A bath curtain remains the most convenient and stylish accessory, allowing you not only to protect the room from flying splashes of water while taking a shower, but also to divide the bathroom into several functional zones.
Previously, string or thick fishing line was used to attach a waterproof curtain. However, these devices are inferior to modern types of rods in design and performance.
This accessory can serve as an independent decoration of the room, especially if the curtain rod in the bathroom has a non-standard curved shape, emphasizing the relief line of the installed plumbing fixtures. Anyone can install curtain rods themselves. Knowing some little things will make the installation process easier.
Curtain rod for the bathroom: materials, shapes and characteristics
At first glance, separating the bathtub and shower from the rest of the room is a fairly simple task. It is enough to install the crossbar, hang the curtain and start using the structure. However, it is not. There are many features that depend on the material of the cornice, the size and decor of the room, as well as the configuration of the bath (shower).
Articles on the topic (click to view)
- Step-by-step instructions for creating Japanese curtains with your own hands
- Photo of the kitchen and bedroom interior with Japanese curtains
- Electric drive for curtains
- Photo of interior design 2020 with curtains
- Photo of a living room with panoramic windows
- Photo of the living room interior with curtains on the bay windows
- Kyarniz for a sloping window
Original spiral rod with shower holder
In bathhouses without any frills, there is often a straight crossbar installed for curtains and fulfilling a purely practical role - covering the walls and floor from splashes.
Straight rod - the most common and versatile option
But for more or less design projects, where the geometry of the bathtub and the separated area can be individual, unusual designs are used - a semicircular cornice, oval, U- or L-shaped, as well as asymmetrical. Thanks to the curves, you can maximize the protection of areas not intended for swimming.
The use of steel strings is now a rare case, since a thin product quickly loses tension and sags, which looks unsightly.
The use of simple structures, such as a straight stick (solid or sliding cornice) or a string, is convenient in small rooms with a standard layout. A suction cup or bracket is used as a holder.
When installing rods, it is important that the hand can freely move the curtain, closing it, and be able to fold the canvas so that it does not interfere after washing. A dense, moisture-repellent material is chosen as the basis for curtains. It is necessary to balance the weight of the curtain and the strength of the fastening so that the rod can withstand the planned loads.
Cornices are made from different materials:
- metal (aluminium, chrome and alloy steel);
Metal models are considered the most practical
A wooden curtain rod is chosen if the apartment owners want to emphasize the originality and aesthetics of the bathroom interior design
In design projects there are combined options - steel or aluminum with natural materials, etc. They are good for bathrooms with eclectic elements and color variety. The gamma may differ from the overall design, but should fit organically into it.
Coated aluminum rod - a combined product with a durable metal base, coated with special enamel or plastic
- the product must repel moisture well (have anti-corrosion properties);
- The model is selected in size taking into account the height of the ceilings, bathtub and shower installation.
Curtains are hung from the curtain rod using rings (plain or with clips), hooks, loops or grommets. The latter option is only suitable for thick fabrics and is more expensive.
The simple design of small bathrooms assumes the absence of massive objects. In such rooms it is better to get by with a polymer crossbar - solid or telescopic.
Expert opinion
Smirnova Ekaterina Anatolevna
7 years of experience in interior design, professional architect
For individual projects in large rooms, a cornice with a curtain serves as a visual zoning, so you need to immediately provide design options, whether it will be classic, hi-tech or art deco.
Materials and shapes of sliding curtain rods
To make sliding curtain rods, manufacturers use the following materials:
- Aluminum is a fairly light and unpretentious material that is not afraid of rust; it can withstand standard curtains perfectly. This material is not as durable as stainless steel, but can last for many years without repair or replacement.
Important! The aluminum sliding cornice can be painted in any color, which makes it possible to use it in any interior.
- Plastic is by far the most common and cheapest option. It will not last very long, but since its cost is quite low, you can change it at least every year. The advantages include a variety of colors, the ability to choose a product with a metal, wood or even leather finish.
Important! The obvious disadvantage of plastic is its short service life and tendency to quickly become dirty.
- Wood - this option is not used as often as the previous ones, but attracts with its originality. Before hanging the curtain in the bathtub on a wooden cornice, it should be treated with a special compound that will prevent changes in the structure of the material. One of the clear advantages is the unique aesthetics.
Important! A significant disadvantage of the material: in conditions of high humidity in the bathroom, such a cornice can become unusable over time, and such things are expensive.
Brackets/curtain holders
Bathroom curtain mounts come in different types. A flange or bracket is usually used as a holder. For straight, angular and semicircular rods, two such fastenings are used - on the walls.
Holder for attaching a simple rod to the wall without drilling
With their help, a cornice is installed, the curtain on which will cover the shower along part of the perimeter.
Attaching a tubular metal curtain rod to the wall
The round flange consists of two rings - external and internal, inserted into each other and covering the ends of the rod. There are holes for wall mounting. The flange covers the installation site and makes the crossbar look solid and aesthetic.
Curtain holders are made from various materials. They may differ from the base of the barbell. This can be a metal, wooden or plastic holder. Moreover, polymer brackets today are produced quite durable.
The metal rod must be made of high-quality material, otherwise rust will appear on it
It is important to know! They do not install cornices with suspensions on suspended or suspended ceilings.
When choosing rods, they are guided not only by the potential reliability of the fastenings, but also by their aesthetic appearance. You can install products in gold, bronze or silver, streamlined or square, angular.
In design projects there are carved fasteners, as well as with a relief outer part. You definitely need to know how durable the coating will be, since cheap spraying often peels off quickly under the influence of moisture and the product becomes unsightly.
True, some projects may involve special “aging” of the material for retro room designs.
Ceiling holders for curtain rods in the bathroom
When installing curtain rods and selecting fasteners for the bathroom, you need to consider how the structure will look in the overall environment.
Shapes of rods for curtains
The main criterion for choosing the profile shape of the rod is the shape of the bathtub bowl itself. A straight, standard-sized bathtub installed against a wall is most often complemented by a straight telescopic or solid rod, attached to the ends in opposite walls.
The semicircular shape of the bar corresponds to the angular position of the bathtub, both straight and semicircular or oval, installed against the wall. Semicircular or with a certain bend of the arc, the design can be round, rectangular, or profile. The tubular section of a small-sized curtain rod has a fastening unit with a bolted or anchor connection to the wall. For rods longer than 2.0 meters, it is recommended to have an additional support point with a fastening unit.
For bathtubs with a corner arrangement, a corner rod of both solid and composite construction is provided. Small bathtubs or shower trays have two mounting points on the walls, but for impressive volumes it is recommended to choose the option with the additional installation of a rack or ceiling rod.
Exclusive round, oval or rectangular rods, installed above bathtubs that are centrally located in the room, have a durable ceiling or floor mount; such rods are made only of metal or light alloy, and the mounting option depends on the author’s decision of the project.
One-piece types of structures made from a monolithic section of profile are convenient due to their ease of installation and use, while composite ones require attention and accuracy during assembly. At the same time, monolithic rods made of light alloy profiles can take on different shapes due to their correct bending. It is not recommended to carry out such an operation on your own without sufficient experience and equipment, since correct shaping in two planes, without outside help and experience, does not always work out beautifully. It is easiest to achieve the required arc with a metal or aluminum profile of round or oval cross-section.
Curtain rod for the bathroom
Before purchasing a curtain rod for the bathroom, it is recommended that you first familiarize yourself with all the existing variations presented on the market of goods and services. On sale you can find corner, telescopic, arched, rigid, flexible, “L” shaped and many other types of curtain rods designed for attaching curtains in the bathroom.
In addition, products may differ from each other not only in shape and size, but also in the material used in the manufacturing process. That is why it is so important to know all the nuances in order to choose the right model in the future.
Installation Tips
Before you can properly hang curtains in the bathroom, you need to install a bracket. Installation depends on the design. The cornices must be adjusted to the size of the room: the pipes in the bathroom are aligned to the exact placement between the walls.
To attach telescopic models, it is necessary to remove the protective caps from the ends of the cornice. The rods are extended to the required distance so that the ends rest against the opposite walls of the bathroom.
Then the optimal height for the bracket is outlined. Caps are put on the pipe. The holder must be secured strictly horizontally. Symmetry must be checked with a building level. Then you need to install the curtain on the rings.
The semicircular structure is attached to the wall. To do this, you need to determine the height and mark the places for fastening. Then the holes are drilled into which the dowels are inserted. After installing the fasteners, the bracket is suspended.
Complex, heavy semicircular and corner elements are mounted using additional fastening to the ceiling - for reliability. The option of auxiliary fixation is possible if the bathroom does not have suspended ceiling structures.
When attaching long curved brackets to the ceiling, experts advise providing additional support - near the wall. The same method of strengthening the structure is recommended when the curtain is made of heavy fabric. The curved rod must be attached to an adjacent or opposite wall.
Types of design of cornices in the bathroom
Cornices designed for attaching curtains in the bathroom may differ in a number of parameters. In the first place is the form of fastening, the choice of which depends entirely on the room itself. The installed product must completely protect the floor and walls from water ingress during water procedures.
Cornices are divided into the following types:
- Direct is the most popular option, the distinctive feature of which is a high level of stability and ease of installation. Great for rectangular shaped rooms.
- Corner - in this case, models can be in the form of the letter “G”, “P”, semicircular, oval or rectangular. Such models are great for bathtubs that are located in the corner of the room or in the center. This category also includes asymmetrical rods, which are an excellent addition to bathtubs that have a non-standard shape.
- Telescopic - are sliding models, the distinctive feature of which is length adjustment. These options do not require making holes in the wall to install them.
- Fan - such cornices, as a rule, can be assembled and laid out like a fan; they look quite original.
- Strings - resemble in appearance a string made of metal.
When choosing a cornice option for a bathroom, it is important to pay attention not only to the attractive appearance, but also to its functionality.
Corner curtain rod for bathroom
Corner shower rod measuring 80x80 cm is currently the most in demand on the product market. Such models, as a rule, are used not only for bathtubs, but also for showers.
These products are in demand in cases where it is necessary to enclose a bathroom or shower located in the corner of the room. A feature of this design is a high level of possibility, as a result of which it is possible to prevent splashing of water not from one, but from both sides at once.
Straight cornice for the bathroom
As practice shows, straight curtain rods for bathrooms are the most common options, which are used much more often than others. In most cases, such options are used for large rooms, since standard cornices are unlikely to fit in size.
Expert opinion
Smirnova Ekaterina Anatolevna
7 years of experience in interior design, professional architect
Aluminum can be used as a material, but if you rely on durability and quality, then it is best to give preference to a product made of stainless steel.
Telescopic rod for curtains in the bathroom
A telescopic rod for curtains in the bathroom is considered one of the most convenient models today. Its convenience lies in the implementation of installation work.
In addition, if necessary, you can fix the length of the product without cutting off the existing excess. The only thing worth considering in this case is that the product must be of high quality.
Semicircular arc for curtains in the bathroom
Semicircular arcs for installing curtains in the bathroom are in most cases used as a replacement for corner products. Such options will be an excellent addition to the bathroom when the bathtub is installed in the corner of the room, and it has curly contours on the outside.
The advantage in this case is the aesthetic compliance and mechanical parameters of the product used.
Cornice for asymmetrical bathtub
In cases where the bathtub has an asymmetrical shape, non-standard shaped cornices are used. As practice shows, similar products that would be suitable for a specific case are quite difficult to find on sale, as a result of which many experts recommend placing individual orders for the production of curtain rods for the bathroom.
Materials used for manufacturing
For such a relatively simple element that does not require outstanding strength characteristics, the element can be constructed from traditional decorative materials:
- Plastics;
- Metal;
- Metal with polymer coating;
- Metal with anodized coating.
Each of the presented construction materials has its own positive and negative sides, which significantly influence the choice and use of a bar in the bathroom. The method of fastening the structure also depends on the material of manufacture, because for some materials the use of a spacer in the form of an internal fastening unit is simply impossible.
Using plastic as a material for a curtain rod in a bathroom allows you to get rid of such unpleasant aspects as rust, metal corrosion, darkening of the surface and peeling of the paintwork. Such rods are durable and convenient for non-standard solutions, for example, when arranging curved rods for curtains.
The use of straight-shaped plastic rods with plastic fixing elements, without metal structures, significantly reduces the cost of installation and operation, because the absence of metal guarantees the absence of corrosion in the connecting elements. The negative side of plastic is its relative fragility, especially in models made by unknown manufacturers, the need to periodically tighten connections and monitor fixation points.
Metal rods for bathroom curtains are used most often today; the rigid design of the fastening elements and the metal itself allows such an element to be used more often. The metal rod allows you to provide several options for attachment points and fixation points. Metal rods are durable and do not require special care; most of them have either a polymer coating, in the form of a layer of plastic, or paint and varnish in the form of a layer of alkyd enamel. At the same time, metal in such a specific room as a bathroom with high humidity without working ventilation is susceptible to corrosion, which must be taken into account when choosing a model.
Polymer-coated metal rods for bathroom curtains fit perfectly into any interior, because a huge range of plastic colors and patterns very easily solves the problem of matching all design components. The plastic coating of metal rods reliably protects the metal from moisture and gives the structure additional rigidity. Plastic makes it easier to maintain and extends the life of this barbell.
Curtain rods made from light alloys, for example, aluminum, can have a decorative metallized coating. Metal structures in the form of a profile are most often used in the design of complex profiles - curved, angular, round and oval. The advantage of this version of the model is its simplicity and elegance, which can emphasize the individuality of the room design project.
Installing a shower curtain rod
It is important to understand that the installation of cornices follows the same principle. Undoubtedly, there may be some nuances, mainly they relate to the method of fastening.
For example, some models are fastened at two points; for some options there should be more fastenings. In order to complete the work, you will need special tools, namely a hammer drill, screwdrivers, a hammer, as well as a simple pencil and fasteners.
Why is it better to attach a curtain rod to a bathroom?
When carrying out installation work, it is worth taking into account the fact that fastening can be carried out in several ways. For example:
- to Wall;
- ceiling surfaces.
Depending on the chosen fastening method, the choice of fastening elements will also depend. In addition, it is recommended to first take into account all the advantages and disadvantages of curtain rods in the bathroom.
For example, the most unreliable model today is a telescopic curtain rod, as a result of which it is not recommended to be used in homes where there are small children.
Installation of a corner shower curtain rod
If you plan to install a corner cornice in the bathroom, then it is recommended to carry out the work according to the following step-by-step algorithm:
- First of all, it is recommended to adjust the bar to the dimensions corresponding to the bathroom. To do this, you will need to first take measurements, determining the distance from the outer corner to the wall for the short and long sides. If the product turns out to be quite long, then the excess should be trimmed.
- After the marking is completed, it is necessary to fix the product at the desired level.
In this case, you can use a corner shower curtain rod 90x90 or 80x80 cm.
Installation of a semicircular shower curtain rod
When choosing a semicircular curtain rod for a bathroom curtain, many experts recommend taking into account the fact that these products definitely require the installation of additional fasteners. This is due to the large length of the element used.
Thus, the places of bends, that is, the corners, need additional fixation - it is in these places that there is an increased risk of sagging forming during operation. In this case, it is best to use suspensions.
The installation process is no different from installing other models.
Installing a telescopic curtain rod in the bathroom
If a telescopic rod was purchased, then all installation work will be limited to stretching the purchased product between two parallel walls in the room and, after adjusting the height, securing the cornice.
In this case, many experts do not recommend using a marker for marking. This is due to the fact that it is quite difficult to remove it in the future. It is worth using a level while working.
Choosing a curtain mount
The bathroom is one of the rooms in the house that requires the use of only high-quality finishes and accessories. This need arose due to the presence of high humidity, and the room also requires a high degree of comfort.
One of the accessories that you simply cannot do without in the bathroom is a curtain. It is best at preventing water from splashing when swimming or showering.
The curtain component is a multifunctional metal telescopic curtain rod. It is thanks to this that it is possible to mount this product on the bathroom wall.
Types of rods for curtains in the bathroom
The typical difference in cornices allows you to install a more suitable design in a particular room. When choosing, it is important to know the features of the material, installation and performance characteristics so that the crossbar will serve for a long time.
Expert opinion
Smirnova Ekaterina Anatolevna
7 years of experience in interior design, professional architect
If a temporary option is envisaged, planned as a predecessor to the main one, then first it is better to choose an inexpensive model, the installation of the fastenings of which practically does not damage the walls.
Various bathroom rod configurations
Telescopic rods
The pipe for curtains in a telescopic bathtub is usually made of plastic, although metal products are also found. The design feature is the “stringing” of pipes. During installation, this allows you to adjust the crossbar to size. If a corner is formed, then choose the appropriate model.
The telescopic rod looks like a telescope and is easy to install
The material of the walls for installing the telescopic pipe is not particularly important. You can mount it on a painted surface or tile. A convenient option is installation on suction cups, since the design is lightweight and can withstand its own weight and the curtains. Also, the rods are simply attached to the wall with their wide ends and fixed in length.
Telescopic rod makes it easy to install and fix the desired length of the product
The telescopic cornice is equipped with rings for attaching the curtain; another type is not suitable, since the bells will interfere with the movement of the curtain along the crossbar.
- simplicity and efficiency of installation;
- versatility (suitable for most interior styles);
- the ability to adjust the crossbar to size without cutting it;
- cheapness of the product;
- no mechanical damage to the walls during installation.
Disadvantages of telescopic curtain rods:
- Suitable only for small bathrooms;
- not recommended for the design of corner structures;
- They can only withstand the light weight of curtains.
Today there are reinforced polymer products on sale that can withstand the increased weight of the curtain fabric. Metal holders and hangers can strengthen the structure.
Corner/L-shaped rods
Sometimes the configuration of the bathtub requires the installation of a certain type of curtain rod. Open on both sides - a short one and a longer one - the baths require an L-shaped fence so that the room does not flood with water from the shower.
Corner models in the shape of the letter L imply mandatory additional fixation of the finished structure to the wall, ceiling or floor
A corner rod for a bathroom curtain is installed on several or one hanger - this way the structure will be in a constant position and not sag under the weight of displaced curtains. The top fastening is not done if the room has a suspended ceiling.
The main advantage of a corner curtain is the ability to solve the problem of effective splash protection not in one, but in two directions
A curtain rod for a bathroom - in this case a corner rod - is most securely fixed using brackets mounted on self-tapping screws. Metal strings are used as suspensions. Most often they do one - on the open outer corner.
The size of the cornice varies depending on the specific area that needs to be covered. If the purchased design does not fit, it can be cut off.
Advantages of corner products:
- can be adjusted to fit the size of the bath/shower;
- reliable.
Cons of corner bars:
- without hangers, the curtains can quickly bend under the weight of the curtain;
- the method of fastening affects the integrity of the wall surface.
U-shaped rods
Such cornices are similar in shape to corner ones, but are more difficult to install. In contrast, U-shaped rods cannot be attached only to walls; hanging holders (at least two) must be used.
Expert opinion
Smirnova Ekaterina Anatolevna
7 years of experience in interior design, professional architect
A cornice with a U-shaped straight shape is used for round or oval-shaped plumbing fixtures, which are installed tightly to the bathroom wall
U-shaped structures are used for oval or round baths, installed to the wall on only one side.
Rods of this type are made mainly of durable steel. In individual orders, bronze or gold plating can be used.
U-shaped bathtub curtain rods have two wall fasteners and two additional ceiling fasteners
- reliability;
- maximum splash protection;
- When installed correctly, curtains can withstand a lot of weight.
- Custom order required;
- more expensive than regular curtain rods.
Semicircular/curved rods
In non-standard bathrooms with designer baths, it is difficult to choose ordinary curtain rods - they will not fully fulfill their practical function. Therefore, when designing them, shaped crossbars are used - semicircular or with several bends.
It is important that the rings strung to move the curtain do not linger on the turns of the pipe, but freely pass through the relief area.
Semicircular rods are best suited when a bathtub with a shaped outer contour is installed in a corner
A rod designed for a bathroom curtain can cover one or two sides of the bathtub or be located around the perimeter. It depends on the location of the object - whether it is away from the wall or not.
Arc, semicircular rods are designed for corner bathtubs of standard or round shape
A popular shower arc is one that covers the water source on both sides. The curved cornice can be made of chrome-plated steel, brass, plastic, bronze.
Moreover, PVC is used less frequently, since the likelihood of the structure sagging is too high, especially when using heavy curtains. If they are used, then you need to choose a pipe rather than a flat one, since there is a high possibility of the material cracking under load.
Complex rods usually come with installation instructions. When installing it yourself, you need to carefully study it, and only then begin to implement your plans.
A bathroom with a tiled finish requires special installation of cornices. Do not fasten the product at joints - the material can easily crack and crumble.
Hang curtains on rings or curtain rod hooks. Before installation, it is necessary to measure the height at which the crossbar will be mounted. Usually at least 20 cm is left between the ceiling and the cornice.
Note! For round or elongated bathtubs, showers with open sides, closed structures are used that are mounted on hangers. They use not one, but two curtains.
Non-standard forms of cornices are usually made to order, since they are almost never found on sale.
String rods
This type of cornice is used in small rooms. Its use is designed to lighten the interior, creating maximum space. The product fits organically into the environment.
High-strength steel is used to make the rods. Due to the thinness of the design, the string is almost invisible against the background of the wall - the curtain itself comes to the fore. Hooks bent on both sides are used as curtain holders. Eyelets and rings do not fit.
String ceiling cornices look like a metal string, are functional and easy to use
Advantages of string cornice:
- low cost;
- efficiency and ease of installation;
- strength;
- long service life.
- subsidence of the cornice under the weight of the curtain;
- unpresentable appearance in large bathrooms.
Double rod for curtains in the bathroom
Parallel cornices are installed to increase the functionality of the crossbars. Both rods can serve as a holder for curtains that slide apart like curtains. Either one of them is used for curtains, the other is used to dry clothes.
The double curtain rod for the bathroom is made of aluminum and painted chrome, can be used to dry towels after a shower
The convenience of double rods is highly valued in families with children - you can hang small things on the rod. The material is selected based on the principle of non-marking - plastic or stainless steel.
The double curtain rod can be used with a primary protective vinyl or polyester curtain and a fabric curtain attached behind
A double cornice is attached in the same way as a single one - on the adhesive part or self-tapping screws with brackets. Which crossbar to choose for a curtain - internal or external - is determined based on ease of use.
Expert opinion
Smirnova Ekaterina Anatolevna
7 years of experience in interior design, professional architect
When washing by hand, it is better to release the bar closer to the bathtub so that the water flows into the bathtub. When using a machine with spinning, it is more convenient to use an external cornice.
You can combine cornices in shape - round and flat, like curtains for rooms. The first one will act as a drying bar.
You can find paired curtains on sale, but often there is a need to adjust them to the size of the bathtub. They are mainly made to order.
Advantages of double curtain rods:
- installation complexity;
- relative high cost.
White plastic double rod suitable for any bathroom
How to install a curtain rod in the bathroom yourself - 3 options
I don’t see the point of talking in detail about how to install a telescopic rod; there are instructions for this that even a complete amateur can understand. The spring model just needs to be squeezed, inserted and released, while the screw version needs to be inserted and unscrewed until it stops.
Installation of the telescopic structure takes no more than 5 – 7 minutes
We will look at the static option for installing a curtain rod in the bathroom and 2 extraordinary options. Simply put, folk know-how. But first, a few words about the instrument.
A few words about the instrument
To install a telescopic curtain rod, no tools are needed at all. As for static mortise models, you will need a small kit for their installation.
- Hammer or impact drill.
- Hacksaw for metal.
- Kern.
- Hammer.
- Roulette.
- Screwdriver.
Option #1. Static mounting on brackets
Important! The height of the curtain rod in the bathroom fluctuates around 1.6 m. With this approach, the curtain is lowered 20 cm inside the bathroom, which prevents water from spilling onto the floor. The shower curtain rod is mounted at the level of the diffuser.
| Illustrations | Recommendations |
| Measuring the cornice We measure the tube and, if necessary, cut off the excess with a hacksaw. Don't forget to take into account the thickness of the brackets. | |
| Deciding on the place The height of the suspension has already been mentioned, I will only say that from the ceiling to the cornice there should be at least 20 cm for ventilation. | |
| Marking for the holder At the desired height, attach the holder to the wall and mark the entry points of the screws. According to the rules, to mark the opposite bracket you need to use a hydraulic level, but in practice, the horizontal of the rod is usually determined by eye; an imperceptible distortion of a few millimeters does not affect the functionality. | |
| Drilling holes A drill with a diameter of 6 mm is used for a standard plastic dowel.
| |
| Drive the dowels Plastic dowels are simply inserted. Keep in mind that different types of dowels or anchors are used for monolithic walls, plasterboard and walls made of cellular concrete (foam and aerated concrete).
| |
| Screw the holder Simply place the bracket and secure it with self-tapping screws. | |
| Decorative overlay Then the rod is inserted into the groove of the bracket and all this is covered with a decorative cover included in the kit. Half of these covers are simply put on the bracket, but there are caps with additional fixation, as in the photo on the left, there is a small screw at the bottom that needs to be screwed in to fix the cover. |
Option #2. U-shaped or corner model suspension
As already mentioned, the U-shaped or corner rod must be suspended at 3 points. But manufacturers save money and not all models have a top mount. There is a decent, and most importantly inexpensive way out of this situation.
| Photo | Recommendations |
| Basic model We have a U-shaped rod consisting of a set of metal tubes that are connected through plastic adapters. As planned, the rod is fixed to the wall with two static brackets. So that over time, under the weight of a wet curtain, these brackets do not become loose, we need to organize an intermediate suspension. | |
| Hanging hole In our case, the design consists of 4 tubes, 2 tubes on the sides and 2 tubes in the center. We take a two-millimeter drill and make a hole in the plastic adapter between the central tubes. | |
| We tie the fishing line. We choose the thickest fishing line and thread it through the hole, tying it. | |
| Support for suspension In our case, the height of the ceilings allows us to organize support on the load-bearing wall. If the ceilings are low, then an anchor or dowel-nail can be driven into the ceiling. | |
| Suspension In the photo on the left, the arrows point to the fishing line fixation points (on the rod and on the wall). Then all you have to do is make a loop on the fishing line and hang the structure.
|
Option #3. Homemade bathroom rod
The cost of a high-quality telescopic model fluctuates around 1000 rubles, so people are trying to find more acceptable options. The homemade bathroom rod described below is striking in its simplicity and accessibility.
| Photo | Recommendations |
| Tube for the cornice We bought a tube in the store 2 m long and 14 mm in diameter, with an internal diameter of 11 mm. Its price was 80 rubles. | |
| Improvised brackets We will use suction cups as brackets. They are sold in the store along with towel hooks and cost 40 rubles apiece. We don't need hooks, so we remove them right away. | |
| We measure and cut the tube. Between the opposite walls we have 171 cm 6 mm. The thickness of the suction cup in working order is 3 mm, so we fold 6 mm across two suction cups and cut the tube to 171 cm with a hacksaw. | |
| Preparing the sucker Step 1 Inside, the diameter of the tube is 11 mm and the diameter of the groove on the suction cup (indicated by the arrow) is also 11 mm. We need to cut off everything unnecessary. | |
| Step 2 Using a knife, cut off only the side of the hat so that the inside fits tightly into the tube. | |
| Step 3 We push the suction cups at both ends of the tube. | |
| Final installation Now we need to slightly moisten the suction cups from the inside, tightly insert a homemade rod between the opposite walls and hang a curtain over it.
|
By shape and design
Taking into account the shape, the following types of bath rods are distinguished:
If we talk about non-standard types, then these are curved models, which are original rods, often made according to individual orders and designer sketches.
Standard bath rods are in turn divided into:
- straight - the most popular type of bath rods, the main advantages of which are their simplicity of appearance, as well as the ability to use a variety of mounting options. Often used for bathrooms of standard shapes;
- semicircular, arc - a curtain holder in the bathroom is used for standard or round shaped rooms. In order for the semicircular arc to be installed, you will need to purchase special fasteners;
- flexible - a flexible frame is ideal for a bathtub with an original shape. Thanks to the possibility of free transformation and bending, the structure can be given completely different shapes. To make a flexible frame, an aluminum profile is used;
- telescopic is a straight curtain rod for the bathroom, the design of which resembles a spyglass. Before starting installation work, the telescopic rod for curtains in the bathroom is extended to the required length and clamped;
- angular - L-shaped arc, requiring additional fixation;
- round - original models of round bath rods, which are used for baths located in the center of the room;
- expander curtain rod - a rod for curtains in the bathroom, mounted from telescopic parts connected by a spring.
Corner bar - when choosing a shape, it is necessary to take into account the shape of the bathtub, shower tray, as well as the shape and dimensions of the bathroom. Also an important factor is the material and type of curtains that are planned to be attached.
Only taking into account these requirements can you decide whether a semicircular arch is suitable for you in the bathroom, or whether it will be an L-shaped crossbar.
Structurally, the rods are divided into:
- sliding and telescopic;
- tension and string.
Materials
Sliding bars can be different not only in length or color. They can be made from different materials:
Metal options look better, but they also weigh more.
If the walls in your bathroom are made of plasterboard, it is better to choose the plastic option. It does not require such strong fixation and puts less pressure on the walls. The risk of damaging the surface is reduced.
For cases where the walls are strong enough, you can choose metal structures. They are attached using the same principle as plastic ones, but require stronger pressure to secure them.
By material
A variety of materials can be used for manufacturing, each of which provides the model with both a number of advantages and a number of disadvantages.
Plastic
The plastic crossbar has a number of undeniable advantages, including:
- low cost;
- availability of choice of colors and textures;
- easy to clean using plain water, soapy water and a soft cloth or sponge;
- practical movement of the curtain on a plastic surface.
The disadvantages of plastic structures include:
- the ability to change the color of the rod over time;
- sagging under the weight of the curtains;
- the need for frequent cleaning due to the accumulation of dirt;
- A plastic stick looks much cheaper than similar options made from other materials.
Metal
Metal models, the material of which can be aluminum or bronze, are a more expensive and practical option, which has a number of advantages over other models:
- resistance to moisture, corrosion, temperature changes;
- lightness of construction and at the same time strength;
- ease of installation;
- durability;
- beautiful appearance that fits perfectly into any interior design.
As for the disadvantages, there are also some and they directly depend on the type of frame metal used - bronze or aluminum:
- aluminum - a stick made of this material has a surface very similar to plaque. The slightest load can lead to deformation of the structure. If you use metal rings to fasten the curtain, this will lead to excessive noise when using the curtain. That is why it is better to choose rings made of aluminum coated with plastic;
- Stainless steel is an expensive and high-quality frame that will last for many years. They are distinguished by high strength and the ability to take the desired shape. If desired, such rods can be finished in silver or gold; bronze is also often found.
Tree
Due to the fact that during manufacturing, wooden rods are impregnated with a special solution, they are not afraid of moisture and perfectly repel water. But even despite this, it is difficult to call this option durable and reliable.
Most often, such models are used for original designs, where practicality is not in the first place; it is then that their spacer and installation are justified.
Combined
Recently, many have given preference to combined models that combine metal and plastic. Often this is a durable metal that is not subject to deformation, which can be bronze, coated on top with plastic or special enamel.
Such rods perfectly combine all the positive qualities of both plastic and metal rods.
Expert opinion
Smirnova Ekaterina Anatolevna
7 years of experience in interior design, professional architect
No less important is the color of the bar, which can be selected depending on the color scheme of the bathroom. Also, if desired, the structure can be decorated with decorative details applied with waterproof paint.
Main features of plastic, metal and combined rods
Curtain rods, depending on the materials used in their manufacture, can differ significantly in their characteristics:
- Plastic rods. They have an excellent appearance, light weight, and quite affordable prices. During the process, they practically do not make any sounds. This is their big advantage, although there are also quite serious disadvantages. For example, over time, such products quickly lose their color and shape. In addition, things made of plastic are not designed for heavy loads, so unless you bought a rod made of special high-strength plastic, do not try to hang heavy curtains on them.
- Metal. These are the most common models, made of stainless steel, brushed aluminum and other metals. They cost an order of magnitude more than plastic ones, but they are more durable, which is why you can hang heavy curtains on them. When purchasing such curtain rods, be sure to pay attention to the rings supplied with them. Metal rings make a lot of noise when moving, and plastic ones are too fragile, so the best option in this case would be to use combined products made of metal-plastic.
Plastic rods have an excellent appearance, light weight, and also quite affordable prices
- Cornices made from combined materials. Typically, such products combine metal and plastic in their design. As a result, they acquire high strength characteristics combined with a low level of noise they emit.
If we consider metal curtain rods separately, then when choosing them, it is imperative to take into account the properties and qualities of the metals from which they are made. For example, aluminum perfectly withstands moisture and chemicals, as well as temperature changes. At the same time, products of this type weigh little, but are very durable, but what is unpleasant about them is their matte surface, which does not look very good against the background of modern finishing materials.
Aluminum perfectly withstands moisture and chemicals, as well as temperature changes
Chromed steel products look great in any interior, and they are very durable. Your children can even hang on them; such curtain rods will not break or bend. In addition, rods of almost any shape and even a cornice for an asymmetrical bathtub can be made from metal, although the cost of such a product can be quite high.
Chromed steel products look great in any interior, and they are very durable
This circumstance is worth keeping in mind when choosing a suitable bath bar.
Mounting methods
When purchasing a rod, in addition to the accessory itself, you receive a set of parts, without which fastening the structure is simply impossible. It is important to know that fastening can be done in one of several possible ways:
Securing the bar yourself is not difficult at all if you follow certain instructions. To do this, you need to assemble the structure together, following the existing assembly diagram, after which you will decide on the location and make marks on the wall or ceiling, depending on the mounting method.
Using a puncher, it is easy to make holes for dowels at the marks. After this, attaching the rod to the ceiling or wall will be a snap.
Advantages and disadvantages
Each of these types of fastening has its own advantages and disadvantages. Any consumer cares about the strength and long service life of the product. An important factor is aesthetics: the choice of model should be based on the overall concept of bathroom design.
A telescope rod is equipment that resembles a stand or small shelf.
Advantages of telescopic rods:
- No complex tools required for installation.
- Length can be adjusted.
- Maintenance is simple and easy.
- A wide range of.
Among the disadvantages, it can be noted that low-quality products can quickly break down and fail. The rods quickly become dirty, collecting dust.
Iron rods are the most durable.
Ceiling models are durable and strong, but require a well-thought-out design. In addition, when installing them, the integrity of the walls is compromised: there is a need for holes for dowels. After dismantling the structure in the room, you need to make cosmetic repairs to the walls.
It is important to consider: the type of fastening depends primarily on the texture of the curtain.
Features of fastening rods of various configurations
To install the rod, you will need special tools, including a drill, a hammer drill, a set of drills, a marking pencil, a screwdriver or a screwdriver.
Straight
Installation of the cornice occurs in several important stages:
- marking the surface to which the frame will be attached. The optimal installation height is 1.6 meters from the bathroom level. If this height is maintained, the curtain falls onto the bathtub by about 20 centimeters, which will prevent water from getting on the floor when taking water procedures;
- using a bracket it is necessary to mark the locations of future holes;
- Having chosen a suitable tool, drill holes, the depth of which should not be less than 4.5 centimeters;
- Usually the rods are supplied with plastic dowels, which are inserted into the holes so that their head extends outward by 0.5 centimeters;
- attach the brackets;
- by loosening the clamping screw, the pipe is placed in the fixed bracket;
- Now you can put on decorative caps.
Telescopic
A telescopic rod can hardly be called a reliable model, which should be abandoned if there are children in the family. An installation of this type has its own nuances:
- Using a pencil, you need to mark the places of future fastenings, making sure that the cornice is always parallel to the edge of the bathtub;
- the unpacked frame must be expanded to the required length, adding about 0.5-1 centimeter;
- Having placed the rings or hooks on the frame, the structure must be installed in the marked place, after which it is worth checking the reliability of the installation.
Corner
Corner structures are often longer than others, and therefore require more reliable fastening. A steel rod will require additional fixation of the corners, which is due to the sufficient weight of the structure.
In this case, we apply the hanging method, when a fastening ring is installed on the frame to fix the corner to the ceiling. Whether it is bronze or plastic, otherwise the installation of such a rod is not much different from the mounting option for the usual straight model.
Semicircular
The semicircular rod is considered a non-standard option, and therefore some problems may arise during its installation if certain rules are not followed. Make sure that the system retreats a couple of centimeters from the edge of the bathtub, and the type of frame must match the material of the selected curtains.
If installation is to be done on tiles, then it is better to entrust this work to specialists.
Otherwise, the installation process is not much different from installing a regular straight rod. The only advice is that at least two people should participate in the installation, which will greatly facilitate the process and avoid injury.
Rod with flanges
A similar curtain rod is attached to the bathroom using self-tapping screws and dowels, which it usually comes with. First, on the surface, it is necessary to mark two places for attaching the flanges, the distance between which should be the length of the curtain rod.
To calculate the height of the rod, you need to subtract 20 centimeters from the length of the curtain.
Having marked the mounting points, you need to remove the flange and make three holes using a hammer drill. After inserting the dowels, the flange is screwed on with self-tapping screws. Such manipulations need to be carried out on both sides of the curtain rod for the bathroom.
Features of installation of cornices
Any models of curtain rods are mounted according to the same principle. The semicircular bathtub cornice is installed in place using ordinary flanges attached to the wall. However, of course, there are some nuances; for example, a U-shaped curtain rod for a bathroom will be mounted at more than two points on the wall.
Measuring diagram for cornice for an asymmetrical bathtub
In any case, to perform the above work, you will need a special tool. This is a hammer drill with drills for tiles or concrete with a diameter of five millimeters, a construction knife, as well as a screwdriver and a hammer. You will also need a square, a pencil, and a tape measure for marking. Also, be sure to prepare fasteners such as screws or dowels. It is worth remembering that such fasteners can be supplied complete with the cornice itself.
Measuring diagram for a cornice for a symmetrical bathtub
It is worth noting that modern cornices are installed in place in three ways:
- to Wall;
- to the ceiling of the room;
- in a universal way.
Let's first consider the installation of this type of rods, such as a telescopic curtain rod for the bathroom. Due to the fact that telescopic models are very unreliable, they are categorically not recommended for installation in homes where there are children, although this type of curtain rods is very common in modern bathroom interiors. The fact is that “telescopes” look modern and stylish, which forces modern women to use them instead of more durable monolithic metal products.
If you bought a telescopic rod, then know that you will only need to mark the place for its installation; you will not need to drill the walls or ceiling. The sequence of actions in this case will be as follows:
- Measure the distance from the ceiling - 15 centimeters. In this case, the edge of the curtain should freely descend into the bathtub, and not be placed above its edge.
- Using a level, locate the mounting location for the cornice and mark it with a marker.
- Check how the telescope mechanism works.
- Please read the instructions that came with the extension bar.
- Extend your cornice to the desired length, adding a little more (0.5-1 centimeter).
- Place hooks or rings on the barbell if they are not removable.
- Reinstall the product and check the reliability of the entire structure.
Naturally, installation without fasteners imposes restrictions on the use of such a structure, so you will have to make sure that your children do not hang on it.
Installation without fasteners imposes restrictions on the use of such a structure, so you will have to ensure that your children do not hang on it
In addition, do not hang heavy curtains on such a rod. If they are necessary, choose other options for their placement that have a more durable fastening.
Wooden cornices
Wood is a wonderful material.
It has high decorative properties and environmental friendliness. These cornices will decorate your bedroom and living room. Its disadvantage is its susceptibility to swelling and deformation when exposed to moisture.
Modern technologies have solved this issue: the use of special processing has made it possible to endow the wood with high resistance to the influence of negative factors. The cornice made from it looks very impressive and rich.
Wooden products are rarely used in the bathroom due to the material's sensitivity to moisture
