Interesting examples of designs and types of doors for the hall

Double hinged interior doors used in the interior of a living room or hall are becoming an increasingly important object of attention for designers - the variety of lines of this type of product is shown in the photo below.

Features of choice

It is recommended to combine the aesthetics of door blocks with their functionality. In this case, not only the characteristics of the material used are important, but also the fastening accessories, as well as the general style of this kit. Even the variety of various hinges should be viewed taking into account the aesthetics of the final product and other accessories. These can be either inconspicuous fastening options or classic ones. If the handle has an intricate decor, then it can be supported with the same looped products. Regarding its design, one should also take into account the issue of safety. It is better to use streamlined variations without sharp corners.

To make the right decision, you can view photos of double interior swing doors to the hall and living room. When choosing, you should pay attention to the surrounding style of furnishings and decoration. It is customary to combine the purchase in color and match the structure of the floor covering. The quality of the materials offered ensures the required level of functionality of the product. Based on these aspects, the pricing of the product is formed. Buyers are advised to invest once in installing a quality product to avoid overpayments in the near future. Buyers should remember that the pursuit of cheapness leads to deformation after just a few years of use.

Options for selecting interior doors

The visual and design characteristics of double doors are a matter of taste for the owner. It is necessary to know a number of important factors on which the comfort, ergonomics, strength and durability of the purchase will depend.

Firstly, sound insulation. The best indicators of this parameter are found in classic swing double-leaf structures.

This factor is important primarily because guest areas, halls, offices, and living rooms involve gatherings of guests, which will create a high level of noise even at the most modest event. And if the hospitable hosts have children, you need to make sure that the soundproofing of the reception room is maximum.

Secondly, the area of ​​the guest room itself. Large spacious rooms with high ceilings do not at all limit the possibilities of choosing a double door design. You can install massive, solid, tall classic oak options, carved, multi-layered, heavy, or choose any design solution using lighter structures. If the area of ​​the room is small, then it is better to install the Japanese version of double doors, which will not hide the space.

Thirdly, the shape and size of the doorway. Engineering standards for openings wider than 120 cm recommend installing double doors. If the opening is large, then it is recommended to install the classic version of swing or sliding doors. It is better not to use folding screen doors for very wide openings. Book doors will look too rough and massive, and accordion doors will look unaesthetic and cheap.

Fourth, installation. The reliability and durability of a double door depends to a large extent not on the quality of the base, but on proper installation, high-quality fittings and fasteners.

Installation must be carried out by professionals, especially if massive double-leaf structures made of natural wood are installed.

Illiterate installation of them can lead to errors that are then difficult to correct even for a master, or to the fact that the doors completely lose functionality. You should take care of the fittings and auxiliary materials for installation first of all, because it will depend on them how long the new doors will remain in need of repairs.

Fifthly, the lighting of the room. In rooms with a lack of natural light, it is better to install structures with transparent inserts. You can use frosted, patterned, or colored glass, which will provide visual isolation without reducing the light. If the doorway is very wide, it is also not recommended to install solid double doors. They will make the space heavier, filling it with unnecessary pathos. It is better to use glass inserts that soften the atmosphere and fill the room with coziness, or install opaque glass doors.

Options for interior doors in the interior

Double (swing)

This modernized version of swinging products is distinguished by the presence of two doors. Accordingly, when opening they are retracted to the sides. This also allows you to gain some space, since the range of classic variations starts from 60 cm.

Sliding (compartment doors)

It provides for the sliding of doors exclusively within the opening boundaries (like a sliding wardrobe). That is, they run at each other. This system is acceptable if the location of the passage made during construction is unsuccessful. It helps to gain back some of the spatial area on the sides.

Accordion door

An alternative to a swing door is a folding version. Schematically, this is an accordion consisting of several folding fragments. When folded, it takes up some space in the opening. Thus, you can easily place some furniture next to it that would interfere with the opening of a standard swinging product.

Single leaf

In this case, we are also talking about a system of some kind of shift, but based on a different principle of operation - recoil. The rollback is carried out using special wheels. Moreover, this equipment is also manufactured in a double-leaf version.

Hidden

Concealment is carried out in different directions. For example, when installing a door in a hidden frame, as well as when purchasing a variation that slides into a false wall. The latter is provided with standard fasteners mounted on top, as well as rails with rollers. The cloth itself can be represented by a variety of materials. The additionally erected structure takes up some room volume.

French

A unique feature of such sets is their aesthetics: light and airy. This is often achieved through the presence of a large amount of glass and light colors. Structurally, they are made in different variations. Often there are two or more doors: swinging open or folding like a book.

Mounted

These are also sliding doors, but designed with visual visibility of the sliding process along the building wall. Unlike secret ones, they do not require an additional cavity. Since hanging occurs using a roller system installed on top, the visually installed products look higher than classic swing ones.

Paneled

The exclusivity of this product is ensured by many elements. Even the simplest door set includes 5 multi-level parts (rising one above the other in a horizontal plane), which allows you to create interesting and bizarre shapes. In this case, a groove connection of all fragments is used.

Classification of double doors

You can’t put ordinary doors in the living room: they simply won’t fit into the space. Doorways in guest rooms are much wider than in living rooms and bedrooms, so double doors are an excellent solution to the design problem of space design. The classifications of such structures are very arbitrary and have a lot of characteristics. First of all, the buyer needs to decide what kind of door he sees in his interior.

Catalogs and online stores are replete with many photos of them with characteristics and descriptions, which can make the task of choosing easier. The photo you see may give you an interesting idea for interior design. Modern production is replete with a variety of materials from which various designs are made today. They can be classified as follows.

1. Veneer, which is a wood material. These are sheets of wood of small thickness (0.5-3 mm), which are used to cover the base - panels made of wood or fiberboard. Veneer is most often made from softwood fibers.
2. Solid wood, which is especially valuable because it is actually lumber of natural wood.
3. Laminated plastic. This high-tech material is used to cover the main panels and is highly durable, wear-resistant and has attractive visual properties.

Standard sizes

The most common sizes: 80 cm by 2 m. However, the width sometimes varies slightly and also includes options of 60, 70 and 90 cm. They may also differ slightly in accordance with the individual characteristics of the housing, determined during the initial construction of the building. This will be considered a custom size.

It is important to distinguish between the concepts of door leaf and opening. The sizes indicated in stores refer specifically to the products sold. It is assumed that the passage itself in the living room should be 8-10 cm wider. This is explained by the fact that it is also planned to install the box and extensions in a comprehensive manner.

Types of double doors

The shape of such a product is the usual rectangular or arched, which is less common. The dimensions of the two convergent parts are presented in different sizes (“one and a half”) or the same design. In the second situation, the smaller part is fixed in one position, while the larger one remains mobile.

By opening type

Two basic functional designs: swing and sliding. In the first case, the fastening to the box is made vertically, and in the second - along the upper part. The extension can be visible or cassette. Simply put, along the wall or into the wall.

According to the material of manufacture

A suitable configuration can be selected from a variety of options promoted on the market, which will differ in price, quality, external image and design functionality. Pure wood, its partial use as veneer, glazing, etc. are applicable here.

Interior double doors: Photo

Home/Articles/Interior double doors: Photos

Spacious apartments with wide openings between rooms are often equipped with double doors. They are selected in accordance with the interior of the premises. Doors improve living comfort by dividing the total area into separate rooms with different purposes. Models are presented on the market in a wide range and differ in finish and requirements for operating conditions.

Thanks to improving technologies and new materials, products with improved properties and high resistance to various types of impact have appeared. Most modern designs have a stylish design. The photo of interior double doors shows popular models and their varieties. They differ in design style, production method, type of locking device and opening system.

Structure of double-leaf doors

Double doors are a prefabricated structure consisting of:

• Platbands;
• Boxes;
• Two mirror-symmetrical canvases.

They are installed in openings whose width, including dimensions with the box, ranges from 1300 to 1900 mm.

Often one of the panels is equipped with special fittings that allow the sash to be fixed to the floor and opened if necessary. In this case, the second canvas is used as a working one. To hang and lock doors, a variety of fittings made of high-quality and reliable metal or plastic are used:

• Loops;
• Pens;
• Locks;
• Latches.

Their shape and finish are selected in accordance with the stylistic design of the room.

Types of models

On the market today you can purchase double doors that have different performance characteristics and differ in quality. The main, most popular products are grouped according to a number of characteristics.

Depending on the size of the opening, the products are:

• Equal-field, consisting of canvases of the same size and type.

• Unequal, when one of the canvases is narrower than the second.

Doors can be made from one type of raw material, that is, from:

• Trees;
• Laminated chipboard;
• Glass;
• MDF;
• Glass;
• Plastic;
• Metal.

Inexpensive laminated double doors made of MDF of different colors in a solid design are sold depending on the manufacturer, at a price of 6,700–9,900 rubles.

Veneered with natural wood of valuable species can be purchased at a price of about 20,000 rubles.

The cost of glass doors is from 15,000 rubles.

Combination models that combine several materials in one product are very popular. They differ in the raw material base, color, texture, finishing, and very often, models are produced in the form of a free-form frame with glass.

A huge number of different combined double-leaf doors are presented in the following video:

Laminated MDF doors with glass inserts can be purchased at a price of 7,000 rubles.

Wooden veneer doors with glass cost about 20,000 rubles.

Interior double doors are classified according to the type of opening, they are:

• Hinged ones, which are attached to the box using hinges and, depending on their type, can have right, left, or pendulum opening.

You can read about interior swing doors here: Interior double-leaf swing doors

• Sliding or sliding, in this case the canvases move horizontally along guides. Such models allow you to create an original design and are suitable even for small rooms where there is no room for swinging doors;

• Folding ones, which are shown in the photo below. This type of door is a type of economy class coupe model. When opened, they fold like a book or an accordion. These samples are especially popular in office spaces, and are also often installed in kitchens, bathrooms, and exits to the terrace;

• Hidden, which are sliding models installed in a special cabinet, inside of which guides are attached, intended for subsequent installation in a wall cavity.

By type of manufacture, doors are divided as follows:

• Mass production. Such samples are usually inexpensive and are produced according to standard classic or modern designs based on standard room sizes and the most popular models. For example, white or natural solid colors are always in demand and never go out of fashion.

• Made to order. In this case, there are no restrictions on sizes, types of finishing, quality of processing and cost of materials.

Based on the design style, the following groups of products can be distinguished:

• Manufactured in accordance with the requirements of classical canons and areas of interior decoration.

• Released in accordance with the requirements of modern design styles - minimalism, hi-tech, modern.

Bifold doors, installed in accordance with the chosen finishing style, are not only beautiful, but also practical and convenient. They allow you to decorate a room, give it a special charm and emphasize the style direction. They are part of the original design, emphasizing the beauty of other interior items.

Types of swing interior doors

The main design principle was laid down initially - plowing. It is produced in the presence of a single canvas, or two sashes. In the latter case, they are most often identical in size. Or the smallest one is fixed, and only the largest one is opened on a permanent basis. However, if desired, the smaller one can also swing open. This variation is applicable only for openings of significant size.

Then it remains to talk about the less significant nuances and characteristics of the materials included in the production, as well as the general style of acquisition and the aesthetics of small details.

Variability of double-leaf interior doors for the hall

Dimensions

The length and height of each order is selected based on individual room criteria. It is better not to rely on the standard structure of many standard apartment buildings (for example, “Brezhnevka” or “Khrushchev”), but to measure everything in fact. Not only the size of the door set itself, but also the extensions and trims will depend on this. Moreover, such a need is revealed in non-standard residential buildings with unusual openings.

Tree

An array consisting of almost 100 percent natural wood has its significant advantages and some relative disadvantages. The quality of execution of such specimens is considered one of the best, which explains the rather high price tag. The main error is the fact that the presented material is subject to temperature changes, so it is better to install it when entering a dry room. The living room is an acceptable option. To ensure successful operation, a new acquisition can be placed in the room for a week without installation to allow it to acclimatize. An excellent option would be the EDGE model from our online store catalog.

It is worth remembering the important function of the new thing - soundproofing properties. The specimens under consideration are characterized by high rates of such. However, a large mass negatively affects the hinges, so it is necessary to carefully select them in order to avoid problems with opening and closing.

Door material

The door leaf for the hall can be made from almost any materials, the most common are the following:

• Glass.
• Wooden.
• Plastic.

The photo shows the interior of a modern room with a white plastic door decorated with a green trim.

Products made from natural wood have a truly elite look and always look very elegant and expensive. Plastic sheets have quality and aesthetic properties that are in no way inferior to wooden models. Glazed doors not only give the room an ultra-modern look, but also make it lighter and airier.

Natural veneer and eco-veneer

Unlike the previous variation, this one is less massive. This is explained by the fact that veneering involves the presence of a thin layer of wood: from a few fractions of a millimeter to a centimeter. To understand the class of such doors, you can compare them not only with solid wood ones, but also with the most budget laminated ones. As a result, they will occupy an average position between the indicated alternatives. The manufacturing technology is similar to lamination. A thin film is also applied here, but it no longer consists of a laminate, but of a strong eco-friendly material.

In terms of price, they are also in the middle place. At the same time, they are described as fairly light in weight and without the expected possibility of deformation. Accordingly, as a rule, there are no difficulties in further operation. However, it is worth considering that the noise insulation here is lower than in the previous case.

Metal

Metallized doors usually serve as external doors for exiting an apartment or private house. Nevertheless, modern trends, namely hi-tech and minimalism styles, allow them to be used for indoor installation. Such products are distinguished by clear lines and have perfect sound insulation. For such options, you should carefully select fittings in order to achieve an aesthetic complement in style and a good fit in the doorway. Sometimes you can find a combination of materials. For example, wood + metal inserts.

Plastic

This designation of the composition is not entirely clear to the consumer. In fact, these are PVC doors known to many. They lack a natural base and the same exterior finish. The coating is presented in the form of laminating films. Such products have their pros and cons. The first mainly refers to the low price of the product. Nevertheless, it is explained by its quality, since there is practically no soundproofing functionality, and the design itself deteriorates faster than others.

Glass

Usually it is assumed that partial use of glazing in a wooden base is required. The area occupied by glass can be quite large, which visually creates the impression of a completely glass specimen. The latter also occur, but are extremely rare. The advantage here is primarily the attractiveness of such interior items. But it’s worth objectively perceiving all the nuances of their operation.

Sound insulation in this case is not the highest, so this option is suitable for people who mainly strive for aesthetics. In addition, such an ensemble is quite fragile and therefore dangerous. Functionally, it requires careful handling. However, the prices for this variation are not so modest.

Materials for production

Considering the fact that double-leaf doors are more complex in terms of operation and assembly, special attention is paid to both the materials for manufacturing the product and the fittings. How the doors will look in the interior and how long they will serve their owners without breakdowns or annoying malfunctions depends on what and how all the structural elements are made of. Let's look at the most popular options.

Tree

Wooden attributes in the house are always appropriate. Wood is an environmentally friendly material that looks beautiful and gives the entire interior a certain sophistication and charm.

Typically, interior doors are made from wood, and more practical and durable analogues (metal, for example) are used as material for entrance structures. Valuable wood species have a beautiful texture, natural texture, and are valued because of their colors. Sliding bi-fold doors made of wood are quite expensive, but the price is well justified when you consider how durable and strong they are.

MDF

MDF is a material that, due to its low cost and attractive practicality, has become more popular than wood. This is an excellent alternative to expensive and not always affordable wooden models.

More expensive designs consist entirely of MDF panels. Budget analogues differ in that the internal filling, as a rule, is represented by cellular cardboard or materials that are similar in their functional qualities.

The price may also be affected by appearance. For example, double-leaf glass doors made of MDF base and sandblasted decor will cost an order of magnitude more than just entrance doors to an apartment with a laconic design.

Plastic

Plastic doors, usually characterized by their miniature dimensions and simple operation, are used in office buildings, on balconies, and also in rooms with high humidity. Plastic can have a detrimental effect on the interior composition as a whole, reducing its cost.

However, this is the cheapest and most versatile option for locations such as a balcony or bathroom. Constantly high air humidity will have a detrimental effect on respectable wood, but plastic products are not “afraid” of such inconveniences.

Entrance doors are almost never made of plastic. This is, first of all, a practical element. Where aesthetics are important, and this is the interior space, it is better to use other materials. An exception is made if the interior design requires the use of light and simple materials.

For example, double-leaf PVC doors to the kitchen are used to add asceticism and conciseness to the atmosphere. Another option when lightweight plastic is in favor is the need to decorate a large doorway in a room with high ceilings. The arched door is also ennobled in the same way.

Metal

Metal double-leaf doors in interior structures are used only in combination with other materials (for example, glass). Manufacturers prefer to use lightweight and inexpensive aluminum or practical and versatile stainless steel.

Entrance metal steel doors are an ideal option for creating a real fortress. Such a “reservation” will protect the apartment or house from any unwanted visits.

Glass

The material is not used as a monoelement. Usually MDF, wood and plastic are combined with transparent inserts. It is much less common to combine iron and glass parts.

For ultra-modern living rooms, decorated in a futuristic style or progressive modern style, it is possible to introduce all-glass structures into the composition. However, the material for the manufacture of such structures must be special: ultra-strong and not afraid of mechanical damage.

Double-leaf glass entrance doors can be found in expensive office and shopping centers. There cannot be such attributes in a private house or apartment.

Advantages and disadvantages of double doors

All weaknesses are mitigated by carefully selected materials and purchasing from an experienced company.

How to choose?

When choosing a door to the hall, you need to be guided by the following rules:

• Remember that you want an elegant door. Don't neglect designs with pictures. If they don’t fit into the interior of your home at all, pay attention to models with simple asymmetrical inserts. They look interesting, while being a universal option.
• Decide in advance on the door system you need. Sliding doors require initial planning at the design stage, swing doors require sufficient free space, and folding options are often not suitable due to a certain interior style. Having decided what you want to get in the end, you will choose what you need much faster and more correctly.

• The hall is the “mirror” of the house and it is important that the frame of the entrance to it looks decent. Choose high-quality materials from which the door and door frame are made, since this largely determines the appearance of the structure some time after the start of operation.
• Double-leaf structures are an ideal option for a living room, and if there is an option to install just such a model, feel free to choose a sample with two doors. Despite the existing variety of single doors, none of them can fully replace the solemnity of a double-leaf one.

Color of interior double doors for the hall

The defining parameter of the selected specimen largely depends on the palette prevailing in the room and the personal preferences of the clientele.

Wenge

The use of dark colors in the interior should always be done with an eye on the overall square footage of the home and the likelihood of its visual reduction or expansion. Living rooms are usually connected to small corridors. If you intend to use darkened shades, you need to correctly place design accents in the surrounding space.

Brown

One of the most popular color schemes, which is often found in classic style or modern veneer. The obvious warmth of this color requires its use in an environment in which there are no obvious cold distortions.

Beige

Perhaps this idea is one of the most common, along with the previous one. There are a lot of different shades of this type of painting. Up to gray-beige. Moreover, when simulating a wooden covering, tints of tint are revealed here, which expands the possibilities for installation and combination with furniture and decoration.

Grey

Depending on the color characteristics and their depth, such a solution will complement a dull interior or somewhat calm down a deliberately pretentious one. In terms of style, such a product is well suited to high-tech or minimalism, as well as modern.

Black

The styles indicated in the previous version combine well with this color. Recommendations for its use will be approximately the same as with wenge. Such dark materials will not fit into every apartment. However, with a successful design solution, they will maintain the overall style.

In which interior are swing interior double doors most relevant?

This design move is definitely suitable for living spaces of different sizes and the schematic placement of the opening in the wall. The latter may be located near one of the corners of the room or moved closer to the middle during construction. In any case, small swinging doors allow you to significantly save space and place furniture in close proximity to the installed product.

The door sets under discussion support all currently available stylistic solutions for an apartment, residential apartment or private house.

Photos of the hall in different styles

Modern

Classic

High tech

Modern

Provence