hardened, it will no longer be possible to separate the mirror from the cabinet door or panel.
Mechanical method
In this case, special fasteners are used that are designed for installing mirrors on furniture. There are two main options:
- metal staples;
- through holders.
How to attach a mirror with your own hands
Mounting a mirror without a frame
Attaching the mirror will not be difficult, the main thing is to prepare everything in advance and follow the algorithm of actions:
- The first step is to prepare all the materials for work so that they are at hand. You need a level, a ruler, a marker or pencil, fasteners, tape or glue. Clean, lint-free cloths are useful for firmly attaching the mirror over the entire surface and removing excess glue. If it will be mounted on hardware or “claws,” then a drill and all the necessary tools are prepared in advance.
- After preparing all materials and tools, it is necessary to degrease both surfaces - the mirror and the cabinet. It is best to use alcohol for this. You can start working after both sides have completely dried.
- When installing on the door, holes are made and tabs are attached. Then they bend or open, depending on the model, and a mirror is inserted inside, which is then tightly secured with fasteners. If for some reason it is a little loose, then you can install small rubber pads under the paws, which will not be noticeable when the work is finished.
When all the materials are prepared and the surfaces are degreased and dried, you can proceed:
- The first step is to make markings using a pencil, chalk or marker. It is important to note everything clearly and evenly, otherwise it will not be possible to re-glue the mirror or redo the fasteners.
- If the fasteners are made with hardware or “claws,” then it is best to use diamond drills to drill holes so as not to damage the surface.
- If liquid glue is used, it is applied not to the cabinet, but to the back surface of the mirror. Then they press it tightly to the cabinet door and hold it. So that the composition “sticks” a little.
- When using adhesive tape, the surface of the cabinet is carefully pasted over according to the intended drawing and then the mirror is leaned against it for complete fixation.
The sequence of actions is the same regardless of the type of fastener. If it is possible to remove the cabinet doors, then this should be done to facilitate the fastening process, especially if the main material chosen is a liquid composition - acrylic or nails. You need to hang the door back two days after it has completely dried.
How to choose materials for gluing mirrors
When planning to stick a mirror surface on cabinet doors, focus on the material covered with a special protective film. Moreover, this film must be present on the back side of the product. There is no fear in using such a product - even if over time the surface becomes detached and breaks, it will not shatter into small fragments that are dangerous for household members. And all because the likelihood of injury is minimized by reinforced film.
Experts recommend taking a closer look at 2 materials for gluing mirrors:
- double-sided tape – has adhesive tape on both sides (with its help it is possible to fix small products);
- silicone composition - firmly holds the plane even in extreme heat, allows you to attach large devices.
Some people use liquid nails and Moment glue to glue the mirror surface onto cabinet doors. But remember that the adhesive composition has a noticeable unpleasant odor. Liquid nails, in turn, are saturated with components that are harmful to the almagama.
Choosing methods and means
There are 2 ways to stick them on furniture:
- Using double-sided tape.
- For silicone.
Experts recommend buying mirror products reinforced with a special protective film on the reverse side. Such a surface, even if it breaks, does not crumble into fragments. The likelihood of injury is minimal.
Important! It is undesirable to use “liquid nails” and other adhesives for gluing that smell similar to “Moment” glue. These formulations contain substances that can damage amalgam.
So, how to attach a mirror to a closet door?
Step-by-step instructions for sticking a mirror with tape
If you choose the option of fixing the mirror to the cabinet doors using double-sided tape, only by adhering to a sequential operating algorithm will you be able to achieve the desired result:
- Holding the end of the tape from the reel, pull it and cut the required length to glue part of the surface.
- Carefully holding the tape, apply it to the product, leveling the adhesive material gradually.
- Measure and cut additional pieces of tape and fill the gaps on the back of the mirror plane.
- Set the product aside, placing it on the front side.
- Decide exactly where the mirror will be located. Measure the boundaries with a pencil.
- With the help of a friend, lift the mirror and place it on the tape to the cabinet doors, focusing on the drawing you made.
- You can press the surface firmly by making sure that the device is positioned correctly.
How to reliably glue mirrors to various surfaces
A mirror is an integral element of our home. You can’t do without it in the hallway, bathroom, bedroom. It performs functions in interior design and allows us to look into it when we need it.
A finished mirror, glued into furniture or installed in a frame, is quite easy to place.
But if it needs to be placed directly on the wall without anything, then this is a more difficult task. You can deal with it if you do everything wisely and use high-quality mirror glue. The success of the whole project will depend on what kind of glue you use. Everything is clear with the wall, but how to glue a mirror to the cabinet door? Let's talk about this further.
How to use silicone correctly
Working with silicone requires a preparatory stage and in general the process takes longer. But the service life of the mirror increases by 2 times compared to the previous method. How should I proceed?
- Carefully remove the cabinet door from its hinges and place it on a flat, horizontal surface, be it the floor or a large table.
- Make markings on the door according to the size of the mirror. Mark where exactly it should be located.
- To ensure that the silicone firmly fixes the material, lubricate the surface of the doors with solvent. It will degrease the surface. A piece of textile will help. The fabric material does not leave behind sticky fibers and threads.
- Take a short break from working and wait until the degreaser evaporates.
- Take silicone-based glue; the manufacturer must indicate the purpose on the packaging - it is used in construction. It is better if the glue is colorless. When the extra drops harden, the mistake will not be so noticeable.
- Spread the glue on the back surface of the mirror in an even layer. It is unacceptable for the composition to get on the front side or clothing. The surface is not lubricated in a continuous layer, but in stripes at intervals of equal length.
- Select the longest edge of the mirror surface as a guide. Slowly press the product against the cabinet door. You will need the help of one more person. While one is applying, the other is monitoring the alignment of the markings and mirror outlines.
- The composition dries when the door is in a horizontal position. Wait a few hours and put the sash back on its hinges. If you doubt whether you managed to place the product correctly or not, before the silicone has completely hardened, you can move the surface to the required distance.
How to peel off and remove a glued damaged mirror?
Sometimes troubles happen to a mirror: it gets scratched, cracks, breaks. Then the problem arises: how to peel it off and remove it if damaged?
Usually glued to the door:
- double-sided tape;
- liquid nails;
- silicone;
- or construction adhesive.
The most difficult thing to separate is the fragments that are held on by glue or silicone, since they are tightly fixed.
To avoid breaking the mirror or getting hurt when removing damaged pieces, you need to resort to several tricks.
- First you need to remove the cabinet door itself and place it in a horizontal position. This will greatly simplify the peeling procedure.
- Cover the mirror canvas with solid strips of tape so that when crumbled, fragments do not fly away.
You can peel off a mirror from furniture in 2 ways: using a solvent or a hair dryer. In the first case:
- Find the packaging of the product to which the mirror is glued (silicone, liquid nails or glue). The back may contain information about which solvent can be used to remove the adhesive. If you don’t remember what the element is glued to, and the packaging has long been lost, prepare gasoline, acetone, white spirit or another solvent. Each of them can try to peel off the mirror.
- Place the door on a covered floor or other surface and apply solvent between it and the mirror sheet.
- Wait according to the instructions for the solvent.
- Then begin to carefully separate it from the door so as not to damage it. Use auxiliary items if necessary.
- Once the piece is peeled off, wipe the back of the piece and the surface of the furniture with solvent to completely remove any remaining adhesive.
Advice:
Using a solvent when replacing a mirror requires caution: some types of cabinet coating may remain damaged, and then after peeling off the furniture will have to be restored.
If it is impossible to use a solvent, but you have a hair dryer, you can try another method of peeling off. To do this you will need a hairdryer itself, a rigid ruler or a stick.
- Heat the item to be removed with hot air from a hair dryer. Along with it, the glue that holds the mirror on the door will heat up. Move it carefully. If it becomes mobile, start lifting it with a ruler or stick.
- After detaching, clean the back surface of the mirror sheet and the door of any remaining adhesive.
The use of a hair dryer does not provide a 100% guarantee that the project will be successful, since some connecting substances are very resistant to high temperatures.
How to remove from a wardrobe?
A damaged or simply unnecessary wardrobe mirror can be removed using a metal ruler and a mallet.
- First, prepare a metal ruler, mallet and sandpaper.
- Then sand the ruler to make it sharper.
- Place the sharpened edge of the ruler between the back of the mirror and the wardrobe door.
- Gently, gently tap the end of the ruler with a mallet, moving it further and further under the element until it comes off completely.
With this method, there is a high probability that the mirror will be damaged, so before separating it, cover it with tape, then the fragments will remain in place and will not scatter throughout the room.
Alternative mounting option
Experienced furniture makers consider mounting the surface on decorative hangers made of metal as an alternative and reliable option for attaching a mirror to a cabinet door. How do you work with them?
- Make 4 holes with a diameter of 6 mm each in the mirror plane. You can drill using arrow-shaped drills that work with ceramics.
- Make sure that the suspension bracket is not visible from behind the mirror.
- You will have to damage the surface of the cabinet, and this is the main disadvantage.
Source: delajmebel.ru
How to hang a mirror without drilling into the wall? 3 easy ways
How to hang a mirror? It would seem that the answer is obvious - using screws, hinges and other metal fasteners. But to do this you will have to drill into the wall, which is quite difficult and sometimes impossible. And then glue comes to the rescue
Liquid nails for mirrors
The very idea of gluing a heavy and fragile mirror seems quite risky. Of course, this cannot be done with simple universal glue. There are special mounting mixtures for mirrors, and their range is quite wide. So what should you choose?
Obviously, the glue that can fix the mirror must be strong and durable. It requires good adhesion to smooth surfaces, as well as resistance to deformation, humidity, and temperature changes. And of course, it cannot be so aggressive as to dissolve the amalgam (the reflective layer on the “underside” of the glass).
The first thing that comes to mind is the so-called liquid nails
. We are talking about glue with a special clay filler, which provides adhesion even to porous surfaces. Using this mounting mixture, the mirror can even be glued to a brick wall.
A relatively small mirror can be glued on your own, but if its area exceeds 1 m², it is better to entrust this work to professionals
Of course, the choice is not limited to liquid nails. The market offers us many special installation adhesives
. For example, “Tytan Professional for mirrors” from Selena, “Glue for mirrors 47A” produced by Soudal MirrorFix (Penosil), “Quelyd Mastifix for mirrors” (Bostik), “Mirror” (Krass), “Mounting glue for mirrors” (Poli- R). The average cost is 150-300 rubles. per package with a capacity of about 300 ml.
Adhesives for mirrors
Most mirror adhesives are based on synthetic rubber and resins in an organic solvent. This formula provides the material with high strength, durability, immunity to moisture and, unfortunately, a strong unpleasant odor. There are also acrylic water-soluble adhesives that do not have this drawback. Their disadvantage is that they are “hydrophobic”, which does not allow use in the bathroom or kitchen.
When choosing an adhesive, it is important to carefully read the information on the packaging. It is not advisable to use universal compounds, even those that allow working with glass - there is a risk of damaging the amalgam.
In an effort to reduce the cost of the material, manufacturers often add caustic substances to the formula that can dissolve the reflective layer. If the product is intended specifically for mirrors, there is no need to worry about this.
If you need to glue a relatively small mirror, you can use a car mirror sealant, such as acrylic-based Permatex or DoneDeal two-component silicone compound. Products of this kind are sold in compact, easy-to-use packaging and contain detailed instructions for use.
Technology of working with assembly adhesive
High-tech mounting mixtures allow you to fix the mirror on any surface - concrete, brick, wood, glass or tile. The operating technology is almost the same in all cases.
The gluing of the mirror should be carried out at a temperature of 10 to 30°C. The colder the room, the longer it will take for the glue to harden.
The first thing to start with is thorough cleaning of the surfaces to be bonded from dirt and dust, as well as degreasing with white spirit, acetone or gasoline. A concrete or plastered wall should first be impregnated with “Concrete Contact” type soil to strengthen the material and make it evenly absorbent.
The glue is applied to the back of the mirror in strokes 5–7 mm wide in increments of about 5 cm, 3–4 cm from the edge. Then apply it to the wall, cabinet door or other surface and remove it for 2-5 minutes. During this time, the solvent will evaporate from the mounting composition and the mass will become sticky. Then the mirror is applied again, leveled (the master has a few minutes for this) and left until the mixture completely hardens, which is usually about 24 hours.
Installation with double-sided tape
An alternative to glue can be special double-sided tape.
. In this way, only small mirrors can be mounted - with an area of less than 0.5 m² and a weight of less than 6 kg. The main advantage of this technology is the extreme ease of installation. The tape is cut into pieces of the required length, laid out on the wrong side, the protective film is removed, applied to the wall and pressed tightly.
If for one reason or another the mirror needs to be removed, this can be easily done using fishing line or a thin metal string. It is brought between the mirror and the wall and the tape is cut with sawing movements.
Examples of mirror mounting tape include Unibob from Tesa and Scotch. The cost of this product is 200-500 rubles. depending on the length, which varies from 1.25 to 5 m.
Using mounting tape, the mirror should be applied to the wall evenly and accurately. It will no longer be possible to correct the error, as in the case of glue.
Source: www.zaggo.ru
How to glue two mirrors
Mirrors can be glued together using surfaces and edges. The first option is relevant when the old product cannot be removed, but the interior needs to be updated. The second is if it is necessary to increase the mirror area.
You need to carefully stick one mirror onto another. First, both elements are degreased. Then glue for mirrors is applied (to both products around the perimeter), after which they are pressed against the wall or furniture facade. It is advisable to treat the end gaps with sealant.
If it is necessary to glue mirror surfaces, it is important to select 2 identical parts. How to glue a mirror so that it does not burst in the future - you need to precisely adjust the edges, first clean the sides of dust and dirt, and degrease them. It is necessary to glue carefully so that the glue does not protrude out. You can hang one part first and glue the other to it. Another option is gluing mirrors outside the wall. The structure will be fragile, so it is not advisable to move it.
For fastening (auxiliary) double-sided tape is used. The ideal adhesive compositions are Abro and Titan.
If you choose your adhesive thoughtfully, the reflective surface will remain firmly in place for many years. The range of compositions is large, but thanks to the recommendations you can purchase the most suitable one for a particular case. And if you follow the instructions, there will be no difficulties with fastening.