Hallway seat: modern design ideas and storage options

0
28592

Decorating narrow spaces is not as easy as it might seem. Not every person without design skills will be able to rationally plan the space of a narrow corridor. We invite you to find out how useful, functional and convenient a shoe cabinet with a seat in the hallway can be, what are the features of its selection and placement.

Pouf, bench, ottoman

Ottomans are, as a rule, quite small in size, and the banquette can be two- or three-seater (in this case it is usually called an “ottoman”). The disadvantage of these pieces of furniture is their low height. Sitting down on them to put on your shoes is simply inconvenient.

If there is not enough space in the hallway, it is better to purchase a model on wheels and slide it, for example, under a narrow console table.

Pouf and ottoman

If the sofa and armchair are too large for the hallway, you can choose a pouf or ottoman. They are smaller in size, but no less attractive and comfortable. Due to its length, the ottoman can accommodate several people, this is its advantage over single-seat poufs, but the latter can be used in the amount of two or three, and if necessary, more. Upholstery material must be chosen carefully, as it can wear out quickly on such furniture.

jamesisrunning.com

1/3

heliconia.com.au

2/3

ikea-club.org

3/3

Bench

This seat is suitable for a relatively spacious hallway. A standard bench without additional parts, shelves and drawers looks very nice and cozy. If the top of the bench is hard, you can supplement it with pillows, a blanket, a fur or knitted rug.

What are the main features

Finding similar furniture will not be difficult in almost any city, be it Moscow, St. Petersburg, Nizhny Novgorod, Yekaterinburg or Bryansk.

Plus, stores like Ikea allow you to place online orders with delivery anywhere in the country. Therefore, first of all, we will study the main nuances of choice in order to simplify your task of buying a shoe rack.

Such furniture for the hallway has its own characteristics. Just don’t confuse the shoe rack with the shoe racks that we talked about earlier. Shoe racks can be safely called:

Bench with storage

A bench with storage underneath the seat is a more practical solution.

Instead of traditional furniture boxes, wicker or plastic storage boxes that match the size of the sections can be used.

By the way, you can use a narrow rack as such a bench. For example, Expedit from Ikea.

However, a similar model can be ordered from any furniture company. This is the best option, because a custom-made seat will ideally fit into the interior of the hallway not only in color and design, but also in size. Boxes can be purchased in advance - the sections will exactly match them. This is exactly the case about which we can say: “tail to neck.”

Hanger-seat

For small hallways, a hanger with a seat would be a good solution: it does not take up much space and is quite functional. A frame made of metal pipes has an advantage over wooden ones in terms of strength and elegance, especially since metal hooks will hold tightly. The shelf under the seat can be used as a shoe rack, just be sure to carefully choose the material from which this shelf will be made so that it does not deform in wet weather.

Photo: theclassyhome.com

Cabinet seat

Buy a regular cabinet of suitable height. Her tabletop becomes a seat. To make it more comfortable, you can sew a mattress with a beautiful cover. This piece of furniture will successfully perform two functions at once.

Advantages and disadvantages of reclining seats

The pros and cons of the product are interconnected and are flip sides of each other.

Flaws:

The device cannot be moved quickly. To do this, it is necessary to dismantle and then reinstall the chair, but in a different place.
Complexity of design, which means less reliability compared to traditional furniture.
A rigid binding does not allow you to “adjust” the seat, that is, move it or turn it to make it more comfortable.
It is an integral part of the design of the room, is clearly visible, and therefore requires a thoughtful location.

The disadvantages cannot be eliminated, since they are based on the design principle itself.

The main and only advantage lies in the very idea of a folding chair: it takes up space only when it is needed. Then the seat is pressed against the wall (partition, column) and practically disappears.

Built-in seat

If there is an alcove in the hallway (architectural or created by furniture), why not build a bench into it? This can be a stationary structure assembled from plywood, or furniture ordered by size. This solution looks very aesthetically pleasing and “pedantic” thanks to the meticulously verified design.

Seat with storage baskets

An easy to implement idea for hallway seating is a bench with storage baskets underneath. This interior element is beautiful because it has many design options, it can be of any length, the seats can be made of any material: either wood or fabric, and the baskets can be round or square, wooden or metal. By the way, the baskets can be labeled with the names of each family member, so that children always know where to leave their shoes, and adults do not forget to keep things in one place.

theviralmesh.com

1/3

xogoldcup.com

2/3

treyandlucy.blogspot.com

3/3

Seat in the closet

If you plan to equip the hallway, lobby or corridor with a large closet, you can leave a niche in it for a soft seat.

This is an original and very profitable solution that allows you to place both spacious storage and a comfortable built-in sofa in a small area.

The walls of the niche are also often made soft with quilted upholstery.

Seat cost

The price of products directly depends on the complexity of execution, materials used, and build quality. Even the simplest device in design can cost an order of magnitude more than a more sophisticated one:

A decent folding chair for installation in places where high loads are not expected and special operating conditions are not expected can be purchased for 2-3 thousand rubles.
Models for showers and other similar rooms where the load is higher will cost 3-5 thousand.
The price of high-quality branded models reaches 15-20 thousand rubles, and sometimes even higher.

Armchair, chair or stool

Sometimes the simplest things turn out to be the most successful. If there is enough space in the hallway for a traditional chair, why not put it in? Is there anything more comfortable?

Chairs and stools are also appropriate here. Preference is usually given to models with an original design - they give the interior of the hallway a special zest.

There are combined models of chairs with a clothes hanger. This is a wonderful proposal for a small hallway in a minimalist style.

Rules for choosing and purchasing a suitable seat

When choosing a seat, you are primarily guided by the conditions of the room where it is intended to be used, as well as the mode of operation:

Public spaces are subject to heavy traffic and careless use. Choose a reliable design, without any frills, without soft lining.
Rooms with high humidity (showers, bathrooms, baths, saunas) require the use of stainless materials. In addition, it is necessary to take into account the temperature regime.
For hallways and corridors, it is necessary to choose a design that fits into the design as much as possible or is as inconspicuous as possible.
Outdoor use (unheated loggias, balconies, open and closed verandas) involves the use of materials that are resistant to temperature changes and precipitation.

Preference should be given to high-quality plastic, processed wood, and stainless steel.

You also need to decide on the location of the folding chair. Sometimes it is worth considering the option of corner placement.

When purchasing a product, pay attention to the completeness, comparing it with the passport. If the design of the device provides for complex hinges or spring mechanisms, it is necessary to ensure that they are in good working order, as well as normal functioning.

There should be no damage on the surface of the products: scratches, chips, signs of corrosion.

It is worth checking (at least approximately) that the anchors included in the kit will provide reliable fastening. In this case, the material and thickness of the walls are taken into account.

If the package does not include anchor fasteners, it must be purchased additionally.

Box

Another idea for a vintage hallway. An old (or antique) chest has an impressive appearance and is of sufficient height. Inside the chest you can store boxes of shoes. Well, the lid, complemented by a soft mat, rug or pillows, successfully copes with the role of a bench.

The chest will fit perfectly into the hallway not only in vintage, but also in other styles: for example, rustic, country, shabby chic.

What types of shoe cabinets are there?

A shoe rack is usually understood as a cabinet or cabinet designed for storing boots, shoes, and sneakers. Another widespread name for the item is galoshnitsa.

The simplest models that can be found on the market are low cabinets with open or closed shelves.

Modern manufacturers are increasingly offering customers products with advanced functionality.

They are additionally equipped with seats, mirrors, key holders, drawers for small items, clothes hangers, and shelves for hats. However, when choosing such items, you should remember the area of the room.

In small hallways, narrow, tall shoe racks with hinged doors are usually installed.

They have a number of advantages over their counterparts:

Capacity. These cabinets are equipped with several rows of shelves. Usually these are two, three or four rows. They can easily fit the shoes of all family members.
Small sizes. The narrowest models that can be found in furniture stores are about twenty centimeters wide. Shoes in them are placed vertically. The height depends on the number of shelves. The tallest models can reach one and a half meters, the lowest - fifty centimeters.
Aesthetic appearance. Folding doors hide shoes from prying eyes and protect them from dust, small children and pets.

A closed shoe storage system can be made in different ways. All models can be divided into several groups:

With folding shelves.

A shoe rack in a hallway with folding shelves usually has a shallow depth; they vary in height and width - low and wide, narrow and high. Their distinctive feature is a shelf attached to the door, and this structure is fixed on rotary hinges.

When you pull the handle on the door, it rotates on its hinges, allowing access to the contents of the drawer.

With hinged doors.

This is an ordinary shoe cabinet, of a wide variety of sizes, for different numbers of shoes.

With sliding doors.

These models are good if the hallway is very narrow and open doors will get in the way. Such furniture for storing shoes is called a chest of drawers or (cabinet) for shoes. There is no clear division. Everyone uses the name they like best.

Closed models

Closed models of shoe racks are called a shoe cabinet or chest of drawers. They vary in size. Height - from 50 cm to 220 cm, width - from 30 to 120 cm, depth - from 17 to 55 cm. Next, we will consider how tall a shoe rack in the hallway can be. It is this factor that is considered first.

Low boots

Low overshoes are made up to 50-55 cm high. They usually have only one shelf, on which one person’s seasonal shoes can be placed. And only if he is not very keen on buying new shoes/sandals/boots.

Occasionally, two low shelves are made in a low shoe rack.

Only summer or autumn shoes without heels can be placed normally. Boots and even boots will no longer fit on such shelves. Unless you put them sideways.

The advantage of a low chest of drawers for shoes can be the seat.

That is, in your hallway there is not just a bench/banquette for putting on shoes, but furniture for shoes with a seat. Rational use of all available space is what this option also provides.

Medium height

With a height of 60 to 120 cm, the shelves are already enough to accommodate the shoes of a family of 3-4 people. In this segment there are chests of drawers for shoes with open shelves, which are placed on the sides of the shoe shelves.

Most often there is a long and narrow section for storing an umbrella. Ladies can adapt this section to high boots.

There are models of chests of drawers for shoes in the upper part of which there is a shelf for small items; there are also drawers for storing gloves, keys, etc. To make efficient use of space, you can hang a mirror or a wall hanger above the shoe cabinet.

Tall shoe cabinets

Perhaps the most interesting category. It makes sense to take these shoe racks in the hallway at the same height as the closet (if you have one in your hallway). Even though not all shelves can be easily reached, you can put off-season or weekend shoes on the top ones.

In addition to traditional shoe cabinets with hinged doors, there is a narrow shoe cabinet with pull-out shelves.

This option is good if you have a small distance - 30-40 cm - between, say, a closet and a wall. It is in such niches that you can put such narrow and deep shoe cabinets. They are also called “shoe cases”.

A closed shoe rack in the hallway is good because the doors reliably hide order or disorder. The second positive point is aesthetic. Many people like these models better than open shelves. Closed models also have disadvantages. The first is that shoes dry in them longer, the second is that their price is higher, since more material is required.

Hallway seat: useful tips

If elderly people live in the house, you should prefer a more or less high seat. Low ottomans and banquettes are extremely uncomfortable not only for the elderly, but also for people who have suffered injuries.

The optimal upholstery for a soft seat is leather or made from a leather substitute. The hallway can be both dirty and wet, so the ability to clean is very important. But if you decide to go with fabric, choose non-staining samples.

A soft mattress for a bench, cabinet or chest can be ordered from almost any studio that specializes in sewing bedspreads, pillows, and curtains. It will be necessary to purchase not only upholstery material, but also filler (for example, foam rubber), as well as capitonné buttons if you want to get a quilted product. By the way, if the upholstery is not leather, it is worth ordering a couple of removable covers.

Types of wall mountings for reclining seats and their design features

All reclining seat systems are conventionally divided into four types:

Unsupported, or cantilever. Supports the weight of a sitting person only due to the stopper on the swivel hinge. Therefore, in the manufacture of this unit it is necessary to use durable materials.
With additional support on the floor. This type has one or a pair of legs that fold down when the seat is lowered and resemble the legs of a regular chair. The system is one of the most complex to implement, since the supports must be expanded and retracted simultaneously with the rotation of the seat itself. Photo 3
Supported on the wall. Intermediate option. It has a support foot that rests against the wall. It is inferior in complexity to the previous type, since the support is shorter.
Hanging systems. They are held in place by suspensions made in the form of levers or cables, which are attached above the plane of the seat. They are quite rare.

Bench – emphasis on upholstery

The main percentage of thematic designs have seating upholstery.

The design, convenience and durability of the entire structure directly depend on the quality of its material:

Textiles - represented by cotton fabric, velor or flock. Thick fabric and medium pile are welcome for abrasion resistance.

Leather – has different grooves and colors, but always comes with a frame made of real solid wood, which contributes to the overall luxury of the product

Leatherette is an analogue of real leather, which is designed to satisfy the requirements of an audience with average and below average purchasing power.

The choice of upholstery is very important if the target audience likes banquettes with a backrest in the hallway. The fact is that such models, due to the presence of a rear support, have a large volume of upholstery.
We recommend reading:
Hanger in the hallway - simple ideas and creative options for decorating hallways using hangers (90 photos + video)
Gray hallway - 125 photos of the best ideas for decorating gray hallways. Design rules and selection of interior elements
Arch in the hallway - the best ideas, design options and the best combinations of using arches in design (130 photos)

As for the durability of each type of upholstery, this point mainly depends on compliance with operating standards - preventing abrasion of the surface when sitting, daily dry wiping, cleaning the material with special means if necessary.

What material are banquettes made from?

There are various materials for the production of furniture in the hallway. Depending on this, it can be both budget and exclusive. Custom-made items may include hand-forged elements, inlays, and the addition of artistic elements. Depending on the features of the interior and needs, furnishings can be ordered from a workshop or, if you have the necessary skills, you can make them yourself.

Wooden frame.

Traditionally, various types of wood serve as the main material for furniture in the hallway interior. Banquettes with soft seats and storage compartments for shoes are also made of wood. To ensure durability, preserve color and texture, they are coated with several layers of special varnish, the composition of which allows not only to protect the furniture, but also to imitate the material of a more valuable species. With careful use, they will remain durable for many years, and with proper care they will retain a neat and pleasant appearance.

Custom-made furniture can look stylish and sophisticated, not only complementing, but also correctly emphasizing the overall design. For this purpose, sketches of classical models and decoration with carvings are used. An exclusive banquette in the hallway interior will emphasize the status of the apartment owner.

Not only an expensive item, but also ready-made wooden furniture bought in a store will perfectly complement the room. The wood can be treated, repainted, and the updated hallway will take on a new, fresh look without significant financial costs.

Metal frame.

Metal bases are also often used to produce banquettes for hallway interiors. Copper, steel, cast iron and bronze structures provide a durable frame for furniture. However, these models have their own characteristics. Firstly, cold metal is unpleasant for the body, so it is important that you can change shoes without touching metal elements. Secondly, they are heavy, so the interior must be designed in such a way that the item will not move. It is also important not to forget about the pads on the legs so as not to leave scratches on the floor.

Frame made of pressed wood and rattan.

Boards made from pressed wood shavings (MDF, chipboard) are also used in furniture production. However, the technology involves treating the panels with formaldehyde resins, which is undesirable for a hallway.

Rattan is another material that is used to make furniture. Dried and processed tropical (rattan) palm stems provide a durable and comfortable frame. A rattan bench in the hallway interior is complemented by a soft seat in the form of a pillow or cover. The cost of such a product will be slightly higher than its chipboard counterpart.

The upholstery material can be leather (natural or artificial) and fabric. Banquettes for the hallway interior are covered with silk, velor, jacquard, tapestry, etc. The choice depends on how wear-resistant or sophisticated the item should be. If you have the tools, you can replace the blade yourself.

The following are used as filling for the banquette:

Springs that give the seat elasticity and hold its shape well.
Polyurethane foam also has high rigidity and remains dense for a long time.
Latex filler, natural or synthetic, is the softest of all of these.
Foam rubber is used for the production of budget furniture because it has a low cost.

Bench - classification of structures

The area of the hallway of the room is different, which dictates that designers create unusual banquette designs. Already today the furniture market offers the following configurations:

Bench-ottoman – is a stool without legs, upholstered in leather, leather substitute or textiles;
A bench-ottoman is a compact “sofa” without a back or armrests, but with soft upholstery;
Banquette-bench - a model with a backrest and traditional amenities.

The conclusion suggests itself: the first two options, due to their compact size and lack of a backrest, are suitable for small and medium-sized hallways, while a banquette bench for the hallway is selected provided that the space is spacious enough.

We recommend reading:

Bench in the hallway - tips for choosing the optimal model and modern options for using the bench (95 photos + video)
Decorating the hallway with stone - decorative artificial and natural stone for hallways (125 photos)
Brick in the hallway - design options, decorative design elements and application features (95 photos)