How to clean hair from office chair wheels

0
11397

A computer chair is an indispensable attribute of a modern office, study or workspace in the home. It is comfortable, versatile - adapted to different parameters and weights. The chair holds the back well, fixes posture, which makes a person less tired and reduces the load on the musculoskeletal system. Despite its reliability, the chair sometimes breaks, which causes inconvenience. One of the most common breakdowns is damage to the wheels. That is why you need to know how to remove the wheels from an office chair and replace them if necessary. Such repairs do not require special knowledge or high costs - you can do it yourself without calling a specialist.

Why do wheels sometimes break?

There can be several reasons why wheels break:

• Pollution.
• Dust and dirt, clogging moving parts, reduce the service life of components.
• Large weight load.
• Uneven floor surface.
• Worn landing pin.
• Manufacturing defects.

Or it may turn out that the parts have simply exhausted their service life and are physically worn out. Naturally, buying new furniture because of such a problem is at least unreasonable. It is important to know how to remove wheels from an office chair. Then the problem will be solved quickly enough.

Recommendations from experts

If the wheel falls off on its own, you will not have to remove it from the mount. This situation greatly simplifies the task and the further algorithm of actions.

Turn the mount over and remove the remaining elements using a screwdriver. They can no longer be used, so just throw them in the trash. It is recommended to completely replace each fastening part. Choose wheels of the same brand, as different elements can make it difficult to move in a confined area. Comprehensive equipment replacement will significantly extend the life of your seat.

To replace the rollers on a chair, it is not necessary to contact specialists. To do this, you will need a little time, a minimum number of tools, as well as step-by-step instructions with comments. If replaced correctly, your device will last for many years.

The office chair has wheels at the very bottom, which are responsible for comfortable moving the chair over short distances without getting up from it. This option is very convenient to use, because they do not damage the floor covering and save working time perfectly. But sometimes situations arise when they need to be replaced immediately. Don’t panic and buy a new chair; you can deal with this problem yourself.

The device and principle of replacing the wheels of an office chair:

The mechanism for attaching the rollers is quite simple. To remove them, no auxiliary tools are needed. The wheels are inserted into special holes drilled in the crosspiece.

We offer a simple algorithm for replacing rollers:

1. Pull the rollers out of the cross. To do this, just pull them.
2. Remove the plastic covers from the crosspiece.
3. Remove the broken plugs and replace them with new ones.
4. Insert the new parts into the crosspiece, after putting on the covers.

Now let’s talk about how to clean the chair wheels from hair and other dirt. At the same time, the videos themselves are quite functional.

Procedure for cleaning wheels:

• Turn the chair over and inspect the wheels for hair, textile fibers, or animal fur. First of all, try to clean them by hand. If you succeed, the rollers will spin freely again, like new. Failed to clear manually? Use regular scissors.
• Now let's talk about how to remove casters from an office chair to clean them from dirt and dust. Turn the chair over and unscrew the mounting bolts.
• Clean the wheels of debris and dirt, and then wash them thoroughly.

Wait until they are completely dry before screwing the parts back on.

And of course, the most important thing is that it’s always easier to buy a new spare part from us:

730 ₽

Wheel set Bureaucrat BlockCastorSet3850/PU

450 ₽

Set of plugs Bureaucrat FootSet35

700 ₽

Wheel set Bureaucrat CastorSet3850/PU

Check out our new catalog chairs:

Gaming chairs

Staff chairs

Executive chairs

Reinforced seats up to 250 kg

How to remove wheels

After examining the possible problems, you can begin to fix the problem. Guide on how to remove a wheel from an office chair:

• turn the chair over and place it on a stable surface;
• try to detach the roller from the chair by hand;
• if necessary, pry up the casing with a slotted screwdriver, move it to the side, hook the wheel and pull it out.

Sometimes just disassembling the wheels is not enough. To transport or replace main parts, the chair must be completely disassembled. It can be done in several stages:

• the chair turns over, using a Phillips screwdriver, the bolts connecting the seat and the piastra, a device that adjusts the height of the chair, are unscrewed;
• the armrests are removed - the mounting bolts are removed;
• the gas lift is disconnected from the piastra by gently tapping the piastra with a rubber hammer;
• the backrest is removed from the chair - the special bolts connecting the backrest and seat are unscrewed;
• The crosspiece is removed - a ring drift is placed between the crosspiece and the gas lift and knocked out with a hammer.

Assembling a chair is more difficult than disassembling it. After removing the wheels from your office chair, you need to carefully pack all the parts so that not a single part gets lost.

Video

Share on social media networks:

Office chairs are convenient, comfortable furniture that has become widespread. They have become so popular due to their beautiful modern design, ergonomics and portability. The furniture is equipped with small wheels that allow you to move short distances without lifting your “fifth point” from the seat. In fact, it's very convenient. And office chair racing has become a slightly unusual, but quite spectacular sport. But, unfortunately, sometimes these parts become unusable. They must be immediately replaced with new ones or simply cleaned of dirt. Let's look at how to disassemble the wheel from the chair to clean it, as well as how to remove it to replace it with a new one. It's not difficult at all. You can cope with this problem yourself.

Read more: Kia Rio 2014 suspension

In what cases is it necessary

Before studying the question of how to remove a wheel from a computer chair, you need to find out the nature of the malfunction. Roller failures come in several forms:

• the wheel stops rotating;
• scratches the floor surface;
• falls out of the mount.

Read more: Audi 200 43 body photo
The reasons why the rollers on an office chair are damaged can be different:

• contamination - dust, dirt, threads, hair, falling on the wheel, clog it, interfere with proper functioning, which leads to premature wear;
• heavy weight - constant loads contribute to breakage of small parts, fasteners, including the wheel;
• mechanical damage – careless use often leads to malfunctions;
• unevenness on the floor - due to prolonged use of the chair in such conditions, the socket becomes loose;
• wear and tear – the lifespan of a computer chair is limited; over time, parts wear out and require replacement;
• manufacturing defects.

Regularly cleaning them from dirt and foreign objects will help prolong the life of your wheels. Thanks to such procedures, the rollers will be able to move freely without feeling any obstacles. Replacing broken parts is always easier and cheaper than buying a new chair - they are available and easy to install.

For carpeted floors, it is recommended to choose a chair with smooth wheels; for slippery surfaces, it is advisable to use rubberized casters.

Sequence of installation of new parts

After you have disassembled the office chair wheel, you can begin to inspect and possibly replace the broken elements. The option for repair and installation of new parts depends on the nature of the failure:

1. The rollers do not rotate. Possible cause: contamination. The chair is turned over, the wheels are detached and inspected. If there is dirt and dust, they are cleaned with a brush or scissors (if they are wrapped in hair or thread). After you have managed to clean the wheels, they need to be washed and dried. Dry rollers are installed in place.
2. The wheel falls out. Malfunction – the plug (the socket in the cross that secures the roller) is worn out. It needs to be replaced. To do this, the wheels are separated and the plastic protective covers are removed. Then, using a screwdriver, the plugs are pulled out. New sockets are installed, housings and rollers are returned to their place.
3. Wheel damage. The roller itself or the locking ring, which is located on the axis of the landing pin, has broken. Thanks to this detail, the rollers are springy. Many people do not know how to change wheels. There is nothing complicated about this. The broken part is disconnected, the socket is inspected for damage and foreign objects, and a new wheel is installed.

Read more: Changing the oil in the Ssangyong Chiron automatic transmission

In addition to damage to the rollers, other damage to the computer chair will occur:

1. Gas lift malfunction. This is a detail that is responsible for a person’s comfortable position while working. With its help, the chair takes the desired height and backrest position. If the gas lift is broken, the seat does not rise, falls strongly or skews to one side. There are two ways to repair the chair - replacing or fixing the gas lift in one position.
2. Broken crosspiece. This chair is quite durable, but if it breaks, the only way is to change it. Metal crosspieces are more durable and expensive, plastic ones are lighter and more affordable.
3. Backrest malfunction. If the backrest does not lock in the desired position and hangs, then it needs to be changed. If the permanent contact handle, which secures the backrest, does not work, it is advisable to replace the permanent contact.

When disassembling the chair, under no circumstances should you knock on the gas chamber. You need to remove the gas lift carefully, striking accurately along the edge.

Damaged computer chair wheels cause a lot of inconvenience. Finding out the cause of the breakdown and eliminating it is easy and simple. This does not require special knowledge or professional tools. You can do the repair yourself, without the help of a specialist. This will save time and money.