Barrel sauna – pros and cons, different types of design, how to choose the right design?

Reviews about the advantages

The barrel bath, reviews of which you can read in the article, has, according to consumers, many advantages.
Among them, it should be revealed that this design is superior to its rectangular counterparts, because there are no corners inside the steam room, so there is no possibility of getting hurt, and the hot air will circulate in a circle without going anywhere. In order to warm up a bathhouse in winter, according to consumers, only 2 heatings are enough. Another advantage is the attractive appearance of such a building, which will not leave your guests indifferent. Many people choose such baths taking this factor into account. After all, it is simply impossible to pass by such a steam room. Another important advantage is the affordable cost. Many consumers note that they make choices based on price. Today, when everyone is trying to save money, it is not always possible to make an expensive purchase.

A barrel sauna, reviews of which should help you make the right choice, will be cheap, and in terms of functionality it will not be inferior to a full-fledged steam room. Such bath complexes appeared on the market of relevant products relatively recently, but they have already become a favorite among bathhouse attendants. Round buildings can fit into any landscape.

They are compact, making them easy to transport. From this, according to consumers, comes another advantage, which is expressed in the fact that a bathhouse of this type can be transported from place to place. This is especially true if, after using it at your summer cottage, you decide to install the same bathhouse on the territory of your private house within the city. All of the above advantages, according to buyers, are successfully combined with the functional qualities of the building.

The barrel bath, reviews of which will be useful to read before going to the store, also has many additional advantages. Among them, ergonomics and efficiency should be highlighted. Such buildings are easy to warm up, and the heat inside lingers longer, because the design has the effect of a thermos, as well as the properties of natural wood.

According to buyers, the savings on fuel are quite impressive. A transportable bathhouse can easily be heated even in severe frosts, and the time of the bathhouse attendants is saved, which is why such structures are considered specially created for the harsh winters of Russia.

If you want to move from one house to another, you can take your favorite bathhouse with you. Today, several models of such buildings are known; they differ from each other in the following factors:

  • material of manufacture;
  • appearance;
  • planning;
  • dimensions.

We suggest you familiarize yourself with: Draining and draining water in a bathhouse: how to do it yourself, methods and design of the system
The barrel bathhouse, reviews of which often help consumers, is a very convenient structure, because it is supplied assembled. According to buyers, installation does not take too much time. There will be no construction work on the site. This indicates that the bathhouse can be installed on a completed landscape; the design will not damage plants and decorative elements, and will not damage aesthetic beauty.

Depending on the size of your site, you can choose a bathhouse for a certain number of steamers. Consumers emphasize that if the budget is insufficient, you can choose the smallest option - economy. It is also suitable for a family of two or three people.

You can use the interior space as efficiently as possible, because there are no corners. Consumers emphasize that it will be possible to install a wood-burning or electric stove. It all depends on what kind of steam you want - wet or dry. Buyers also like the fact that with the help of such a structure they can decorate any area.

There is no need to make a foundation; to do this, it will be enough to equip a flat surface that will prevent contact of wood with the soil. The barrel sauna, customer reviews of which are presented in the article should help you make your choice, can be installed on a surface paved with paving slabs or lined with gravel or concrete. If there is no such area, then the concrete base can be poured yourself.

For this purpose, the consumer is advised to remove the soil 20 cm deep, install formwork, and then fill in the sand cushion. Next, the reinforcement is laid, and the space is filled with concrete. It is necessary to leave it in this state for 3 weeks, after which consumers are advised to begin installing the bathhouse.

How to make a barrel sauna?

The barrel bath project is quite simple, anyone can turn it into reality. But first, it’s worth thoroughly studying all the information about the construction of such a mini-bath.

The first step in building a barrel sauna is to think about the material from which it will consist. Properly selected wood will improve the quality of the bath many times over. The most suitable tree is cedar, despite its cost.

All materials simply must be of high quality, this will help extend the service life for many years. The boards must be of different thicknesses; the side boards will differ significantly from the floor boards. The mini-bath must be completely sealed, so when installing windows and doors, pay special attention to this. The entire bathhouse will have to be covered with iron strips around the edges; they will help hold the boards and will also clearly resemble a barrel.

A wood-burning stove is installed inside; a chimney, which is a metal pipe, will need to be removed from it. To furnish the interior you will need boards, but a little thinner. You can use them to build benches and a fence for the stove.

Barrel baths with a shower and toilet are a little more complicated to build; you will have to make a drainage system, and build the toilet according to the principle of a dry closet.

Main disadvantages and reviews about them

Before purchasing a bathhouse that looks like a barrel, you should pay attention to its disadvantages. They will allow you to decide whether you need such a design. Among the disadvantages, consumers highlight the higher cost compared to a summer cottage bathhouse. You can purchase the last of the mentioned structures for an average of 150,000 rubles, while a barrel sauna can cost as much as a two-story timber building. In this case we are talking about a structure made of Canadian cedar.

Before making a purchase, you need to read reviews about the barrel sauna, the disadvantages of which may put you off. Another disadvantage consumers consider is that in winter it is difficult to ventilate the interior space. If the water is not drained on time, it will flow out, which will contribute to the accumulation of liquid in the area.

Before making a choice, you should definitely read the reviews of the owners about the barrel sauna. Having familiarized yourself with them, you can understand that the capacity of such a design is small. Only two people will be comfortable inside; 4 people can fit there, but they will feel very cramped.

We invite you to familiarize yourself with: Grouting tiles technical specifications

No. 5. Form

The standard shape of a barrel sauna is round, hence the name, but some manufacturers offer their own variations. The most popular forms are:

  • round barrel sauna - the standard and most common option. It looks original, requires a small area for installation, and warms up quickly;

  • an oval (elliptical) barrel sauna does not take up much more space on the site, but at the same time the internal usable space increases significantly, and the steam room warms up almost as quickly as in a round barrel;
  • A square, or more precisely semi-circular-semi-square , barrel sauna in cross-section looks like a square with rounded corners. It has the largest usable area among other buildings; here you can comfortably place more benches, tables, shelves, etc. The room warms up relatively quickly. Such a bathhouse will look great on the site.

Reviews about space and safety

According to buyers, barrel-shaped baths already have limited free space, which becomes even smaller after installing a heating device. You can choose it yourself. Sometimes suppliers offer bath complexes with ready-made stoves. It is also important to take into account that when operating such a structure, it will be necessary to observe increased safety measures, because the risk of a fire in a confined space increases several times. And steamers no longer have the opportunity to get burned on the hot stove walls.

Main types

After making the decision to build a barrel sauna on the site, one serious problem arises: which version of the round structure to choose. All varieties can be divided into three main groups:

  1. Finnish sauna . Its features are high temperature and dry steam. It is preferable that during paired procedures, the person in the bath should have a font or wooden bucket with cold water nearby.
  2. Russian steam room . The steam room creates moist, thick steam, and brooms are used for the procedures. Typically, such a structure has two rooms: a washing room and a steam room.
  3. Japanese ofuro . It looks like a regular bathtub made of wood. It is heated thanks to a stove built into the structure.

Each type of round bath has nuances of design and construction. You should be guided by them when choosing a suitable design. For supporters of traditional procedures, it is best to choose the option of building a building with a traditional “heater”.

Reviews about installation features

After reading reviews from owners about the barrel sauna, you can understand that it has many advantages. Buyers claim that the structures are light in weight, and therefore do not require the installation of a capital buried foundation. In order to carry out the installation, it will be necessary to prepare the site by leveling it and ensuring the hardness of the coating. It should be strong enough.

Reviews about the barrel sauna in winter are very positive. Buyers claim that the small size of the steam room makes it possible to quickly warm up the room. Compact dimensions have another advantage, which is expressed in the fact that the structure can be accommodated even in a small area. You can assemble and disassemble the structure yourself in the shortest possible time. This allows installation and dismantling without special equipment, using only the strength of your hands.

When looking at barrel baths, photos and reviews about them, you should definitely take them into account, because this information allows you to understand which design to prefer. Buyers quite often prefer the structures described, but, according to them, they have some disadvantages.

For example, for use in winter, the walls will have to be insulated to make use comfortable. Insulation is carried out using roll materials, which entails additional costs. But you can do the procedures yourself. You can purchase the structure in insulated form. From this it follows that it will hold the temperature well, but will cost more.

If you want to install the barrel yourself, you will need to prepare a tongue-and-groove profiled board, the thickness of which is 45 mm. You will need window and door fittings, a cutting board, metal hoops and a stove.

An alternative solution is to purchase a bath set and assemble it yourself. The size can be absolutely any. This approach allows you to reduce the time for assembling the structure. To construct the frame, it is better to use coniferous or deciduous wood. According to consumers, they are ideal for working inside.

We suggest you familiarize yourself with: Pool heating solar collectors

Discharge of wastewater from the bathhouse

Since a large amount of dirty water will form in a bathhouse with a washing room, it must be properly drained. If you use the bathhouse infrequently, you can get by with a hole in the floor. However, this method is not suitable for intensive use of a barrel bath, since excess moisture under the structure will lead to the appearance of fungus, rotting and damage to the floor, and an unpleasant odor.

Therefore, initially the bathhouse is installed at a slope towards the drainage hole connected to the pipe through which the waste goes into the drainage pit. This pipe should be carefully insulated so that in winter it does not crack and the water in it does not freeze.

Cost of baths in Samara. Reviews

Reviews about the barrel bath in Samara help many residents of this city. After reading them, you will be able to understand that you can purchase such a design at a price of 90,000 rubles. The length of the structure is 2 m, the diameter is 2.1 m. The length of the steam room is 1.8 m. This bathhouse has one section and weighs 680 kg. It is designed for 2-4 people.

If you want to buy a barrel sauna for your dacha in Samara, you should definitely read the reviews about it. Among other market offers is a design with a length of 3 m. You will have to pay 120,000 rubles for it. The length and diameter are 3 m and 2.1 m respectively. This structure has 2 sections, and the length of the steam room is 1.8 m.

Consumers like that this design has a locker room. The sauna weighs 950 kg, so it must be installed on a solid foundation. Consumers emphasize that this design is already designed for 4 people, like the bathhouse, the length of which is 3.5 m. The diameter remains the same, but the length increases to 3 m. The steam room has a length of 1.8 m.

By reading reviews from real customers about barrel saunas, you will be able to understand that such structures can be designed for a larger number of people. For example, 6 steamers can fit in the 4th barrel for 155,000 rubles. The length of the structure is 4 m, the number of sections is the same. There is also a rest room in this project. The complex weighs 1180 kg.

Like the wood, so is the chip from it.

The choice of material will be the first thing you encounter. If, when building an ordinary bathhouse, you can choose almost any material as the basis, because only the inner lining matters, then for a barrel bathhouse you can only use wood. Thanks to this natural “filling” in the barrel bath, an additional aromatherapy effect is achieved: the vapors are mixed with woody spirit, which has a beneficial effect on the skin and upper respiratory tract. The most popular types of wood are:

  • Linden retains heat for a long time, and its wood is known for its healing effects on the respiratory system. But this type of wood has one serious disadvantage: it does not withstand moisture well, which means the barrel will not last long.
  • The strength of oak boards has long been the talk of the town. An oak bath not only does not react to the effects of steam, but also becomes stronger from it. Oak bark and wood are considered a natural antiseptic, which makes it possible to treat dermatological diseases and inflammation of the respiratory tract in such a bath. True, this material is expensive, but a bathhouse made from it will be installed, as they say, for many years.
  • Another popular material is cedar. This wood will also cost a pretty penny, but it is durable. Cedar boards do not sag, hold temperature well and create a special aroma bath effect, thanks to the tart smell of pine needles. From an aesthetic point of view, the patterns on the wood from the frame are some of the most ornate and beautiful.
  • Aspen can also be considered as an option. Moreover, prices for this type of wood are among the most affordable. It withstands moisture well and will last a long time.


Transportation of the bathhouse

Tip: cedar is the only exception from coniferous wood, which is recommended for use as a material for a barrel bath. Coniferous wood contains a high concentration of resins, which, during heat treatment, tend to melt and release to the surface. The aesthetic appearance of the bathhouse from the inside will be hopelessly ruined.

Recommendations from home craftsmen

Grooves are prepared in the upper part of the board, which should repeat the shape of the bathhouse. Home craftsmen advise using support boards, which are located at the same distance at the bottom of the barrel and are connected to each other. As soon as it is possible to form a circle where the end walls can be attached, they are placed in a certain place and boards are laid out until the barrel takes on a rounded shape. This system should be secured with metal hoops and window and door accessories installed.

Tags: bathhouse, barrel, minus, operation

« Previous entry

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]