How to remove blinds for washing without breaking the fasteners

How to remove curtains correctly

Of course, there are no particular difficulties here. Many people think so. When it comes to practical steps, problems arise. To prevent them, you need to foresee everything.

General removal instructions:

1. If the installation of curtains on the windows was carried out by a specialist brought in from outside, then it is better to invite him again to dismantle them. This applies to the installation and removal of expensive large metal and electrically driven structures. Typically, organizations that deal with roller blinds provide a guarantee on installation. Take advantage of the right enshrined in the service contract and invite a specialist to your home.
2. Before removal, it is necessary to refresh your memory of the structure. The drawing included with the curtain at the time of purchase will help with this. If the drawing is lost, you need to contact the manufacturer’s website for help. As a rule, company managers do not refuse such a request from consumers and provide a drawing or diagram for free.
3. Consider the design drawing, understand the methods of fastening the parts and decide on the sequence of actions.
4. Prepare your instrument. In most cases, this will be a stationery knife with a quick-release blade, a screwdriver with a thin flat tip, a screwdriver with a Phillips tip, and tweezers 7–8 cm long. It is not recommended to use a screwdriver to remove curtains. If the mounting screws are rusty, the screwdriver bit may flare the screw head and will have to be drilled out. Prepare a can of rust-fighting liquid. Very often, when installing curtain structures, the fastening screws are embedded in the reinforcing metal profile of the window and can rust if there is high humidity. A multifunctional liquid will help remove such screws.
5. If the curtains were installed with screws, be sure to prepare a gun with a bottle of sanitary white silicone. After removing the structure, all the holes left by the screws must be filled with silicone.
6. Clear the table surface from foreign objects to place the removed curtain , prepare a small plastic container for collecting fasteners and small parts.
7. Place a stepladder next to the window. It will provide additional support for your feet while working.

Further steps for removing curtains of different designs and fasteners from the window will differ.

Repair of mechanism and chain of roller blinds

How to repair roller blinds yourself?

Instructions

More details

Installation of roller blinds on plastic windows

Guide to choosing and installing roller blinds on plastic windows

Instructions

More details

How to remove blinds from a window (detailed instructions for each type)

Before dismantling the blinds, go over them with a vacuum cleaner and a cloth in advance. Otherwise, all the dust that has settled over a long time will rise in a column in your apartment.

Horizontal blinds are popular in residential apartments.

The instructions will help you learn how to remove blinds from windows. Most designs are intuitive and work according to certain algorithms.

Remove vertical blinds

How to disassemble vertical blinds?

Vertical slats are much easier to remove.

During installation, such models are placed on a cornice, which in turn is closed with a plug. This is convenient for fixing the entire structure so that the panels do not fall to the floor during use.

It is necessary to remove the plugs and carefully pull out each element in turn, carefully folding it.

1. Find the plug on the curtain rod and pull it out.
2. Pull the common connecting chain to pull out all the blind units.
3. If possible, open the slats so that they are positioned one after the other and fold when dismantled, like a deck of cards.
4. Having pulled out the chain and weights, remove the slats one by one.
5. If the material of the blinds allows, you can wash them in the washing machine.
6. Otherwise, clean with a brush dipped in blind cleaner or a soap-and-water solution.

Detaching the blinds is not difficult.

Remove the horizontal sashes

If in offices vertical blinds are often used, then at home you can most often find horizontal models. How to remove such blinds from the window to wash? The slats are usually made of metal, which bends easily and forms creases.

This type of blinds is made of plastic.

1. In the area of ​​the top bar, find the fasteners that disconnect the slats from the structure.
2. Using a screwdriver or other handy tool, remove the panels from the metal clips. Pull down slightly and then towards you.
3. If you come across a model with plugs, you must first remove them.
4. The same applies to overhead covers and panels that play a decorative function.
5. Dismantle the entire mechanism.
6. Do not allow the slats to become tangled or twisted.

The plastic loop is lifted slightly and tilted to the side, then pulled out with a sharp movement.

Wooden

Wooden blinds are usually not removed for cleaning. Environmentally friendly wood does not like moisture and requires only dry cleaning. But if you urgently need dismantling, arm yourself with a screwdriver.

If the structure is long, it is better to ask for help, since it will be quite difficult to hold it alone.

1. If the blinds are attached to the wall or ceiling, you will find the fasteners on the topmost bar.
2. Pull the latches towards you or unscrew them using a screwdriver, depending on the model.
3. Stack the planks one on top of the other so that they do not fall apart or get damaged.
4. Clean the slats with a vacuum cleaner, wipe with a dry brush or cloth.

Wooden blinds have many advantages.

Rolled

Rolled structures are convenient with an accessible fastening system using magnets or strips of adhesive tape.

Roller blinds are usually not removed, as they are not recommended to be washed.

1. Unhook the fasteners from each other. If the system is held on by tape, then pick up its edge with a knife or tape.
2. Remove the protective plugs and locate the turning mechanism.
3. Remove the gears and shafts.
4. Remove the roll cassette.

In most cases, rolls are fixed using tape or magnetic strips.

Removing mini curtains

Actions:

1. Remove the two end stops from the chain.
2. Raise the curtain.
3. Remove the chain lock from the window, if there is one.
4. Using a flat-head screwdriver, turn the screws securing the guides from the fishing line counterclockwise, and remove the fishing line from the lower fastener.
5. Open the sash and remove the lower line fastener.
6. If the lower line clamp is screwed onto a self-tapping screw, remove the clamp cap, unscrew the screw and remove the clamp.
7. If the curtain brackets are attached to the window through tape platforms, pull the left bracket to the left and remove the curtain with the left bracket from the window. Pull the right bracket to the right from the right tape platform. Using a knife blade, trim the adhesive seam holding the platforms and remove them from the window.
8. Clean the surface of the plastic from glue residues with alcohol or lighter gasoline.
9. If the curtain brackets are secured with screws, you need to pry the roll fastening clamps in the brackets with a flat screwdriver and remove the clamps or remove the decorative plugs holding the roll in the brackets.
10. Remove the curtain assembly from the brackets.
11. Use a Phillips screwdriver to unscrew the screws and remove the brackets.
12. Seal the holes with white silicone.
13. When placing the brackets on the brackets, you need to open the window sash, simultaneously press both brackets from bottom to top with your thumbs and remove the brackets from the sash.
14. If plastic guides are glued to the window, they need to be removed using a utility knife from top to bottom. It is necessary to place the knife blade between the upper end of the guide and the bead, use leisurely rocking movements of the blade to trim the adhesive layer, and separate the guide from the bead.
15. When attaching magnetic curtain elements to a window, use a Phillips head screwdriver. Unscrew the magnets.

How to hang it back

The blinds are assembled according to the same principle as they were removed. The whole process happens in reverse order.

Before you start dealing with accumulated dirt, you need to carefully examine the blinds.

First, put the slats on the fasteners, then insert the gears and fix the plugs. It is important that blinds or roller blinds are dry.

Otherwise, they may attract even more dust and dirt while hanging. Close the windows tightly to prevent street dust from settling on the slats.

Dismantling a cassette with aluminum guides secured with self-tapping screws

Actions:

1. Disengage the chain from the holder.
2. Remove the two end stops from the chain.
3. Raise the curtain all the way up.
4. Remove the cassette plug from the chain mechanism side. Place your fingers on the side surface of the cassette plug, rest your thumb on the top of the plug and pull the plug from the cassette towards you. Leave the plug hanging on the chain.
5. Remove the second plug in the same way.
6. Unscrew the two bottom screws or self-tapping screws securing the cassette using a Phillips-head screwdriver. Unscrew the two top screws or self-tapping screws securing the cassette.
7. Lift the cassette and remove the blade from the guides. Place the cassette aside.
8. Remove the guides glued to the tape. Using the blade of a stationery knife, pry the guide from above and cut the layer of glue with smooth rocking movements, moving the knife from top to bottom.
9. Remove the chain holder. Remove the plastic cap. Unscrew the screw or self-tapping screw with a screwdriver.
10. Seal the remaining screw holes with silicone.
11. Remove the adhesive from the tape from the window with alcohol or lighter fluid.

Terms of use

Roller blinds will last a long time if you follow these simple rules:

1. All actions to control the mechanism are performed smoothly, without jerking. If the control rope gets tangled, do not pull it, untangle it, then pull it gently.
2. The more often you ventilate the room, the longer the roller blinds will retain their appearance. In a fresh room, they will not accumulate odors.
3. Treat the fabric with care, do not touch it with wet hands; when washing windows, collect the curtains, do not bend the fabric.
4. If the mechanism begins to jam, lubricate it with a special compound.
5. It is not recommended to hang the product near the stove, electrical appliances, or batteries.

When choosing, don't settle for the cheapest options. For an example of how to care for roller blinds, watch this video:

If you want the canvas to serve for a long time, it must be dense, moisture-resistant, and impregnated with protective compounds.

Dismantling a cassette with aluminum guides secured with tape

Actions:

1. Disengage the chain from the holder.
2. Remove the two end stops from the chain.
3. Raise the curtain all the way up.
4. Remove the cassette plug from the side of the chain mechanism, leaving it hanging on the chain.
5. Remove the second plug.
6. If the cassette is attached to the adapter, rest the fingers of your right and left hands on the casing, pry the casing from below with your thumbs and separate the cassette with a twisting movement from bottom to top. Remove the adapter, glued with double-sided tape, using the blade of a stationery knife.
7. If the cassette is attached to the window without an adapter, pry its upper left or upper right edge with the tip of a knife blade and break the adhesive connection with cutting movements. Alternately cutting the left and right adhesive seams of the cassette from its ends, tilt the cassette towards you until it is completely free.
8. Remove the guides glued to the tape using the blade of a utility knife.
9. Remove the chain holder. Remove the plastic cap. Unscrew the screw or self-tapping screw with a screwdriver.
10. Seal the remaining screw holes with silicone.
11. Remove the adhesive from the tape from the plastic surface of the window with alcohol or lighter gasoline.

Did you manage to remove the roller blinds from the window?

Not really

Terms of use

Roller blinds will last a long time if you follow these simple rules:

1. All actions to control the mechanism are performed smoothly, without jerking. If the control rope gets tangled, there is no need to pull it, untangle it, then pull it gently.
2. The more often you ventilate the room, the longer the roller blinds will retain their appearance.

In a fresh room, they will not accumulate odors.

• Treat the fabric with care, do not touch it with wet hands, when washing windows, collect the curtains, do not bend the fabric.
• If the mechanism begins to jam, lubricate it with a special compound.
• It is not recommended to hang the product near stoves, electrical appliances, or batteries.

When choosing, don't settle for the cheapest options.

For an example of how to care for roller blinds, watch this video:

If you want the canvas to serve for a long time, it must be dense, water-resistant, and impregnated with protective compounds.

Removing the Uni Cassette with Spring Mechanism

Actions:

1. Turn the lock by the handle to a vertical position. Raise the curtain.
2. With the blade of a stationery knife extended 3 cm, trim the adhesive layer at both ends of the cassette.
3. Separate the cassette from the frame or sash.
4. Remove the lower plugs of the aluminum guides.
5. Using the blade of a utility knife, trim the adhesive layer that holds the guides on the frame or sash beads.
6. Remove the guides.
7. Use alcohol or lighter gasoline to remove traces of tape from the window.

Caring for vertical blinds

Proper regular care of vertical blinds will increase the time before their general cleaning. You can wash the strips that make up the product by leaving them hanging on the ledge.

1. To do this, use a vacuum cleaner with a separate attachment for furniture. You should choose the delicate mode so as not to leave creases or damage the fabric.
2. Dissolve a mild furniture cleaner in warm water. Any liquid substance, such as washing gel, will do.
3. Using a sponge or cloth soaked in soapy water, wipe the entire surface of the material or pay special attention to dirty areas.
4. Remove the cleaning agent with clean water using a rinsed soft towel.
5. Allow the strips to dry on their own. Why do they provide good air conditioning for the room?

Removing the cassette with a spring mechanism located on the bottom bar of the sash or window frame

Actions:

1. Turn the curtain lock away from you by the handle and lower the curtain fabric down.
2. Place your fingers on the top of the cassette casing, resting your thumbs on the bottom of the cassette. Turn the upper part of the casing towards you, removing the cassette from the adapter. Remove the remaining part of the blade with the lock from the guides.
3. Trim the adhesive seam with the tip of a knife from the left or right end of the adapter. Pull the knife blade out of the body by 4 - 5 cm. Place the blade behind the adapter strip and cut the glue along its entire length with cutting movements up and down. Remove the adapter from the window.
4. Remove the guides glued to the tape
5. Use alcohol or lighter gasoline to remove traces of tape from the window.

How to properly wash blinds

Blinds must be washed and cleaned according to the operating instructions. Fabric slats can be washed in a machine, but wooden slats will only need to be cleaned with a vacuum cleaner.

There are special devices for washing blinds.

1. When dry cleaning, do not use water. Purchase special brushes and sponges for cleaning slats. They collect dust well, hold it and do not spread it throughout the room. Start wiping from the top bar, gradually moving to the bottom.
2. Washing with detergent is a favorite method for many owners. Soapy water perfectly removes dust and dirt, eliminates unpleasant odors, and gives the blinds a radiant look. Dissolve a little laundry soap, dish gel or washing powder in a bowl of warm water. Then rinse with clean water and wipe the slats dry. This method removes even the most stubborn stains and dirt.
3. Window cleaner is also suitable for cleaning slats. Close the blinds so that all slats are horizontal. Spray them with window cleaner and wipe dry with a clean sponge or cloth. This cleaning method is quick, but requires a lot of rags or paper towels.
4. The easiest way is to clean the slats with disposable wet wipes. Buy several packs and use one at a time. The method is good when you have one small window with a small number of slats.
5. The steam generator copes with the most stubborn stains. It does not spoil the surface of the slats and is suitable for all types of blinds, except wooden ones.
6. If you have wooden blinds, use special polishes, waxes and other products to care for furniture made from this material.

Use special cleaning products.

Actually, nothing complicated

Washing roller blind fabric is no more difficult than usual.

But before the roller blinds need washing, you can use several methods to limit contamination:

1. In order to keep the canvas clean, ventilate the room.
2. You can also systematically wipe the roller blinds with soft cloths or with a regular vacuum cleaner with a fabric attachment, so as not to damage the structure of the canvas.

But, despite daily care, the curtains will have to be washed at some point, because the smell may remain in them, and stains may not be washed off.

Now let's look at how to remove roller curtains in order to wash them.

First of all, you need to determine what type of mount you have:

1. if the roller blinds are attached to self-tapping screws, then you will have to unscrew them and remove the base on which the canvases are fixed;
2. if you have a mount on a spring bracket, then everything is simpler - pry up one of the mounts and carefully remove the roll;
3. if the canvases are secured with adhesive tape, simply peel them off.

Further washing is done by hand.

Stains

You should be careful with stains on such curtains, as simple bleaches and chemicals can damage the fabric. Therefore, you should choose a stain remover based on the type of fabric you have.

At the end, we invite you to watch the video, which contains good material on how to properly wash curtains.

After you have washed and dried the curtains, you can safely fasten them back, and they will please your eyes as before. Happy washing.

Tips for use

If you need to wash them, you should:

• roll them up;
• disconnect the fishing line;
• unhook the weight plug;
• remove the protective capsule;
• remove the tube with tissue using a screwdriver.

To pull out a roll of fabric, you need to press on the latches located in the side brackets

Important! This item cannot be wrung out. You can iron the curtain with a slightly hot iron.

The advantages of such curtains include:

• variety of control systems;
• the ability to fix the material at almost any height;
• cleaning with a damp cloth;
• technology of impregnation of the product with a special composition;
• combination with traditional curtains;
• Possibility of placement in doorways;
• large selection of textures and shades.

The only disadvantage is that the working mechanism sometimes quickly fails.

Lubricating the rubbing parts of curtains increases the service life of plastic parts

How to wash fabric slats in a washing machine

As mentioned above, automatic washing is not suitable for all types of slats, and before washing the blinds in the washing machine, check what fabric they are made of. Machine washing will not harm products made from synthetics, but it is better to wash slats made from natural fabrics by hand. After being in the machine, they can stretch or, on the contrary, shrink and lose their attractive appearance.

The sequence of actions when washing fabric slats in an automatic machine is as follows:

1. Before putting the blinds into the drum, you need to prepare the blinds for washing: after removing the curtains from the curtain rod, roll them one at a time (or 3-5 pieces) into loose rolls (to prevent the rolls from unwinding, you can put elastic bands on them for money), put them in a washing bag or in a pillowcase. It is not necessary to remove the weights.
2. The bag with the prepared lamellas is loaded into the drum. Delicate wash gel is poured into the detergent compartment. When washing blinds in a machine, do not use powder because it leaves whitish streaks on the slats.
3. We use the “hand wash” program. In this case, we turn off the “drying”, “spin” and “rinsing” modes.
4. After washing is completed, the lamellas are carefully unfolded one at a time and rinsed one at a time in water at room temperature. They cannot be twisted or squeezed out.
5. Dry the slats over the bathtub or in the open air, but in the shade, carefully hooking them to the top with clothespins. The ideal option is to let the water drain from the canvases and immediately attach them to the cornice, not forgetting to close the window first.

To make the strips quickly take their original shape, you can hang additional weights on their bottom with clothespins.

Aesthetic and practical

The use of plastic profiles has led to changes in the design of houses. Heavy curtains have been replaced by functional devices. They are easy to maintain. This should be taken into account.

Roller blinds, often used in modern interior design, are easy to care for and use.

The only disadvantages are that they cannot adjust the direction of light and look a little “laconic”. Although the entire space of the room is used as rationally as possible.

Let us add that plastic windows differ from their wooden counterparts. Ordinary curtains do not look very aesthetically pleasing with such glazing.

Method for removing a horizontal structure

To dismantle you will need to disconnect the cornice from the brackets. If the blinds are plastic, then you need to move the top fastenings, if they are metal, they are moved to the side or the entire structure is lifted up. Some models are attached to screws that need to be unscrewed, some have a Tris-latch, which can be pushed away with a finger without applying much effort.

Horizontal blinds with latches can be removed with a little effort.

When mounting the bracket in an L-shape, first remove the side plug, then bend the ears of the structure and remove first the front side, then the back.

Have you decided to install horizontal blinds? Especially for our readers, we have compiled a review of the best online stores in Moscow. where you can easily buy horizontal blinds.

You can also read here where to buy or order vertical blinds. examples of the best online stores.

Read how to install and operate blinds in our article “Installation, repair and maintenance of horizontal blinds.”

Components of roller blinds

In order to prepare the box, light wood species are used. The fabric must be environmentally friendly and non-toxic. The components of the cornice include:

• canvas;
• plugs on the sides;
• inside – control mechanism;
• on the side is the control chain.

Main parts of roller blinds

An example of an open type roller blind configuration

Thus, the package includes the required components, fasteners and instructions with pictures. Let us add that installation can be in the window opening, on the frame or simply on the sash. The last method is most often chosen. They can even be installed on a glass door. It's comfortable!