There's one smart way to add a luxurious look to patterned tiles on your home's threshold without having to re-tile your front porch. This is a ceramic tile rug that looks very nice and can really brighten up the area near your front door. Plus, this project is a great way to learn how to lay tile.
If you follow home design publications or read decorating magazines, then you probably know that patterned tiles are widely used in this area. Concrete tiles and ceramic mosaics are very fashionable trends and seem to be popping up in many kitchens and bathrooms right now. A lot of people love tiling, but few people know how difficult it is to remove it if necessary. This option allows you to change the appearance of the porch without additional repair work. And if you get tired of the look of the tiles on your porch, you can easily remove this rug and change the look of the space.
This is a way to incorporate fun patterned tiles into your home without being tied to a design trend that might fade in a couple of years.
DIY tile rug
Necessary materials:
- a small sheet of drywall;
- ceramic tile;
- wooden plank for frame;
- universal cement;
- grout solution;
- construction adhesive;
- tile spacers;
- spray paint.
Required tools:
- steel spatula;
- sponge for removing grout from tiles;
- sponge for grouting;
- bucket;
- roulette;
- a circular saw;
- an angle grinder with a stone wheel or utility knife;
- clips or masking tape.
Preparatory work
The first step is to measure the ceramic tiles and determine what size your rug will be, as well as what parameters the plasterboard on which it will be laid should have.
The Voice of War and Victory: how did Levitan’s great-grandson grow up and did he follow in his footsteps?
The hunter experienced the most exciting journey at the age of 92: he got lost in the forest
Dream catch: a man was able to pull out a huge carp while fishing (photo)
In addition to this, you will also have to account for the grout lines between the tiles and around the perimeter. Six 18cm ceramic tiles were used in this project. Including grout lines, the overall dimensions were 62cm x 42cm.
Bath mat color
The choice of bathroom flooring color depends on the size of the room, its finish, and your personal preferences.
In rooms with a predominance of turquoise, white, and dark tones, paths of beige, brown, dark blue and gray colors are suitable. To make the interior more harmonious, other accessories, such as towels and soap dishes, can be chosen in the same color as the rug.
But paths in bright lilac, red, green tones are suitable for rooms with brown, orange, and beige colors.
When choosing the color of the rug, it is important to remember that:
- You should not buy white tracks. With intensive use, this option can quickly lose its whiteness.
- When purchasing coverings for placement near the toilet, sink and bathtub, it is advisable to choose options of the same color and texture.
- A poorly dyed rug may lose its color after the first wash. If possible, check the quality of the paint before purchasing.
Modern manufacturers also offer flooring models that change color upon contact with water. If you can't decide on one specific color, you might like this option.
In order to check the quality of the paint, you should run a damp hand over the pile; if there are traces of coloring on your hand, then this option is not of high quality and will quickly lose its color.
Cutting drywall panel
At this stage you need to cut out the base for the rug. To do this, take a plasterboard slab and cut it, based on the parameters you calculated earlier. For these purposes, you can use an angle grinder with a stone wheel. Another option is to use a straight and utility knife. Cut the slab using firm pressure and then hit it on a flat surface, such as a workbench. This way you can separate the drywall without damage and with a minimum number of tools.
Customer reviews about soft tiles
Despite their recent appearance on the market, modular carpets have already received quite a large number of comments on the Internet. Reviews about carpet tiles are mixed.
A large number of owners of such coatings note their attractiveness and comfort. Residents of private houses and apartments on the first floors especially loved soft tiles. Its presence made it possible to make cold floors very warm and silent.
Many people focus on the simplicity of laying materials. Buyers appreciate the opportunity to decorate their home with their own hands.
Some people consider the cost of such products to be overpriced, so they prefer the usual carpet. Lovers of natural materials criticize the presence of synthetic fibers on the front side of the slab.
Despite skeptical consumers, many netizens express interest in this type of finish. Indeed, it allows everyone to show their imagination and diversify the interior. If you choose not the most expensive options, then a modular carpet will not be so expensive. However, its durability and practicality will not change.
Manufacturing of parts for a wooden frame
At this point, use the dimensions of your drywall panel to determine the length of the wood frame. Based on these parameters, cut the parts for the wooden frame. To do this, set the saw angle to 45 degrees and place the fence vertically on the saw. Cut two pieces 42 cm long (short end to short end) and two pieces 62 cm long (short end to short end).
A designer friend told me the basic rules for choosing beautiful curtains for your home
How to turn popsicle sticks into handy toaster tongs
For the first time in a long time, Yulia Menshova showed what her children look like: new photo
Attaching a Wood Frame to a Drywall Panel
To attach the frame to the drywall, you will need a strong construction adhesive. Apply a thick bead of glue along the bottom edge of the short side of the scraps and along the surface of the beveled corners. Then do the same with the long pieces. Attach the frame to the board and make sure the corners are aligned. While the glue is dry, secure the frame with clamps to ensure a tight fit. If you don't have clamps, you can use masking tape or tie down straps. Now let the frame dry completely before you can remove the clamps.
Pouring cement
Carefully read the instructions on the packaging of the cement you choose. The fact is that there are different brands and depending on this, the instructions may change. Then mix all-purpose concrete according to the directions on the box. Make sure the solution is well mixed and there are no lumps. Cement sets very quickly, so you should make sure that all materials are at hand in advance. Now apply an even layer of cement inside the frame, about 2cm thick.
The taste of rhubarb and meringue pie is impossible to forget: the sourness makes it special
Rolled down the steps backstage: interesting excerpts from a new book about Magomayev
12 years ago, two young Belarusians won the Green Card lottery and moved to the USA
Advantages of carpet tiles over other coverings
Tiled carpet has many wonderful properties, thanks to which buyers are increasingly choosing it when purchasing floor coverings.
Due to its compact size, the tiles are convenient for transportation. You can save on shipping costs, as it will easily fit into a passenger car.
It can be dismantled and reused elsewhere.
Even those new to renovation and construction work can handle laying carpet tiles. Even in rooms with complex geometry you can easily do without assistants. Small squares are easier to lay than heavy, solid pieces.
There is no need to overpay for the amount of purchased material in excess of what is necessary, taking into account the waste when cutting the fabric.
As mentioned above, damaged areas of tile carpet can be easily replaced, especially if you take care of a supply of material in advance.
The material does not fade in the sun, is wear-resistant, and easy to clean. Thanks to the variety of colors and textures, it allows you to create unique design projects.
Modern apartments have a huge number of wires, which are very convenient to hide under the floor covering. The tiles allow you to get quick and convenient access to them if necessary.
Floors covered with such tiles are easy to care for, since the pile is treated with an impregnation that has antistatic properties and repels dirt. It is resistant to abrasion, and dents from furniture legs are easily restored after removing the source of the load.
Conscientious manufacturers monitor the environmental friendliness and safety of products for human health, having all the necessary quality certificates.
The only disadvantage of carpet tiles is their higher cost compared to regular carpet.
Laying tiles
During installation, it is recommended to act quickly, but be very careful. Place the tiles inside the frame, pushing each one into place. You can use a piece of 5mm plywood as a spacer, but special tile crosses will ensure you have perfectly placed grout lines. Lay the tiles one by one, starting at the top corner and working downwards. Then fill the top row to the right corner. This will ensure that the tiles are evenly distributed throughout the area of the mat. Continue filling the mat with tiles until they are all laid.
How are they laid?
The installation process of this flooring is extremely simple. The following tools will be required:
- ruler;
- roulette;
- scissors;
- construction knife;
- beat;
- glue (selected taking into account the roughness of the floor)
Work technology:
- Prepare the base: clean and level, filling all uneven areas and cracks.
- Apply markings using a bevel - two crosswise intersecting lines parallel to the walls.
- Lay the tile on the surface with the wrong side up and let it rest for about a day.
- Carry out a clean installation, fixing the parts with special glue or double-sided tape.
- Trim the edges of the tiles along the walls and attach the baseboard.
Important: installation must begin from the center of the room.
Periodically it is necessary to stop and use tools to check the parallelism and perpendicularity of the laid out fragments of the floor covering in order to re-glue the incorrectly laid out areas in time. It is also necessary to monitor the direction of the pile. By the way, you can experiment and create an unusual pattern, thanks to the different directions of the threads of the top layer. It is more convenient to make cuts from the wrong side.
In small rooms with low traffic, you can lay carpet tiles without fixing them with glue.
Grout
Before you start grouting, you need to let the concrete dry for several hours. After this you can mix the solution.
There are different grout options, which may also differ in color. For this project, a shade called “natural gray” was chosen. It fully matched the color scheme of the tiles and fit very organically into the overall look and design of the product.
Sweet snack in a hurry: make cake pops from honey and peanut cookies
A hotel in England sheltered a man for free, and he repaid the kindness.
Cranberries, persimmons and bourbon: preparing sweet sauce for pancakes and pancakes
As with cement, it is recommended that you follow the instructions on the container when using the mixture. Try to work carefully and carefully when applying the solution and wiping off any remaining residue. Once the job is done, make sure that there are no traces of grout on the tiles and that you have cleaned them thoroughly. The solution should only be in the spaces between the tiles. Let the composition dry well.
What should be the ideal bath mat?
To ensure that the rug you choose does not cause you even more trouble and problems, it is important to highlight some features that it should have:
- Presence of anti-slip elements . This is necessary to ensure that the coating does not slip on a wet floor. Various manufacturers offer options with special suction cups, latex and rubber bases, which ensure reliable placement of the coating on a wet floor.
- Moisture resistance and breathability . The bathroom flooring must dry quickly, otherwise fungus may form on it. It quickly spreads around the perimeter of the room, and most importantly, it can cause many diseases.
- Resistance to high and low temperatures. Poor-quality coating, which is not intended for use in conditions of high humidity and temperature changes, can quickly deform.
- Easy to use . A rug is necessary to ensure comfort in the bathroom, and therefore should not cause much trouble to the owner. It should be easy to clean from various contaminants and dry quickly.
- Fits into bathroom design . The coating should fit harmoniously into the interior of the room.
Once you have decided on the features of your ideal rug, you can begin to consider existing options. The range of flooring for showers is huge. There are several criteria that you should pay attention to: material, size, shape, color.
The final stage in creating a tiled rug
The next day, once the grout has completely dried, you can place your new tile mat outside your front door. This way you will get a beautiful fashionable element made according to the latest trends in the form of tiles. To decorate your porch, you don't have to spend a lot of money or stick to standard solutions that you see everywhere.
Making this tile rug with your own hands is not difficult at all. This project doesn't take long and can be done over the weekend. If you're planning on tackling other areas of your home, this would be a great project to practice before committing to anything big and a big investment.
This new tile rug is very durable and will withstand anything Mother Nature or your kids throw at it. It is also easy to clean and does not require special care.
Found a violation? Report content
Design Tips
When designing your future tile floor panel, you need to take into account several important points:
- determine the size of the area that the drawing will occupy;
- choose the color and design of the pattern in accordance with the general style of the interior of the room;
- select light sources that will illuminate the area of the floor with a pattern;
- prepare the base for laying tiles;
- determine the maximum height to which the floor can be raised;
- determine the load that will affect the floor covering.
See the next video for more details.
